| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Stop active perfmon if it is being destroyed
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed"). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Explicitly verify target vCPU is online in kvm_get_vcpu()
Explicitly verify the target vCPU is fully online _prior_ to clamping the
index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will
generate '0', i.e. KVM will return vCPU0 instead of NULL.
In practice, the bug is unlikely to cause problems, as it will only come
into play if userspace or the guest is buggy or misbehaving, e.g. KVM may
send interrupts to vCPU0 instead of dropping them on the floor.
However, returning vCPU0 when it shouldn't exist per online_vcpus is
problematic now that KVM uses an xarray for the vCPUs array, as KVM needs
to insert into the xarray before publishing the vCPU to userspace (see
commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")),
i.e. before vCPU creation is guaranteed to succeed.
As a result, incorrectly providing access to vCPU0 will trigger a
use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu()
bails out of vCPU creation due to an error and frees vCPU0. Commit
afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but
in doing so introduced an unsolvable teardown conundrum. Preventing
accesses to vCPU0 before it's fully online will allow reverting commit
afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: dispcc-sm6350: Add missing parent_map for a clock
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for the clock where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix crash during unbind if gpio unit is in use
We used the wrong device for the device managed functions. We used the
usb device, when we should be using the interface device.
If we unbind the driver from the usb interface, the cleanup functions
are never called. In our case, the IRQ is never disabled.
If an IRQ is triggered, it will try to access memory sections that are
already free, causing an OOPS.
We cannot use the function devm_request_threaded_irq here. The devm_*
clean functions may be called after the main structure is released by
uvc_delete.
Luckily this bug has small impact, as it is only affected by devices
with gpio units and the user has to unbind the device, a disconnect will
not trigger this error. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-pcm: don't use soc_pcm_ret() on .prepare callback
commit 1f5664351410 ("ASoC: lower "no backend DAIs enabled for ... Port"
log severity") ignores -EINVAL error message on common soc_pcm_ret().
It is used from many functions, ignoring -EINVAL is over-kill.
The reason why -EINVAL was ignored was it really should only be used
upon invalid parameters coming from userspace and in that case we don't
want to log an error since we do not want to give userspace a way to do
a denial-of-service attack on the syslog / diskspace.
So don't use soc_pcm_ret() on .prepare callback is better idea. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gcc-sm6350: Add missing parent_map for two clocks
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for two clocks where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
The nvmem interface supports variable buffer sizes, while the regmap
interface operates with fixed-size storage. If an nvmem client uses a
buffer size less than 4 bytes, regmap_read will write out of bounds
as it expects the buffer to point at an unsigned int.
Fix this by using an intermediary unsigned int to hold the value. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: prohibit deactivating all links
In the internal API this calls this is a WARN_ON, but that
should remain since internally we want to know about bugs
that may cause this. Prevent deactivating all links in the
debugfs write directly. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Fix ida_free call while not allocated
In the rproc_alloc() function, on error, put_device(&rproc->dev) is
called, leading to the call of the rproc_type_release() function.
An error can occurs before ida_alloc is called.
In such case in rproc_type_release(), the condition (rproc->index >= 0) is
true as rproc->index has been initialized to 0.
ida_free() is called reporting a warning:
[ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164
[ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0
[ 4.188854] ida_free called for id=0 which is not allocated.
[ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000
[ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+)
[ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442
[ 4.231481] Hardware name: STM32 (Device Tree Support)
[ 4.236627] Workqueue: events_unbound deferred_probe_work_func
[ 4.242504] Call trace:
[ 4.242522] unwind_backtrace from show_stack+0x10/0x14
[ 4.250218] show_stack from dump_stack_lvl+0x50/0x64
[ 4.255274] dump_stack_lvl from __warn+0x80/0x12c
[ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188
[ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164
[ 4.270565] ida_free from rproc_type_release+0x38/0x60
[ 4.275832] rproc_type_release from device_release+0x30/0xa0
[ 4.281601] device_release from kobject_put+0xc4/0x294
[ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c
[ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4
[ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc]
[ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc
Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is
properly set. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: Don't free command immediately
Don't prematurely free the command. Wait for the status completion of
the sense status. It can be freed then. Otherwise we will double-free
the command. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix potential NULL pointer dereference in atomctrl_get_smc_sclk_range_table
The function atomctrl_get_smc_sclk_range_table() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to
retrieve SMU_Info table, it returns NULL which is later dereferenced.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In practice this should never happen as this code only gets called
on polaris chips and the vbios data table will always be present on
those chips. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: check folio mapping after unlock in relocate_one_folio()
When we call btrfs_read_folio() to bring a folio uptodate, we unlock the
folio. The result of that is that a different thread can modify the
mapping (like remove it with invalidate) before we call folio_lock().
