| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The YoSmart YoLink MQTT broker through 2025-10-02 does not enforce sufficient authorization controls to prevent cross-account attacks, allowing an attacker to remotely operate affected devices if the attacker obtains the associated device IDs. Because YoLink device IDs are predictable, an attacker can exploit this to gain full control over any other YoLink user's devices. |
| The use of a broken or risky cryptographic algorithm was discovered in firmware version 3.60 of the Click Plus PLC. The vulnerability relies on the fact that the software uses an insecure implementation of the RSA encryption algorithm. |
| A vulnerability, which was classified as critical, has been found in Zend.To up to 6.10-6 Beta. This issue affects the function exec of the file NSSDropoff.php. The manipulation of the argument file_1 leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 6.10-7 is able to address this issue. It is recommended to upgrade the affected component. This affects a rather old version of the software. The vendor recommends updating to the latest release. Additional countermeasures have been added in 6.15-8. |
| quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in designervily Xcare xcare allows PHP Local File Inclusion.This issue affects Xcare: from n/a through < 6.5. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in purethemes WorkScout-Core workscout-core allows Reflected XSS.This issue affects WorkScout-Core: from n/a through < 1.7.06. |
| Incorrect Privilege Assignment vulnerability in GoodLayers Goodlayers Core goodlayers-core allows Privilege Escalation.This issue affects Goodlayers Core: from n/a through < 2.1.7. |
| Insertion of Sensitive Information Into Sent Data vulnerability in wpdesk ShopMagic shopmagic-for-woocommerce allows Retrieve Embedded Sensitive Data.This issue affects ShopMagic: from n/a through <= 4.5.6. |
| Insertion of Sensitive Information Into Sent Data vulnerability in PressTigers Simple Job Board simple-job-board allows Retrieve Embedded Sensitive Data.This issue affects Simple Job Board: from n/a through <= 2.13.7. |
| The Postbox's configuration on macOS, specifically the presence of entitlements: "com.apple.security.cs.allow-dyld-environment-variables" and "com.apple.security.cs.disable-library-validation" allows for Dynamic Library (Dylib) injection. A local attacker with unprivileged access can use environment variables like DYLD_INSERT_LIBRARIES to successfully inject code in application's context and bypass Transparency, Consent, and Control (TCC). Acquired resource access is limited to previously granted permissions by the user. Access to other resources beyond granted-permissions requires user interaction with a system prompt asking for permission.
The original company behind Postbox is no longer operational, the software will no longer receive updates. The acquiring company (em Client) did not cooperate in vulnerability disclosure. |
| Multiple versions of Central Monitor CNS-6201 contain a NULL pointer dereference vulnerability. When processing a crafted certain UDP packet, the affected device may abnormally terminate. |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
| A relative path traversal vulnerability was discovered in Productivity Suite software version 4.4.1.19. The vulnerability allows an unauthenticated remote attacker to interact with the ProductivityService PLC simulator and create arbitrary directories on the target machine. |
| General Industrial Controls Lynx+ Gateway is missing critical authentication in the embedded web server which
could allow an attacker to send GET requests to obtain sensitive device
information. |
| This vulnerability allows malicious actors to gain unauthorized access to the Zenitel ICX500 and ICX510 Gateway Billing Admin endpoint, enabling them to read the entire contents of the Billing Admin database. |
