| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple versions of Central Monitor CNS-6201 contain a NULL pointer dereference vulnerability. When processing a crafted certain UDP packet, the affected device may abnormally terminate. |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
| A relative path traversal vulnerability was discovered in Productivity Suite software version 4.4.1.19. The vulnerability allows an unauthenticated remote attacker to interact with the ProductivityService PLC simulator and create arbitrary directories on the target machine. |
| General Industrial Controls Lynx+ Gateway is missing critical authentication in the embedded web server which
could allow an attacker to send GET requests to obtain sensitive device
information. |
| This vulnerability allows malicious actors to gain unauthorized access to the Zenitel ICX500 and ICX510 Gateway Billing Admin endpoint, enabling them to read the entire contents of the Billing Admin database. |
| Project Gardener implements the automated management and operation of Kubernetes clusters as a service. Code injection may be possible in Gardener Extensions for AWS providers prior to version 1.64.0, Azure providers prior to version 1.55.0, OpenStack providers prior to version 1.49.0, and GCP providers prior to version 1.46.0. This vulnerability could allow a user with administrative privileges for a Gardener project to obtain control over the seed cluster where the shoot cluster is managed. This affects all Gardener installations where Terraformer is used/can be enabled for infrastructure provisioning with any of the affected components. This issue has been patched in Gardener Extensions for AWS providers version 1.64.0, Azure providers version 1.55.0, OpenStack providers version 1.49.0, and GCP providers version 1.46.0. |
| The Meta Tag Manager WordPress plugin before 3.3 does not restrict which roles can create http-equiv refresh meta tags. |
| Deserialization of Untrusted Data vulnerability in Whitebox-Studio Scape scape allows Object Injection.This issue affects Scape: from n/a through <= 1.5.13. |
| LangBot is a global IM bot platform designed for LLMs. In versions 4.1.0 up to but not including 4.3.5, authorized attackers can exploit the /api/v1/files/documents interface to perform arbitrary file uploads. Since this interface does not strictly restrict the storage directory of files on the server, it is possible to upload dangerous files to specific system directories. This is fixed in version 4.3.5. |
| Improper authentication of library files in the Eaton IPP software installer could lead to arbitrary code execution of an attacker with the access to the software package.
This security issue has been fixed in the latest version of IPP which is available on the Eaton download center. |
| SonarQube Server and Cloud is a static analysis solution for continuous code quality and security inspection. A command injection vulnerability exists in SonarQube GitHub Action in version 4.0.0 to before version 6.0.0 when workflows pass user-controlled input to the args parameter on Windows runners without proper validation. This vulnerability bypasses a previous security fix and allows arbitrary command execution, potentially leading to exposure of sensitive environment variables and compromise of the runner environment. The vulnerability has been fixed in version 6.0.0. Users should upgrade to this version or later. |
| Apollo Studio Embeddable Explorer & Embeddable Sandbox are website embeddable software solutions from Apollo GraphQL. Prior to Apollo Sandbox version 2.7.2 and Apollo Explorer version 3.7.3, a cross-site request forgery (CSRF) vulnerability was identified. The vulnerability arises from missing origin validation in the client-side code that handles window.postMessage events. A malicious website can send forged messages to the embedding page, causing the victim’s browser to execute arbitrary GraphQL queries or mutations against their GraphQL server while authenticated with the victim’s cookies. This issue has been patched in Apollo Sandbox version 2.7.2 and Apollo Explorer version 3.7.3. |
| get-jwks contains fetch utils for JWKS keys. In versions prior to 11.0.2, a vulnerability in get-jwks can lead to cache poisoning in the JWKS key-fetching mechanism. When the iss (issuer) claim is validated only after keys are retrieved from the cache, it is possible for cached keys from an unexpected issuer to be reused, resulting in a bypass of issuer validation. This design flaw enables a potential attack where a malicious actor crafts a pair of JWTs, the first one ensuring that a chosen public key is fetched and stored in the shared JWKS cache, and the second one leveraging that cached key to pass signature validation for a targeted iss value. The vulnerability will work only if the iss validation is done after the use of get-jwks for keys retrieval. This issue has been patched in version 11.0.2. |
| mkdocs-include-markdown-plugin is an Mkdocs Markdown includer plugin. In versions 7.1.7 and below, there is a vulnerability where unvalidated input can collide with substitution placeholders. This issue is fixed in version 7.1.8. |
| Canon EOS Webcam Utility Pro for MAC OS version 2.3d
(2.3.29) and earlier contains an improper directory permissions vulnerability.
Exploitation of this vulnerability requires administrator access by a malicious
user. An attacker could modify the directory, potentially resulting in code
execution and ultimately leading to privilege escalation. |