This results in an invalid page and we need to try again.
In particular, if we are relocating concurrently with aborting a
transaction, this can result in a crash like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 76 PID: 1411631 Comm: kworker/u322:5
Workqueue: events_unbound btrfs_reclaim_bgs_work
RIP: 0010:set_page_extent_mapped+0x20/0xb0
RSP: 0018:ffffc900516a7be8 EFLAGS: 00010246
RAX: ffffea009e851d08 RBX: ffffea009e0b1880 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffc900516a7b90 RDI: ffffea009e0b1880
RBP: 0000000003573000 R08: 0000000000000001 R09: ffff88c07fd2f3f0
R10: 0000000000000000 R11: 0000194754b575be R12: 0000000003572000
R13: 0000000003572fff R14: 0000000000100cca R15: 0000000005582fff
FS: 0000000000000000(0000) GS:ffff88c07fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000407d00f002 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x78/0xc0
? page_fault_oops+0x2a8/0x3a0
? __switch_to+0x133/0x530
? wq_worker_running+0xa/0x40
? exc_page_fault+0x63/0x130
? asm_exc_page_fault+0x22/0x30
? set_page_extent_mapped+0x20/0xb0
relocate_file_extent_cluster+0x1a7/0x940
relocate_data_extent+0xaf/0x120
relocate_block_group+0x20f/0x480
btrfs_relocate_block_group+0x152/0x320
btrfs_relocate_chunk+0x3d/0x120
btrfs_reclaim_bgs_work+0x2ae/0x4e0
process_scheduled_works+0x184/0x370
worker_thread+0xc6/0x3e0
? blk_add_timer+0xb0/0xb0
kthread+0xae/0xe0
? flush_tlb_kernel_range+0x90/0x90
ret_from_fork+0x2f/0x40
? flush_tlb_kernel_range+0x90/0x90
ret_from_fork_asm+0x11/0x20
</TASK>
This occurs because cleanup_one_transaction() calls
destroy_delalloc_inodes() which calls invalidate_inode_pages2() which
takes the folio_lock before setting mapping to NULL. We fail to check
this, and subsequently call set_extent_mapping(), which assumes that
mapping != NULL (in fact it asserts that in debug mode)
Note that the "fixes" patch here is not the one that introduced the
race (the very first iteration of this code from 2009) but a more recent
change that made this particular crash happen in practice. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE
There is a WARN_ON_ONCE to catch an unlikely situation when
domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless
happens we must avoid using a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Grab intel_display from the encoder to avoid potential oopsies
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()... |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - do not transfer req when tegra init fails
The tegra_cmac_init or tegra_sha_init function may return an error when
memory is exhausted. It should not transfer the request when they return
an error. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors
misc_minor_alloc was allocating id using ida for minor only in case of
MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids
using ida_free causing a mismatch and following warn:
> > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f
> > ida_free called for id=127 which is not allocated.
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
...
> > [<60941eb4>] ida_free+0x3e0/0x41f
> > [<605ac993>] misc_minor_free+0x3e/0xbc
> > [<605acb82>] misc_deregister+0x171/0x1b3
misc_minor_alloc is changed to allocate id from ida for all minors
falling in the range of dynamic/ misc dynamic minors |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: Fix an error check in npcm_video_ece_init()
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports. |
| In the Linux kernel, the following vulnerability has been resolved:
seccomp: passthrough uretprobe systemcall without filtering
When attaching uretprobes to processes running inside docker, the attached
process is segfaulted when encountering the retprobe.
The reason is that now that uretprobe is a system call the default seccomp
filters in docker block it as they only allow a specific set of known
syscalls. This is true for other userspace applications which use seccomp
to control their syscall surface.
Since uretprobe is a "kernel implementation detail" system call which is
not used by userspace application code directly, it is impractical and
there's very little point in forcing all userspace applications to
explicitly allow it in order to avoid crashing tracked processes.
Pass this systemcall through seccomp without depending on configuration.
Note: uretprobe is currently only x86_64 and isn't expected to ever be
supported in i386.
[kees: minimized changes for easier backporting, tweaked commit log] |
