| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix condition in 'nand_select_target()'
'cs' here must be in range [0:nanddev_ntargets[. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: centalize $INDEX_ROOT header validation
Add a dedicated helper to perform stricter validation of $INDEX_ROOT and
use it for both directory inodes and named index inodes. This keeps the
root size and header geometry checks consistent across both read paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index block header more strictly
Modify ntfs_index_block_inconsisent() to perform stricter validation of
INDEX_HEADER geometry in INDX blocks, and update
ntfs_lookup_inode_by_name() to use that function to validate INDX
blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: bound to_move in indx_insert_into_root before hdr_insert_head
indx_insert_into_root() promotes a full resident $INDEX_ROOT into
$INDEX_ALLOCATION and copies all non-last resident root entries into
a newly allocated INDEX_BUFFER via hdr_insert_head(). The source
byte count 'to_move' is summed from the on-disk resident entry sizes
and is independent of the destination buffer size, which comes from
root->index_block_size (via indx->index_bits).
A crafted NTFS image that keeps a valid, full resident root but
shrinks root->index_block_size down to 512 after the root has been
populated makes hdr_insert_head() memcpy attacker-controlled resident
entry bytes past the end of the kmalloc(1u << indx->index_bits)
allocation returned by indx_new(). For a 512-byte destination and a
resident root whose non-last entries total 560 bytes, the memcpy
overruns by 120 bytes and a following memmove extends the highest
written offset to 136 bytes past the allocation. The overflow bytes
are a direct copy of on-disk entries (via kmemdup), so they are
fully attacker-controlled.
The write is reachable from unprivileged open(O_CREAT) on a mounted
crafted NTFS image: a single sufficiently long create in a directory
whose resident root is already full forces root promotion and
triggers the copy.
This is a controlled out-of-bounds write of 120-136 bytes past a
kmalloc(index_block_size) allocation, with attacker-controlled
content. It is a bounded adjacent-heap corruption primitive; it is
not an arbitrary-address write. Successful exploitation into a named
victim object depends on the surrounding slab layout.
Reject the copy at the sink. The destination's INDEX_HDR already
reports hdr_total (the payload capacity of the new buffer) and
hdr_used (the bytes already consumed by the terminal END entry
installed by indx_new()); require that to_move fits in the remaining
payload before calling hdr_insert_head(). On mismatch, fail with
-EINVAL and mark the filesystem as having a detected on-disk
inconsistency, which is the same behaviour as the surrounding
validation in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound attr_off in UpdateResidentValue against data_off
In do_action()'s UpdateResidentValue case (fslog.c:3307),
lrh->attr_off and lrh->redo_len come from the on-disk LRH.
When they satisfy aoff + dlen < attr->res.data_off, the
assignment
attr->res.data_size = cpu_to_le32(aoff + dlen - data_off);
underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1,
data_off=0x18). Subsequent code that reads attr->res.data_size
to walk the resident attribute payload would then read up to
4 GiB past the 1024-byte MFT record allocation.
The existing mi_enum_attr() defense in fs/ntfs3/record.c:287
catches the corrupted data_size on the next attribute walk
and fails the mount, but only on the path that walks all
attributes. A read site that picks an attribute by name and
reads its data_size without re-validating is not covered.
Validate aoff against data_off and asize at the source.
Reproduced under UML+KASAN on mainline 8d90b09e6741 via
pr_warn-only probe: with aoff=0x10 and data_off=0x18, the
post-assignment data_size is 0xfffffff9 (mount then fails
at -22 from mi_enum_attr).
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes] |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate attribute values on lookup
ntfs_attr_find() and ntfs_external_attr_find() check that generic
resident attribute values fit in their attribute records and that
fixed-size resident values are large enough. For variable-length resident
formats, however, the fixed part is not enough: embedded length fields
can still point callers past the resident value.
A crafted image can set a small resident $FILE_NAME value_length while
leaving file_name_length large. Callers then trust file_name_length and
read past the resident value when converting or comparing the name. This
was reproduced with a crafted image under KASAN as a slab-out-of-bounds
read from the kmalloc-1k MFT record copy. The stack included
ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),
ntfs_ucstonls(), and utf16s_to_utf8s().
Add a shared attribute value validator and use it before a lookup path
can return an attribute, including the AT_UNUSED enumeration case where
callers inspect returned attributes directly. The helper validates
resident value bounds, minimum resident value sizes, variable-length
$FILE_NAME fields, and non-resident mapping-pairs metadata that was
previously checked separately in both lookup paths.
