| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Only self-managed Grafana instances with Auth Proxy authentication and identity caching enabled (sync_ttl greater than zero) are affected. The Auth Proxy cache key concatenated the username and forwarded identity attributes without a delimiter, so distinct identities could collide on one key. An authenticated user who shapes their own attributes to collide with a higher-privileged user's, while that user's cache entry is live, is authenticated as that user, up to Administrator (authentication bypass by spoofing). |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote unauthenticated attacker to gain access to sensitive information through session IP binding bypass in Navigator for i. |
| Kuma is a modern Envoy-based service mesh that can run on every cloud across both Kubernetes and VMs. Prior to 2.7.26, 2.9.16, 2.11.14, 2.12.11, and 2.13.7, Universal mode kuma-dp connections to an HTTPS control plane disable TLS peer verification when --ca-cert-file is not supplied and KUMA_CONTROL_PLANE_CA_CERT is unset. The dataplane authentication token is sent over the unverified connection, allowing an on-path attacker to intercept the token, impersonate the control plane, inject a forged bootstrap configuration, and take over the proxy. Standard Kubernetes installations created by kumactl install control-plane or the official Helm chart are unaffected because the mutating admission webhook injects KUMA_CONTROL_PLANE_CA_CERT into each sidecar. This issue is fixed in versions 2.7.26, 2.9.16, 2.11.14, 2.12.11, and 2.13.7. |
| Cosmos provides users the ability self-host a home server by acting as a secure gateway to your application, as well as a server manager. Prior to 0.22.19, tokenMiddleware in src/proxy/routerGen.go can return through the Constellation tunnel bypass before removing x-cosmos-user, x-cosmos-role, x-cosmos-user-role, and x-cosmos-mfa headers and before invoking AdminOnlyWithRedirect. An attacker with a valid x-cstln-auth API key for an enrolled device who reaches Cosmos through the Constellation Nebula tunnel can supply a chosen x-cosmos-user value to a route with AuthEnabled enabled when the upstream application trusts that forward-auth header. The request can bypass Cosmos JWT, password, MFA, and AdminOnly checks, allowing user impersonation and admin-tier reads or writes exposed by the proxied application. This issue is fixed in version 0.22.19. |
| Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.56, and from 3.0.0 until 3.7.12, a client-supplied dot-form header such as X.Authenticated.User survives ForwardAuth replacement and underscoreHeadersStrategy because Go treats it as distinct from X-Authenticated-User while normalization-prone CGI, WSGI, PHP, and NGINX backends collapse both names. A backend can consequently consume the client value instead of the identity Traefik asserted, allowing identity spoofing for any header managed by Traefik. The aliasHeadersStrategy protection is disabled by default and must be configured as delete or reject. The mitigation is available in 2.11.56 and 3.7.12. |
| undici's BalancedPool constructor passes its entire options object through an internal deep-clone that serializes and reparses the value as JSON. Because JSON cannot represent functions, any function-valued TLS option, such as a caller-supplied checkServerIdentity callback or a custom connector inside the connect option, is silently discarded before it reaches the TLS layer. As a result a peer whose certificate the application's custom checkServerIdentity was written to reject, but which still passes Node's default hostname and chain checks, is accepted when reached through BalancedPool. The Client, Pool, and Agent dispatchers are not affected because they extract the connect and tls options before cloning. This affects undici versions from 7.24.1 up to 7.29.1 and from 8.0.0 up to 8.10.2, and only when the application supplies a function-valued connect or tls option to BalancedPool. Users should upgrade to undici 7.29.1 or 8.10.2. |
| In Siglet current and past versions the refresh token handler do not enforce proof of possession of the issuer DID. |
| Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked. |
| When verifying a certificate chain which contains a certificate containing multiple email address constraints which share common local portions but different domain portions, these constraints will not be properly applied, and only the last constraint will be considered. |
| With the wolfSSL backend, when CA caching is enabled and an
`CURLOPT_SSL_CTX_FUNCTION` callback replaces the trust store, libcurl can
