| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
The spi controller supports 44-bit address space on AXI in DMA mode,
so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping.
In addition, if dma_map_single fails, it should return immediately
instead of continuing doing the DMA operation which bases on invalid
address.
This fixes the following crash which occurs in reading a big block
from flash:
[ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots)
[ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped
[ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0
[ 123.792536] Mem abort info:
[ 123.795313] ESR = 0x96000145
[ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits
[ 123.803655] SET = 0, FnV = 0
[ 123.806693] EA = 0, S1PTW = 0
[ 123.809818] Data abort info:
[ 123.812683] ISV = 0, ISS = 0x00000145
[ 123.816503] CM = 1, WnR = 1
[ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000
[ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000
[ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: footbridge: fix PCI interrupt mapping
Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised. |
| DragonflyDB Dragonfly before 1.27.0 allows authenticated users to cause a denial of service (daemon crash) via a crafted Redis command. The validity of the scan cursor was not checked. |
| flask-session-captcha is a package which allows users to extend Flask by adding an image based captcha stored in a server side session. In versions prior to 1.2.1, he `captcha.validate()` function would return `None` if passed no value (e.g. by submitting an having an empty form). If implementing users were checking the return value to be **False**, the captcha verification check could be bypassed. Version 1.2.1 fixes the issue. Users can workaround the issue by not explicitly checking that the value is False. Checking the return value less explicitly should still work. |
| The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a denial of service (host OS panic or hang) by triggering many #DB (aka Debug) exceptions, related to svm.c. |
| D-Link DIR-823G A1V1.0.2B05 was discovered to contain Null-pointer dereferences in sub_4484A8(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472. |
| Huawei AR3200 with software V200R007C00, V200R005C32, V200R005C20; S12700 with software V200R008C00, V200R007C00; S5300 with software V200R008C00, V200R007C00, V200R006C00; S5700 with software V200R008C00, V200R007C00, V200R006C00; S6300 with software V200R008C00, V200R007C00; S6700 with software V200R008C00, V200R007C00; S7700 with software V200R008C00, V200R007C00, V200R006C00; S9300 with software V200R008C00, V200R007C00, V200R006C00; and S9700 with software V200R008C00, V200R007C00, V200R006C00 allow remote attackers to send abnormal Multiprotocol Label Switching (MPLS) packets to cause memory exhaustion. |
| fedora-arm-installer up to and including 1.99.16 is vulnerable to local privilege escalation due to lack of checking the error condition of mount operation failure on unsafely created temporary directories. |
| InspIRCd before 2.0.7 allows remote attackers to cause a denial of service (infinite loop). |
| Candlepin allows remote attackers to obtain sensitive information by obtaining Java exception statements as a result of excessive web traffic. |
| The setup_imginfo_jpg function in lepton/jpgcoder.cc in Dropbox lepton 1.0 allows remote attackers to cause a denial of service (segmentation fault) via a crafted jpeg file. |
| chain_sip in Asterisk Open Source 11.x before 11.23.1 and 13.x 13.11.1 and Certified Asterisk 11.6 before 11.6-cert15 and 13.8 before 13.8-cert3 allows remote attackers to cause a denial of service (port exhaustion). |
| Apache Xerces2 Java Parser before 2.12.0 allows remote attackers to cause a denial of service (CPU consumption) via a crafted message to an XML service, which triggers hash table collisions. |
| Huawei Quidway S9700 V200R003C00SPC500, Quidway S9300 V200R003C00SPC500, Quidway S7700 V200R003C00SPC500, Quidway S6700 V200R003C00SPC300, Quidway S6300 V200R003C00SPC300, Quidway S5700 V200R003C00SPC300, Quidway S5300 V200R003C00SPC300 enable attackers to launch DoS attacks by crafting and sending malformed packets to these vulnerable products. |
| A Denial of Service Vulnerability in 802.11 ingress packet processing of the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause the connection table to be full of invalid connections and be unable to process new incoming requests. More Information: CSCvb66659. Known Affected Releases: 8.2(130.0). Known Fixed Releases: 8.2(131.10) 8.2(131.6) 8.2(141.0) 8.3(104.56) 8.4(1.88) 8.4(1.91). |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| libjbig2dec.a in Artifex jbig2dec 0.13, as used in MuPDF and Ghostscript, has a NULL pointer dereference in the jbig2_huffman_get function in jbig2_huffman.c. For example, the jbig2dec utility will crash (segmentation fault) when parsing an invalid file. |
| Symantec SSL Visibility (SSLV) 3.8.4FC, 3.9, 3.10 before 3.10.4.1, and 3.11 before 3.11.3.1 is susceptible to a denial-of-service vulnerability that impacts the SSL servers for intercepted SSL connections. A malicious SSL client can, under certain circumstances, temporarily exhaust the TCP connection pool of an SSL server. |
| Memory leak in the IsOptionMember function in MagickCore/option.c in ImageMagick before 6.9.2-2, as used in ODR-PadEnc and other products, allows attackers to trigger memory consumption. |