This also preserves the intended resident @val matching semantics in the
external attribute lookup path. The old duplicated validation block
overwrote the actual resident value length with the type-specific minimum
length before comparing @val, so variable-length resident values could
fail to match even when the bytes were identical. Keep the comparison on
the actual value length, and make ntfs_attrlist_entry_add() compare
resident attributes with lowest_vcn zero instead of reading the
non-resident union member after a successful resident match.
Reject non-resident $FILE_NAME records too: the format requires
$FILE_NAME to be resident and callers treat returned records as resident. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix off-by-one in mapping pairs decoding bounds checks
In ntfs_mapping_pairs_decompress(), attr_end points one byte past the
end of the attribute record:
attr_end = (u8 *)attr + le32_to_cpu(attr->length);
The two bounds checks validating that mapping pair data bytes fit within
the attribute use strict greater-than (>), which allows a one-byte
out-of-bounds read when the data extends exactly to attr_end:
b = *buf & 0xf;
if (b) {
if (unlikely(buf + b > attr_end)) // off-by-one
goto io_error;
for (deltaxcn = (s8)buf[b--]; b; b--)
deltaxcn = (deltaxcn << 8) + buf[b];
}
When buf + b == attr_end, the check evaluates to false and buf[b] reads
one byte past the valid attribute boundary. The same pattern appears in
the LCN delta bytes check.
Fix both checks to use >= so that buf[b] at exactly attr_end is
correctly rejected as out of bounds. |
| A vulnerability was found in lwIP up to 2.2.1. Affected is the function snmp_parse_inbound_frame of the file src/apps/snmp/snmp_msg.c of the component snmpv3 USM Handler. Performing a manipulation of the argument msgAuthenticationParameters results in stack-based buffer overflow. The attack may be initiated remotely. The patch is named 0c957ec03054eb6c8205e9c9d1d05d90ada3898c. It is suggested to install a patch to address this issue. Two separate issue reports were submitted to the project. Their processing was merged as a duplicate. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: avoid OOB read of num_dests header
Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is
attempted to check whether enough space is actually in the network header.
But instead of using offsetofend() to check for the whole size (2) which
must be accessible, offsetof() of is called. The latter is always returning
0. The comparison with the network header length will always return that
enough data is available - even when only 1 or 0 bytes are accessible.
Instead of using offsetofend(), use the more common check for the whole
header. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: uleds: Fix potential buffer overread
The name string supplied by userspace is not guaranteed to be
null-terminated, so using strchr() on it might result in a buffer
overread. The same thing will happen when said string is used by
the LED class device.
Fix this by using strnchr() instead and explicitly check that
the name string is properly null-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: fix off-by-one in BD ring consumption on build_skb failure
qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a
NULL return from qede_build_skb(). When it returns NULL under memory
pressure, the functions still consume a BD from the ring before
returning NULL. The callers then recycle additional BDs, resulting in
one extra BD being consumed (off-by-one). This desynchronizes the BD
ring, which can corrupt DMA page reference counts and lead to SLUB
freelist corruption.
Commit 4e910dbe3650 ("qede: confirm skb is allocated before using")
added a NULL check inside qede_build_skb() to prevent a NULL pointer
dereference, but did not address the missing NULL checks in the
callers, making this off-by-one reachable.
Fix this by adding NULL checks for the return value of
qede_build_skb() in both qede_rx_build_skb() and
qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring
manipulation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Check irq validity in kvm_vcpu_ioctl_interrupt()
Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here
add irq validility cheking in kvm_vcpu_ioctl_interrupt(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: ensure inner headers in ICMP errors are in headroom
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_lookup: fix catchall element handling with inverted lookups
nft_lookup_eval() decides whether a lookup matched (`found`) from the
direct set lookup and priv->invert before falling back to the
catchall element used by interval sets (e.g. nft_set_rbtree) for the
open-ended default range. Since `found` is never recomputed after
`ext` is replaced by the catchall lookup, inverted lookups
(NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the
catchall element, producing the wrong verdict. Fold the catchall
lookup into `ext` before computing `found`, matching the order
already used by nft_objref_map_eval(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_connmark: reject invalid shift parameters
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
Currently defined VF/PF relay actions use regular REQUEST messages
only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT
messages as this would result in breaking the VFPF ABI protocol
and also might trigger an assert on the PF side.
(cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) |
