| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for delete-on-close
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for ADS I/O
Alternate data streams are stored as xattrs. Unlike regular file I/O,
their read and write paths therefore call VFS xattr helpers which recheck
inode permissions and LSM policy using the current task credentials.
Run ADS I/O with the credentials captured when the SMB handle was opened. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate NTLMv2 response before updating session key
ksmbd_auth_ntlmv2() derives the NTLMv2 session key into
sess->sess_key before it verifies the NTLMv2 response.
ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even
when ksmbd_auth_ntlmv2() failed.
With SMB3 multichannel binding, the failed authentication operates on
an existing session and the session setup error path does not expire
binding sessions. A client can send a binding session setup with a
bad NT proof and KEY_XCH and still modify sess->sess_key before
STATUS_LOGON_FAILURE is returned.
Relevant path:
smb2_sess_setup()
-> conn->binding = true
-> ntlm_authenticate()
-> session_user()
-> ksmbd_decode_ntlmssp_auth_blob()
-> ksmbd_auth_ntlmv2()
-> calc_ntlmv2_hash()
-> hmac_md5_usingrawkey(..., sess->sess_key)
-> crypto_memneq() returns mismatch
-> KEY_XCH arc4_crypt(..., sess->sess_key, ...)
-> out_err without expiring the binding session
Derive the base session key into a local buffer and copy it to
sess->sess_key only after the proof matches. Return immediately on
authentication failure so KEY_XCH is only processed after successful
authentication. |
|
In Reactor Netty HTTP Server, versions 1.1.x prior to 1.1.13 and versions 1.0.x prior to 1.0.39, it is possible for a user to provide specially crafted HTTP requests that may cause a denial-of-service (DoS) condition.
Specifically, an application is vulnerable if Reactor Netty HTTP Server built-in integration with Micrometer is enabled.
|
| Reactor Netty HTTP Server, in versions 1.0.11 - 1.0.23, may log request headers in some cases of invalid HTTP requests. The logged headers may reveal valid access tokens to those with access to server logs. This may affect only invalid HTTP requests where logging at WARN level is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchmaps reservation limit check
xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt
overhead to a local resblks variable, but the final UINT_MAX
check still tests req->resblks. That is the reservation value
from before the overhead was added.
The computed value is stored back in req->resblks and later passed
to xfs_trans_alloc(), whose block reservation argument is unsigned
int. Check the computed reservation so the existing limit applies
to the value that will be used. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers
Syzbot reported a hung task in nilfs_transaction_begin() where multiple
tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds
waiting to acquire ns_segctor_sem for read:
INFO: task syz.0.17:5918 blocked for more than 143 seconds.
Call Trace:
schedule+0x164/0x360
rwsem_down_read_slowpath+0x6d9/0x940
down_read+0x99/0x2e0
nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221
nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921
notify_change+0xc1a/0xf40
chmod_common+0x273/0x4a0
do_fchmodat+0x12d/0x230
The writer holding ns_segctor_sem was a concurrent
NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting
per-element warnings from nilfs_sufile_updatev():
__nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78
nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186
nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline]
nilfs_free_segments fs/nilfs2/segment.c:1140 [inline]
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline]
nilfs_segctor_do_construct+0x1f55/0x76c0
nilfs_clean_segments+0x3bd/0xa50
nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline]
nilfs_ioctl+0x261f/0x2780
The root cause is that user-supplied segment numbers are not validated
before nilfs_clean_segments() begins doing work; the range check on
each segnum is performed deep inside the call chain by
nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry
while still holding the segctor lock and the sufile mi_sem. Under load
(repeated invocations across multiple mounts saturating the global
printk path), the cumulative printk latency keeps ns_segctor_sem held
long enough to trip the hung_task watchdog, blocking concurrent
operations such as chmod() that need ns_segctor_sem for read.
Fix by validating the contents of kbufs[4] in nilfs_clean_segments()
immediately after acquiring ns_segctor_sem via nilfs_transaction_lock().
Holding ns_segctor_sem serializes the check against
nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation
uses a consistent value. Out-of-range segment numbers are rejected
with -EINVAL before any segment-cleaning work begins, so the bad
entries never reach the per-element diagnostic path inside
nilfs_sufile_updatev(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY
commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a
permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to
fsctl_set_sparse and noted that "similar handle-level checks exist in other
functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of
the missing ones, and the most security-relevant: smb2_set_info_sec() calls
set_info_sec() with no per-handle access check.
set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it
rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via
set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and
rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr().
Every other persistent-mutation arm of the sibling handler
smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA /
FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm —
which mutates the access control itself — is the only one with no gate.
A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no
FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType
SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself
access the handle's daccess never carried. Unlike the FSCTL data arms this
is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop —
the missing fp->daccess check is the entire gate.
Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so
require at least one of those on the handle before re-permissioning the
file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
Reading the debugfs "count" file of a memcg-aware shrinker can sleep
inside an RCU read-side critical section:
BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421
RCU nest depth: 1, expected: 0
css_rstat_flush
mem_cgroup_flush_stats
zswap_shrinker_count
shrinker_debugfs_count_show
shrinker_debugfs_count_show() invokes the ->count_objects() callback under
rcu_read_lock(). The zswap callback flushes memcg stats via
css_rstat_flush(), which may sleep, so it must not run under RCU.
The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally
and returns a memcg holding a css reference (dropped on the next iteration
or by mem_cgroup_iter_break()), so the memcg stays alive without it. The
shrinker is kept alive by the open debugfs file: shrinker_free() removes
the debugfs entries via debugfs_remove_recursive(), which waits for
in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb).
The sibling "scan" handler already invokes the sleeping ->scan_objects()
callback with no RCU section.
Drop the rcu_read_lock()/rcu_read_unlock(). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sch: use raw_spinlock_t in the irq startup path
sch_irq_unmask() enables the GPIO IRQ and then updates the controller
state through sch_irq_mask_unmask(), which takes sch->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and
used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported:
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the SCH controller lock to raw_spinlock_t. The same lock is
also used by the GPIO direction and value callbacks, but those critical
sections only update MMIO-backed GPIO registers and do not contain
sleepable operations. Keeping this register lock non-sleeping is
therefore appropriate for the irqchip callbacks and does not change the
GPIO-side locking contract. |
| In the Linux kernel, the following vulnerability has been resolved:
block: skip sync_blockdev() on surprise removal in bdev_mark_dead()
bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no ->mark_dead op)
lost its !surprise guard when the holder ->mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.
syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -> blk_mark_disk_dead() ->
bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.
Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.
Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate BTF repeated field counts before expansion
btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD,
and btf_repeat_fields() expands repeatable fields from array elements
into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields().
The remaining-capacity check performs the expanded field count calculation
in u32. A malformed BTF can wrap that calculation, causing the check to
pass even when the expanded field count exceeds the scratch array
capacity. The following memcpy() can then write past the end of the
array.
Use checked addition and multiplication before copying repeated fields
and reject impossible counts. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require source read access for duplicate extents
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with
KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle
zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to
(6/6; a FILE_READ_DATA-only handle was correctly denied).
This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL
permission bypass by adding a permission check for FSCTL_SET_SPARSE").
Because SET_ZERO_DATA writes data (not an attribute), require
FILE_WRITE_DATA. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the
destination file's data via vfs_clone_file_range() with neither the
share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle
fp->daccess check that the other write-bearing arms carry. A client can
overwrite destination data on a read-only share, or from a handle opened
with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).
FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via
the clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix;
require FILE_WRITE_DATA since this writes data. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent path traversal bypass by restricting caseless retry
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately. |
