| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Confidential Containers's Trustee project contains tools and components for attesting confidential guests and providing secrets to them. In versions prior to 0.15.0, the attestation-policy endpoint didn't check if the kbs-client submitting the request was actually authenticated (had the right key). This allowed any kbs-client to actually change the attestation policy. Version 0.15.0 fixes the issue. |
| Python Social Auth is a social authentication/registration mechanism. In versions prior to 5.6.0, upon authentication, the user could be associated by e-mail even if the `associate_by_email` pipeline was not included. This could lead to account compromise when a third-party authentication service does not validate provided e-mail addresses or doesn't require unique e-mail addresses. Version 5.6.0 contains a patch. As a workaround, review the authentication service policy on e-mail addresses; many will not allow exploiting this vulnerability. |
| Quadient DS-700 iQ devices through 2025-09-30 might have a race condition during the quick clicking of (in order) the Question Mark button, the Help Button, the About button, and the Help Button, leading to a transition out of kiosk mode into local administrative access. NOTE: the reporter indicates that the "behavior was observed sporadically" during "limited time on the client site," making it not "possible to gain more information about the specific kiosk mode crashing issue," and the only conclusion was "there appears to be some form of race condition." Accordingly, there can be doubt that a reproducible cybersecurity vulnerability was identified; sporadic software crashes can also be caused by a hardware fault on a single device (for example, transient RAM errors). The reporter also describes a variety of other issues, including initial access via USB because of the absence of a "lock-pick resistant locking solution for the External Controller PC cabinet," which is not a cybersecurity vulnerability (section 4.1.5 of the CNA Operational Rules). Finally, it is unclear whether the device or OS configuration was inappropriate, given that the risks are typically limited to insider threats within the mail operations room of a large company. |
| The StrongDM Client insufficiently protected a pre-authentication token. Attackers could exploit this to intercept and reuse the token, potentially redeeming valid authentication credentials through a race condition. |
| The StrongDM Windows service incorrectly handled input validation. Authenticated attackers could potentially exploit this leading to privilege escalation. |
| The StrongDM Windows service incorrectly handled communication related to system certificate management. Attackers could exploit this behavior to install untrusted root certificates or remove trusted ones. |
| The StrongDM macOS client incorrectly processed JSON-formatted messages. Attackers could potentially modify macOS system configuration by crafting a malicious JSON message. |
| Cross-site scripting vulnerability exists in GROWI prior to v7.2.10. If a malicious user creates a page containing crafted contents, an arbitrary script may be executed on the web browser of a victim user who accesses the page. |
| Multiple NAS management applications provided by I-O DATA DEVICE, INC. register Windows services with unquoted file paths. A user with the write permission on the root directory of the system drive may execute arbitrary code with SYSTEM privilege. |
| The bSecure plugin for WordPress is vulnerable to Privilege Escalation due to missing authorization within its order_info REST endpoint in versions 1.3.7 through 1.7.9. The plugin registers the /webhook/v2/order_info/ route with a permission_callback that always returns true, effectively bypassing all authentication. This makes it possible for unauthenticated attackers who know any user’s email to obtain a valid login cookie and fully impersonate that account. |
| NAS Navigator2 Windows version by BUFFALO INC. registers a Windows service with an unquoted file path. A user with the write permission on the root directory of the system drive may execute arbitrary code with SYSTEM privilege. |
| Insecure Direct Object Reference (IDOR) in /tenants/{id} API endpoint in Inforcer Platform version 2.0.153 allows an authenticated user with low privileges to enumerate and access tenant information belonging to other clients via modification of the tenant ID in the request URL. |
| On affected platforms running Arista EOS, maliciously formed UDP packets with source port 3503 may be accepted by EOS. UDP Port 3503 is associated with LspPing Echo Reply. This can result in unexpected behaviors, especially for UDP based services that do not perform some form of authentication. |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A BPv7 bundle with a malformed extension block causes uncontrolled memory allocation inside ION-DTN 4.1.3s, leading to receiver thread termination and a Denial-of-Service (DoS). The triggering bundle contains an extension block starting at `0x85070201005bbb0e20b4ea001a000927c0...`. The first byte in the extension block (0x85) indicates a CBOR array of five elements of which the first four are numbers (0x07, 0x02, 0x01, 0x00) but the fifth element is a byte string of length 27 (`0x5bbb0e20b4ea001a000927c0...`). The vulnerability seems to be due to processing the fifth element of the array (i.e., the byte string) as replacing it with a number makes the vulnerability no longer be triggered. While parsing this extension block, ION obtains a very large block length, which in the code in `bei.c`:764) seems to be passed from `blockLength` which is an unsigned int, to a 32 bit signed integer `blkSize`. The unsigned to signed conversion causes `blkSize` to hold the value of -369092043, which is then converted into a 64-bit unsigned value inside `MTAKE(blkSize)`, resulting in an attempt to allocate an unrealistic amount of memory, causing the error. As of time of publication, no known patched versions of BPv7 exist. |
| Allstar is a GitHub App to set and enforce security policies. In versions prior to 4.5, a vulnerability in Allstar’s Reviewbot component caused inbound webhook requests to be validated against a hard-coded, shared secret. The value used for the secret token was compiled into the Allstar binary and could not be configured at runtime. In practice, this meant that every deployment using Reviewbot would validate requests with the same secret unless the operator modified source code and rebuilt the component - an expectation that is not documented and is easy to miss. All Allstar releases prior to v4.5 that include the Reviewbot code path are affected. Deployments on v4.5 and later are not affected. Those who have not enabled or exposed the Reviewbot endpoint are not exposed to this issue. |
| Better Auth is an authentication and authorization library for TypeScript. In versions prior to 1.3.26, unauthenticated attackers can create or modify API keys for any user by passing that user's id in the request body to the `api/auth/api-key/create` route. `session?.user ?? (authRequired ? null : { id: ctx.body.userId })`. When no session exists but `userId` is present in the request body, `authRequired` becomes false and the user object is set to the attacker-controlled ID. Server-only field validation only executes when `authRequired` is true (lines 280-295), allowing attackers to set privileged fields. No additional authentication occurs before the database operation, so the malicious payload is accepted. The same pattern exists in the update endpoint. This is a critical authentication bypass enabling full an unauthenticated attacker can generate an API key for any user and immediately gain complete authenticated access. This allows the attacker to perform any action as the victim user using the api key, potentially compromise the user data and the application depending on the victim's privileges. Version 1.3.26 contains a patch for the issue. |
| A command injection vulnerability was discovered in the TrustyAI Explainability toolkit. Arbitrary commands placed in certain fields of a LMEValJob custom resource (CR) may be executed in the LMEvalJob pod's terminal. This issue can be exploited via a maliciously crafted LMEvalJob by a user with permissions to deploy a CR. |
| Pleasanter contains a stored cross-site scripting vulnerability in Body, Description and Comments, which allows an attacker to execute an arbitrary script in a logged-in user's web browser. |
| A binding to an unrestricted IP address vulnerability was discovered in Productivity Suite software version v4.4.1.19. The vulnerability allows an unauthenticated remote attacker to interact with the ProductivityService PLC simulator and read, write, or delete arbitrary files and folders on the target machine |
| A path traversal issue exists in WXR9300BE6P series firmware versions prior to Ver.1.10. Arbitrary file may be altered by an administrative user who logs in to the affected product. Moreover, arbitrary OS command may be executed via some file alteration. |
