| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Bookly WordPress plugin before 28.3 does not properly verify a customer's identity before updating their stored details, allowing unauthenticated attackers who know a customer's primary identifier to overwrite that customer's stored personal information such as name, email and address. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid unneeded actions on subflow reset
Once in a blue moon, the mptcp receive path can recursively call
mptcp_data_ready() via state change under unlucky error conditions, and
then try to hold the data lock again.
Break the recursion loop explicitly checking for the exceptional
condition.
Add a new flag instead of using an existing one like 'closing', to exit
early in subflow_state_change(), and explicitly flush the RX queue at
reset time.
This avoids unneeded processing to check for available data -- calling
get_mapping_status() and more on a dying subflow -- but also in error
reporting and worker scheduling.
Note that we must consume the currently peeked skb before invoking
mptcp_dss_corruption to avoid consuming it again after the eventual
reset has freed it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix under-reservation of blocks when repairing sf directories
Whilst running QA on XFS for-next as of 7.3-rc2 with MKFS_OPTIONS="-n
size=8192", I observed the following (trimmed) dmesg splat:
XFS: Assertion failed: args->total >= dp->i_nblocks - nblks, file: fs/xfs/libxfs/xfs_da_btree.c, line: 2387
WARNING: fs/xfs/xfs_message.c:104 at assfail+0x46/0x4a [xfs], CPU#0: xfs_scrub/1426511
CPU: 0 UID: 0 PID: 1426511 Comm: xfs_scrub Tainted: G W 7.3.0-rc2-djwx #rc2 PREEMPT(lazy) 6e418570b606a39783b0e7e7b30dc407b965f9e8
Tainted: [W]=WARN
RIP: 0010:assfail+0x46/0x4a [xfs]
RSP: 0018:ffffc900010d7890 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffd1
RDX: 0000000000000000 RSI: 0000000000000021 RDI: ffffffffa059fd38
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000a R11: 000000007fffffff R12: ffffc900010d7940
R13: ffff888368d8f980 R14: ffffc900010d7a48 R15: ffffc900010d78d0
FS: 00007f445c5ce680(0000) GS:ffff8884a97ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f443803b9a8 CR3: 0000000107a4b000 CR4: 00000000003506f0
Call Trace:
<TASK>
xfs_da_grow_inode_int+0x2e0/0x300 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_dir2_grow_inode+0x6e/0x150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_dir2_sf_to_block+0x149/0x870 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_swap_prep+0xe2/0x110 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_swap+0xfb/0x2f0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_rebuild_tree+0x99/0x100 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_directory+0x83/0x1c0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_attempt+0x4f/0x1e0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_scrub_metadata+0x393/0x5b0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_ioc_scrubv_metadata+0x306/0x570 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_file_ioctl+0xa4f/0x1150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x7a/0x3b0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
This is a consequence of commit 0fe77e57588b98, which added the
following assertion to xfs_da_grow_inode_int:
ASSERT(args->total >= dp->i_nblocks - nblks);
Tracing this back to xrep_dir_swap_prep, I noticed that the xfs_da_args
object that's passed to xfs_dir2_sf_to_block sets args->total to 1.
This is incorrect because mkfs set the directory block size to 8k and
the filesystem block size to 4k. In other words, args->total should be
2 here, not 1.
Dave Chinner tripped over the same problem with the same branch through
a different channel -- his test setup set the fs block size to 1k, in
which case the directory block size is still set to 4k. Here,
args->total should be 4.
Changing the assignment of args->total to sc->mp->m_dir_geo->fsbcount
makes the assertion go away, but that isn't a complete fix. In
xrep_tempexch_estimate, we also incorrectly assume that a shortform
conversion requires 1 fsblock when it should be m_dir_geo->fsbcount.
Without that, we can under-reserve space in the transaction and cause a
filesystem shutdown.
Note that the xfs_dabuf_nfsb helper will compute the correct value for
directories and xattr, so we use that instead of open-coding the logic.
Also fix xrep_xattr_swap_prep to assign args->total via xfs_dabuf_nfsb
to avoid one logic bomb if we ever support multi-fsblock attrs.
Tripped-by: 0fe77e57588b98 ("xfs: assert the reservation covers each da fork growth") |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.8, Notepad++ incompletely enforces shortcuts.xml HMAC validation because WM_MACRODLGRUNMACRO, the Run a Macro Multiple Times entry point, calls macroPlayback() without the validation used by command(). A tampered shortcuts.xml macro that is blocked through the Macro menu or a shortcut key can therefore execute through the multi-run dialog and invoke internal Notepad++ commands, including commands that launch external programs, in the current user context. This issue is fixed in version 8.9.8. |
| Apache Airflow HashiCorp provider: the HashiCorp Vault secrets backend's team-scope guard can be bypassed with a user-controlled key. In a multi-team deployment, a Dag author scoped to one team can supply a Variable key containing a path separator that causes the backend to resolve a secret belonging to a different team, because after the team-scoped lookup misses the backend falls back to a team-agnostic path concatenated from the unvalidated key. The Execution API Variables route accepts a path-shaped key, so this is reachable from ordinary Dag code.
