| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Black Duck SCA versions prior to 2025.10.0 had user role permissions configured in an overly broad manner. Users with the scoped Project Manager user role with the Global User Read access permission enabled access to certain Project Administrator functionalities which should have be inaccessible. Exploitation does not grant full system control, but it may enable unauthorized changes to project configurations or access to system sensitive information. |
| The initial code parsing the manifest did not check the content of the file names yet later code assumed that it was checked and panicked when encountering illegal characters, resulting in a crash of Routinator. |
| The standard user uses the run as function to start the MEAC applications with administrative privileges. To ensure that the system can startup on its own, the credentials of the administrator were stored. Consequently, the EPC2 user can execute any command with administrative privileges. This allows a privilege escalation to the administrative level. |
| The Sparkle framework includes an XPC service Downloader.xpc, by default this service is private to the application its bundled with. A local unprivileged attacker can register this XPC service globally which will inherit TCC permissions of the application.
Lack of validation of connecting client allows the attacker to copy TCC-protected files to an arbitrary location. Access to other resources beyond granted-permissions requires user interaction with a system prompt asking for permission.
This issue was fixed in version 2.7.2 |
| The Sparkle framework includes a helper tool Autoupdate. Due to lack of authentication of connecting clients a local unprivileged attacker can request installation of crafted malicious PKG file by racing to connect to the daemon when other app spawns it as root. This results in local privilege escalation to root privileges. It is worth noting that it is possible to spawn Autopudate manually via Installer XPC service. However this requires the victim to enter credentials upon system authorization dialog creation that can be modified by the attacker.
This issue was fixed in version 2.7.2 |
| This vulnerability exist in PPC 2K15X Router, due to improper input validation for the Common Gateway Interface (CGI) parameters at its web management portal. A remote attacker could exploit this vulnerability by injecting malicious JavaScript into the vulnerable parameter, leading to a reflected Cross-Site Scripting (XSS) attack on the targeted system. |
| In Grafana, an excessively long dashboard title or panel name will cause Chromium browsers to become unresponsive due to Improper Input Validation vulnerability in Grafana.
This issue affects Grafana: before 11.6.2 and is fixed in 11.6.2 and higher. |
| The Zegen Core plugin for WordPress is vulnerable to Cross-Site Request Forgery to Arbitrary File Upload in versions up to, and including, 2.0.1. This is due to missing nonce validation and missing file type validation in the '/custom-font-code/custom-fonts-uploads.php' file. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Mstoreapp Mobile App WordPress plugin through 2.08 and Mstoreapp Mobile Multivendor through 9.0.1 do not properly verify users identify when using an AJAX action, allowing unauthenticated users to retrieve a valid session for arbitrary users by knowing their email address. |
| The Stock Tools plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'image_height' and 'image_width' shortcode attributes in all versions up to, and including, 1.1. This is due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The URL Image Importer plugin for WordPress is vulnerable to arbitrary file uploads due to insufficient file type validation in all versions up to, and including, 1.0.6. This is due to the plugin relying on a user-controlled Content-Type HTTP header to validate file uploads in the 'uimptr_import_image_from_url()' function which writes the file to the server before performing proper validation. This makes it possible for authenticated attackers, with Author-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible via the uploaded PHP file. |
| Bypass Connection Restriction vulnerability in Hitachi Infrastructure Analytics Advisor (Data Center Analytics component), Hitachi Ops Center Analyzer (Hitachi Ops Center Analyzer detail view component).This issue affects Hitachi Infrastructure Analytics Advisor:; Hitachi Ops Center Analyzer: from 10.0.0-00 before 11.0.4-00. |
| Improper resource release in the call termination process in AWS Wickr before version 6.62.13 on Windows, macOS and Linux may allow a call participant to continue receiving audio input from another user after they close their call window. This issue occurs under certain conditions, which require the affected user to take a particular action within the application
To mitigate this issue, users should upgrade AWS Wickr, Wickr Gov and Wickr Enterprise desktop version to version 6.62.13. |
| Some Hikvision Wireless Access Point are vulnerable to authenticated remote command execution due to insufficient input validation. Attackers with valid credentials can exploit this flaw by sending crafted packets containing malicious commands to affected devices, leading to arbitrary command execution. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int3472: Fix double free of GPIO device during unregister
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Implement settime64 with -EOPNOTSUPP
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Implement gettimex64 with -EOPNOTSUPP
gve implemented a ptp_clock for sole use of do_aux_work at this time.
ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has
implemented either gettimex64 or gettime64. Stub gettimex64 and return
-EOPNOTSUPP to prevent NULL dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN
p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq)
if list_empty(&m->req_list).
However, if the pipe is full, we need to read more data and this used to
work prior to commit aaec5a95d59615 ("pipe_read: don't wake up the writer
if the pipe is still full").
p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before
the commit above) triggered the unnecessary wakeup. This wakeup calls
p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux()
will notice EPOLLIN and schedule_work(&m->rq).
This no longer happens after the optimization above, change p9_fd_request()
to use p9_poll_mux() instead of only checking for EPOLLOUT. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bcsp: receive data only if registered
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH. |
| In the Linux kernel, the following vulnerability has been resolved:
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
There is race in amdgpu_amdkfd_device_fini_sw and interrupt.
if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and
kfree(kfd), and KGD interrupt generated.
kernel panic log:
BUG: kernel NULL pointer dereference, address: 0000000000000098
amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP
PGD d78c68067 P4D d78c68067
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
PUD 1465b8067 PMD @
Oops: @002 [#1] SMP NOPTI
kfd kfd: amdgpu: Total number of KFD nodes to be created: 4
CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K
RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40
Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc
89 c6 e8 07 38 5d
RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018
0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098
ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020
0000000000000000 R11: 0000000000000000 R12: 0900000000000002
ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00
CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0
0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu]
? amdgpu_fence_process+0xa4/0x150 [amdgpu]
kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace
amdgpu_irq_dispatch+0x165/0x210 [amdgpu]
amdgpu_ih_process+0x80/0x100 [amdgpu]
amdgpu: Virtual CRAT table created for GPU
amdgpu_irq_handler+0x1f/@x60 [amdgpu]
__handle_irq_event_percpu+0x3d/0x170
amdgpu: Topology: Add dGPU node [0x74a2:0x1002]
handle_irq_event+0x5a/@xcO
handle_edge_irq+0x93/0x240
kfd kfd: amdgpu: KFD node 1 partition @ size 49148M
asm_call_irq_on_stack+0xf/@x20
</IRQ>
common_interrupt+0xb3/0x130
asm_common_interrupt+0x1le/0x40
5.10.134-010.a1i5000.a18.x86_64 #1 |