silently reinstall the cached store after the callback returns. A certificate
trusted by the cached store but rejected by the callback-selected store is
then incorrectly accepted. |
| A flaw in libcurl makes it wrongly reuse an existing HTTPS connection setup
for a given hostname even when using a different Native CA Store setting
(`CURLSSLOPT_NATIVE_CA`) than when the connection was created. |
| When `CURLOPT_PINNEDPUBLICKEY` is configured alongside options that disable
standard peer verification (`CURLOPT_SSL_VERIFYPEER = 0` and
`CURLOPT_SSL_VERIFYHOST = 0`), libcurl fails to enforce public key pinning on
connections established without a presented server certificate. Bypassing the
pinning check under these disabled-verification conditions allows
unauthenticated connections to succeed when they should be rejected. |
| When a libcurl-based application performs transfers via `SCP://` or `SFTP://`
and utilizes the `CURLOPT_SSH_KEYFUNCTION` callback, it may silently accept an
untrusted server. This vulnerability occurs when a server presents a host key
type that does not match the specific key type already recorded for that host
in the `known_hosts` file. Instead of rejecting the mismatch, the callback
mechanism fails to properly enforce the restriction, allowing the connection
to succeed without warning and risking a potential man-in-the-middle attack. |
| In this scenario, libcurl first uses a proper HTTP/3 server for the initial
transfers, and when it makes a second transfer to the same site it has been
replaced by the attacker's impostor machine - without a valid certificate.
When libcurl returns to the hostname the second time with a cached SSL session
(`CURLOPT_SSL_SESSIONID_CACHE` is not disabled) and early data enabled (the
`CURLSSLOPT_EARLYDATA` bit is set in `CURLOPT_SSL_OPTIONS`), libcurl might
send off the second request's bytes on that new connection *before* enforcing
the certificate verification failure. Potentially leaking sensitive
information. |
| When a user invokes curl using a schemeless URL combined with
`--proto-default` sftp (or scp), a disconnect occurs between the tool layer
and libcurl. The tool layer incorrectly infers the URL scheme, which
erroneously bypasses the initialization of critical SSH security options like
CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, the
libcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishes
the connection via SFTP/SCP as specified. Because the tool layer skipped the
security configuration, these SSH host verification options are silently
omitted, causing curl to connect to an unverified SSH remote host without
throwing an error. |
| Successfully using libcurl to do a transfer to a specific HTTP origin
(`hostA`) with **Digest** authentication and then changing the origin to a
different one (`hostB`) for a second transfer, reusing the same handle, makes
libcurl wrongly pass on the `Authorization:` header field meant for `hostA`,
to `hostB`. |
| When doing TLS related transfers with reused easy or multi handles and
altering the `CURLSSLOPT_NO_PARTIALCHAIN` option, libcurl could accidentally
reuse a CA store cached in memory for which the partial chain option was
reversed. Contrary to the user's wishes and expectations. This could make
libcurl find and accept a trust chain that it otherwise would not. |
| When using `CURLOPT_PINNEDPUBLICKEY` option with libcurl or `--pinnedpubkey`
with the curl tool, curl should check the public key of the server certificate
to verify the peer.
This check was skipped in a certain condition that would then make curl allow
the connection without performing the proper check, thus not noticing a
possible impostor. To skip this check, the connection had to be done with QUIC
with ngtcp2 built to use GnuTLS and the user had to explicitly disable the
standard certificate verification. |
| Authentication bypass by spoofing vulnerability in Apache Syncope.
When the configured JWKS settings for internal JWT authentication are disclosed (at least protocol and key), an attacker can spoof another user's privileges after completing a successful authentication and obtaining a valid JWT.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.7, from 4.1.0-M0 through 4.1.2.
Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue. |
| An improper validation vulnerability exists within PingAM where a well-crafted request allows arbitrary or protected ID Token claims to be set or overridden. In certain configurations this could allow an attacker to bypass authentication controls via spoofing leading to privilege escalation or impersonation. |