Affects multi-team deployments using the HashiCorp Vault secrets backend. Single-team deployments are not affected, as there is no cross-team boundary to cross. This is the same class as CVE-2026-86465, CVE-2026-68870, CVE-2026-68871 and CVE-2026-68872 in the Akeyless, Azure Key Vault, Yandex Lockbox and Amazon secrets backends.
Users of apache-airflow-providers-hashicorp are recommended to upgrade to version 4.8.0 or later, which fixes the issue. |
| js-toml is a TOML parser for JavaScript. Prior to 1.1.3, load() does not bound nesting or dotted-key depth in the recursive parser at src/load/parser.ts or the interpreter at src/load/interpreter.ts, so deeply nested arrays, deeply nested inline tables, or long dotted keys can exhaust the V8 call stack and throw a raw RangeError instead of the documented SyntaxParseError. Applications that parse attacker-controlled TOML and handle only SyntaxParseError can rethrow the unexpected exception, which can terminate a worker or process and cause denial of service. The exception is synchronous and catchable by consumers that handle all exceptions, and the issue does not affect confidentiality or integrity. This issue is fixed in version 1.1.3. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix cifsFileInfo reference leak in deferred close
When cifs_close() defers a close, it hands the cifsFileInfo reference
of the closing struct file to the queued work. Each execution of
smb2_deferred_work_close() drops one such reference.
deferred_close_scheduled can be false while the work is pending: the
workqueue clears PENDING when the callback starts to run, before the
callback clears the flag under deferred_lock. A close in that
interval requeues the running work, and the callback then clears the
flag, leaving the requeued work pending with the flag down. A later
cifs_open() can reuse the handle and its cifs_close() reaches the
same branch: queue_delayed_work() fails because the work is still
pending, but cifs_close() returns without dropping the closing file's
reference. The cifsFileInfo count stays pinned and its tlink, dentry
and server handle are leaked.
Check the return value and hand off the reference only when work was
actually queued. Otherwise, use the shared _cifsFileInfo_put(), like
the mod_delayed_work() branch above: the pending execution already
owns its reference.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
If __subflow_push_pending() errors out we should avoid updating the
copied byte counters, to avoid mismatch push call later on. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Allocate split page tables as kernel page tables
A PTE is allocated directly without going through the standard page table
allocation routines (such as pte_alloc_one_kernel()) when the CPA code
splits a large page (__split_large_page()).
This means the page table constructor is never called nor is the page table
marked as a kernel page table.
The former results in the folio associated with the page table not being
marked as a page table (__pagetable_ctor() is never called thus neither is
__folio_set_pgtable()) nor are statistics updated to reflect
it (lruvec_stat_add_folio() is never called).
The latter issue of failing to mark the page table as a kernel page
table (ptdesc_set_kernel() is never called) is far more problematic.
Since commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
kernel page table freeing has been batched and since the
subsequent commit:
e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
IOTLB cache entries for kernel page tables have been invalidated upon
being freed.
Since split page tables are freed without this invalidation, the IOTLB
can contain stale entries for them.
Resolve the issue by using the ordinary PTE allocation API at split time.
This results in these kernel page tables invoking a page table constructor,
and thus requires a page table destructor.
Destructors are not always present, like for early allocated direct map
page tables). Conditionally call pagetable_dtor_free() if the PG_table
folio flag for the ptdesc is set, otherwise we free the page table via
pagetable_free().
Regardless of which path is taken page tables marked as kernel page tables,
which now includes split page tables, take the correct route through
pagetable_free_kernel().
There is a user-visible side effect in that split page tables will appear
in nr_page_table_pages in /proc/vmstat (as do other kernel page tables
allocated after early boot), however this is a positive change.
This issue started being markedly problematic after commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
so choose this as the Fixes target.
[ dhansen: rephrase in imperative mood ] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN
When exchanging two full-file ranges, xmi_can_exchange_reflink_flags()
can move the reflink inode flag from the file that currently has it to
the other file, as long as exactly one side is marked. This assumes
that the file contents, and therefore all shared extents, are exchanged.
That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set.
xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings
from file1, so an exchange can complete without moving every mapping
that the earlier flag-swap decision accounted for. In that case the
post-operation cleanup can clear the reflink flag from an inode that
still owns shared written extents. Later writes then take the
non-reflink write path and may update blocks that should still have
been protected by CoW, which shows up as data corruption between
reflink-related files.
