| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficient policy enforcement in Enterprise in Google Chrome on Mac prior to 151.0.7922.72 allowed a local attacker to perform privilege escalation via physical access to the device. (Chromium security severity: Low) |
| Insufficient validation of untrusted input in Extensions in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to perform privilege escalation via a crafted HTML page. (Chromium security severity: Low) |
| Race in Updater in Google Chrome on Windows prior to 151.0.7922.72 allowed a local attacker to perform privilege escalation via a malicious file. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Prevent UAF caused by non-leader exec() race
Wongi and Jungwoo decoded and reported a non-leader exec() related race
which can result in an UAF:
sys_timer_delete() exec()
posix_cpu_timer_del()
// Observes old leader
p = pid_task(pid, pid_type); de_thread()
switch_leader();
release_task(old_leader)
__exit_signal(old_leader)
sighand = lock(old_leader, sighand);
posix_cpu_timers*_exit();
sighand = lock_task_sighand(p) unhash_task(old_leader);
sh = lock(p, sighand) old_leader->sighand = NULL;
unlock(sighand);
(p->sighand == NULL)
unlock(sh)
return NULL;
// Returns without action
if(!sighand)
return 0;
free_posix_timer();
This is "harmless" unless the deleted timer was armed and enqueued in
p->signal because on exec() a TGID targeted timer is inherited.
As sys_timer_delete() freed the underlying posix timer object
run_posix_cpu_timers() or any timerqueue related add/delete operations on
other timers will access the freed object's timerqueue node, which results
in an UAF.
There is a similar problem vs. posix_cpu_timer_set(). For regular posix
timers it just transiently returns -ESRCH to user space, but for the use
case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is
allocated on the stack.
Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops
to expire.
While debating solutions Frederic pointed out another problem:
posix_cpu_timer_del(tmr)
__exit_signal(p)
posix_cpu_timers*_exit(p);
unhash_task(p);
p->sighand = NULL;
sh = lock_task_sighand(p)
sighand = p->sighand;
if (!sighand)
return NULL;
lock(sighand);
if (!sh)
WARN_ON_ONCE(timer_queued(tmr));
On weakly ordered architectures it is not guaranteed that
posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit()
when p->sighand is observed as NULL, which means the WARN() can be a false
positive.
Solve these issues by:
1) Changing the store in __exit_signal() to smp_store_release().
2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path
of lock_task_sighand().
3) Creating a helper function for looking up the task and locking sighand
which does not return when sighand == NULL. Instead it retries the
task lookup and only if that fails it gives up.
4) Using that helper in the three affected functions.
#1/#2 ensures that the reader side which observes sighand == NULL also
observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit()
and the ones in unhash_task().
#3 ensures that the above described non-leader exec() situation is handled
gracefully. When the task lookup returns the old leader, but sighand ==
NULL then it retries. In the non-leader exec() case the subsequent task
lookup will observe the new leader due to #1/#2. In normal exit() scenarios
the subsequent lookup fails.
When the task lookup fails, the function also checks whether the timer is
still enqueued and issues a warning if that's the case. Unfortunately there
is nothing which can be done about it, but as the task is already not
longer visible the timer should not be accessed anymore. This check also
requires memory ordering, which is not provided when the first lookup
fails. To achieve that the check is preceeded by a smp_rmb() which pairs
with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that
the stores in posix_cpu_timers*_exit() are visible.
The history of the non-leader exec() issue goes back to the early days of
posix CPU timers, which stored a pointer to the group leader task in the
timer. That obviously fails when a non-leader exec() switches the leader.
commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems
with mt exec") added a temporary workaround for that in 2010 which surv
---truncated--- |
| A flaw was found in Dogtag PKI's ACME responder where the HTTP-01 challenge validator accepts IP address literals as dns identifiers and follows HTTP redirects without validating that the target is a public address. An unauthenticated ACME account holder can exploit this to perform server-side request forgery (SSRF), making the Dogtag server send HTTP GET requests to internal network services. With the InMemory database backend, the response body of internal targets is disclosed to the attacker through the ACME challenge error. |
| Insufficient validation of untrusted input in BFCache in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient validation of untrusted input in Payments in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| A path traversal vulnerability was found in the Wallpaper component of ADM. The vulnerability occurs because user-controlled wallpaper path input is not sufficiently validated before being used for file access. An authenticated attacker can exploit this issue to access or manipulate files outside the intended wallpaper directory, subject to user permissions and filesystem restrictions.
Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RUN1 as well as from ADM 5.0.0 through ADM 5.1.3.RI81. |
| Inappropriate implementation in Blink in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| A path traversal vulnerability was found in the VPN Clients on the ADM. The vulnerability occurs because user-controlled certificate name input is not sufficiently validated before being used to construct the upload destination path. An authenticated attacker can exploit this issue to write an uploaded certificate file outside the intended VPN certificate directory, subject to process privileges and filesystem permissions.
Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RUN1 as well as from ADM 5.0.0 through ADM 5.1.3.RI81. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix len check in receive_big()
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: check master for NULL in xdp_master_redirect()
xdp_master_redirect() dereferences the result of
netdev_master_upper_dev_get_rcu() without a NULL check, but that helper
returns NULL when the receiving device has no upper-master adjacency.
The reach guard only checks netif_is_bond_slave(). On bond slave release
bond_upper_dev_unlink() drops the upper-master adjacency before clearing
IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window
still passes netif_is_bond_slave() while master is already NULL, and
faults on master->flags at offset 0xb0:
BUG: kernel NULL pointer dereference, address: 00000000000000b0
RIP: 0010:xdp_master_redirect (net/core/filter.c:4432)
Call Trace:
xdp_master_redirect (net/core/filter.c:4432)
bpf_prog_run_generic_xdp (include/net/xdp.h:700)
do_xdp_generic (net/core/dev.c:5608)
__netif_receive_skb_one_core (net/core/dev.c:6204)
process_backlog (net/core/dev.c:6319)
__napi_poll (net/core/dev.c:7729)
net_rx_action (net/core/dev.c:7792)
handle_softirqs (kernel/softirq.c:622)
__dev_queue_xmit (include/linux/bottom_half.h:33)
packet_sendmsg (net/packet/af_packet.c:3082)
__sys_sendto (net/socket.c:2252)
Kernel panic - not syncing: Fatal exception in interrupt
The missing check dates back to the original code; commit 1921f91298d1
("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master")
later added the master->flags read where the fault now lands but kept the
unconditional deref. Check master for NULL before use; a NULL master is
treated the same as one that is not up. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix use-after-free of the discoverer in tipc_disc_rcv()
bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),
but tipc_disc_rcv() still dereferences b->disc in RX softirq under
rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).
L2 bearers are safe thanks to the synchronize_net() in
tipc_disable_l2_media(), but the UDP bearer defers that call to the
cleanup_bearer() workqueue, so the discoverer is freed with no grace
period:
BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149)
Read of size 8 at addr ffff88802348b728 by task poc_tipc/184
<IRQ>
tipc_disc_rcv (net/tipc/discover.c:149)
tipc_rcv (net/tipc/node.c:2126)
tipc_udp_recv (net/tipc/udp_media.c:391)
udp_rcv (net/ipv4/udp.c:2643)
ip_local_deliver_finish (net/ipv4/ip_input.c:241)
</IRQ>
Freed by task 181:
kfree (mm/slub.c:6565)
bearer_disable (net/tipc/bearer.c:418)
tipc_nl_bearer_disable (net/tipc/bearer.c:1001)
The bearer is freed with kfree_rcu(); free the discoverer the same way.
Add an rcu_head to struct tipc_discoverer and free it and its skb from an
RCU callback.
Because the RCU callback (tipc_disc_free_rcu) lives in module text, a
call_rcu() that is still pending when the tipc module is unloaded would
invoke a freed function. Add an rcu_barrier() to tipc_exit() after the
bearer subsystem has been torn down, so all pending discoverer callbacks
have run before the module text goes away.
Reachable from an unprivileged user namespace: the TIPCv2 genl family is
netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC
and CONFIG_TIPC_MEDIA_UDP. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject oversized nested action attrs
Open vSwitch stores generated flow actions as nlattrs, whose nla_len
field is u16. Commit a1e64addf3ff ("net: openvswitch: remove
misbehaving actions length check") allowed the total sw_flow_actions
stream to grow beyond 64 KiB, which is valid, but also removed the last
guard preventing a generated nested action attribute from exceeding
U16_MAX.
An oversized generated container can thus be closed with a truncated
nla_len. A later dump or teardown then walks a structurally different
stream than the one that was validated. In particular, an oversized
nested CLONE/CT action may cause subsequent bytes in the generated
stream to be interpreted as independent actions.
Keep the larger total-action-stream behavior, but make nested action
close reject generated containers that do not fit in nla_len, and return
the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and
CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse
construction order before discarding failed wrappers, so resources copied
into the rejected tails are released before the wrappers are removed.
Most failed outer wrappers are discarded by truncating actions_len after
child resources have been released. CHECK_PKT_LEN also trims its parent
after branch resources are gone. SET/TUNNEL close failures unwind their
known tun_dst ownership directly, and SET_TO_MASKED has no external
ownership and truncates on close failure. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