Fix this by disabling the reflink flag exchange whenever
XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still
proceed; the conservative outcome is that both inodes keep the reflink
flag. The regular reflink flag cleanup path can drop the extra flag
later once the inode no longer has shared extents. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix unit conversions in per_binval computation
LOLLM noticed that we're doing the unit conversion in the per_binval
computation backwards -- xfs_buf_inval_log_space's second parameter is
supposed to be in bytes, but max_binval is in units of fsblocks. Hence
the conversion should be FSB -> B, not the other way around. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Prevent queue stop with deferred completions
When the driver receives a burst of packets, it can mark a BD with the
NO_CMPL bit to defer completions. The expectation is that the last
packet in the ring will have this bit unset and the completion generated
by that packet will cleanup that packet and the ones preceding it. This
helps to reduce the number of completions fired.
The suppressed completions are controlled by the driver and the number
of packets with suppressed completions scales with the size of the ring.
SW USO packets, on the other hand, have an upper bound on the maximum
number of BDs which can be consumed which does not scale with the ring
size.
So, for small rings it is possible that: a burst of packets is handed to
the driver, the driver defers completions for all of the packets because
the number of free descriptors stays above the threshold in the driver.
Then, a USO packet arrives, but the number of BDs available is not
enough and the USO code exits early.
In this case, you end up in a state where the ring is full of packets
with their completions suppressed, which can cause the queue to stop and
never be restarted.
Assuming default CONFIG_MAX_SKB_FRAGS, this is only possible for small
rings (<= 457 descriptors, below the driver default value) when
a burst of packets fills the ring, followed by a large USO packet that
can't fit. For larger rings, the delta between the completion
suppression threshold and the BDs required for SW USO is large enough
that completions will fire and this case is unreachable.
This issue was pointed out by Sashiko and while it seems fairly unlikely
given that the queue size must be small to trigger this, it is indeed
possible.
Fix this by tracking the last BD which deferred completions and
centralizing the logic for deciding when to ring the doorbell. The NO_CMPL
bit is now cleared in bnxt_txr_db_kick(), so every doorbell site is
covered, including the SW USO early exit. This guarantees the ring always
ends in a BD which generates a completion to clean it and wake the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: bail out on bitmap errors in xrep_agfl_fill
LOLLM also points out that the xagb_bitmap_set call in xrep_agfl_fill
can fail, but we don't check the result of xagb_bitmap_walk, so we
silently drop the error and proceed with inconsistent incore data.
That shouldn't be allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters
When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect
descriptor, the unwind path destroys RDMA contexts but leaves stale
n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later
sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending()
can then subtract the wrong number of send queue credits.
Reset the counters and clear rw_ctxs after freeing the heap
allocation before returning an error. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: initialise error in xfs_defer_finish_one()
xfs_defer_finish_one() declares error without an initialiser and only
assigns it inside the loop over dfp->dfp_work. When that list is empty
the loop body never runs, control falls through to the "Done with the
dfp, free it" path, and the function returns an indeterminate value.
An item-less pending item reaches this through xfs_defer_add_barrier(),
which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel.
xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a
non-zero stack value turns a successful barrier into a
SHUTDOWN_CORRUPT_INCORE in the middle of a repair. Zero is the correct
result: reaching the free path means the item loop drained without a
non-zero error. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
When the administrator mounts with forceuid or forcegid (uid=/gid=
mount options), they expect all files to appear owned by the specified
user/group. However, several code paths unconditionally called
sid_to_id() to overwrite cf_uid/cf_gid with server-provided values,
ignoring the administrator's explicit override:
- smb311_posix_info_to_fattr() (stat via POSIX extensions)
- cifs_posix_to_fattr() (readdir via POSIX extensions)
- parse_sec_desc() (CIFS ACL ownership mapping)
This allowed an untrusted server to dictate local file ownership even
when the mount was configured to force specific uid/gid values.
Fix all three call sites to check CIFS_MOUNT_OVERR_UID and
CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the
same pattern already used by cifs_unix_basic_to_fattr() for unix
extensions. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate TPA buffer allocation failures in bnxt_queue_mem_alloc()
bnxt_alloc_one_tpa_info_data() returns -ENOMEM as soon as one allocation
fails. This leaves the remaining rxr->rx_tpa[] entries zeroed.
bnxt_queue_mem_alloc() discards that return value, so the partially
initialized ring is installed by bnxt_queue_start().
Since the agg_id is picked by the hardware and bnxt_alloc_agg_idx maps
it to a SW index in rxr->rx_tpa[], it is possible that an uninitialized
slot can be chosen which would hand a zero DMA address to the device.
Fix this by checking the return value of bnxt_alloc_one_tpa_info_data
and unwinding, freeing the ring buffers. |
| BusyBox httpd IP deny rules with invalid CIDR prefix lengths fail open, leaving a parsed IP with a zeroed mask so the rule matches no clients. |
