| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
When doing a relocation, there is a chance that at the time of
btrfs_reloc_clone_csums(), there is no checksum for the corresponding
region.
In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item
and so ordered_extent's logical is set to some invalid value. Then,
btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a
block group and will hit an assert or a null pointer dereference as
following.
This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16
times) with a null_blk setup. The device's zone size and capacity is set to
32 MB and the storage size is set to 5 GB on my setup.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00
> 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00
RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827
R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000
R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0
Call Trace:
<TASK>
? die_addr+0x3c/0xa0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs]
btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs]
? rcu_is_watching+0x11/0xb0
? lock_release+0x47a/0x620
? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs]
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs]
? __smp_call_single_queue+0x124/0x350
? rcu_is_watching+0x11/0xb0
btrfs_work_helper+0x19f/0xc60 [btrfs]
? __pfx_try_to_wake_up+0x10/0x10
? _raw_spin_unlock_irq+0x24/0x50
? rcu_is_watching+0x11/0xb0
process_one_work+0x8c1/0x1430
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0x52/0x60
worker_thread+0x100/0x12c0
? __kthread_parkme+0xc1/0x1f0
? __pfx_worker_thread+0x10/0x10
kthread+0x2ea/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
On the zoned mode, writing to pre-allocated region means data relocation
write. Such write always uses WRITE command so there is no need of splitting
and rewriting logical address. Thus, we can just skip the function for the
case. |
| Buffer overflow vulnerability in H3C FA3010L access points SWFA1B0V100R005 due to the lack of length verification, which is related to the setting of firewall rules. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands. |
| Buffer overflow vulnerability in Mercury MIPC552W Camera v1.0 due to the lack of length verification, which is related to the configuration of the PPTP server. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands. |
| Buffer overflow vulnerability in Digital China DCBC Gateway 200-2.1.1 due to the lack of length verification, which is related to the configuration of static NAT rules. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands. |
| A vulnerability in the TL1 function of Cisco Network Convergence System (NCS) 4000 Series could allow an authenticated, local attacker to cause a memory leak in the TL1 process.
This vulnerability is due to TL1 not freeing memory under some conditions. An attacker could exploit this vulnerability by connecting to the device and issuing TL1 commands after being authenticated. A successful exploit could allow the attacker to cause the TL1 process to consume large amounts of memory. When the memory reaches a threshold, the Resource Monitor (Resmon) process will begin to restart or shutdown the top five consumers of memory, resulting in a denial of service (DoS).Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see . |
| Vue Vben Admin 2.10.1 allows unauthorized login to the backend due to an issue with hardcoded credentials. |
| A vulnerability, which was classified as critical, has been found in Audi UTR Dashcam 2.0. Affected by this issue is some unknown functionality of the component Command API. The manipulation leads to improper access controls. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. Upgrading to version 2.89 and 2.90 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early about these issues and acted very professional. Version 2.89 is fixing this issue for new customers and 2.90 is going to fix it for existing customers. |
| Incorrect Access Control in Unifiedtransform 2.X leads to Privilege Escalation allowing teachers to create syllabus. |
| An attacker could modify or disable settings, disrupt fuel monitoring
and supply chain operations, leading to disabling of ATG monitoring.
This would result in potential safety hazards in fuel storage and
transportation. |
| The Vayu Blocks – Gutenberg Blocks for WordPress & WooCommerce plugin for WordPress is vulnerable to unauthorized access and modification of data due to missing capability checks on the 'vayu_blocks_get_toggle_switch_values_callback' and 'vayu_blocks_save_toggle_switch_callback' function in versions 1.0.4 to 1.2.1. This makes it possible for unauthenticated attackers to read plugin options and update any option with a key name ending in '_value'. |
| A vulnerability in the web-based management interface of Cisco BroadWorks Application Delivery Platform could allow an unauthenticated, remote attacker to conduct a cross-site scripting attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. |
| Bosscomm IF740 Firmware versions:11001.7078 & v11001.0000 and System versions: 6.25 & 6.00 were discovered to store passwords in cleartext. |
| Bosscomm IF740 Firmware versions:11001.7078 & v11001.0000 and System versions: 6.25 & 6.00 were discovered to send communications to the update API in plaintext, allowing attackers to access sensitive information via a man-in-the-middle attack. |
| An information disclosure vulnerability in Bosscomm IF740 Firmware versions:11001.7078 & v11001.0000 and System versions: 6.25 & 6.00 allows attackers to obtain hardcoded cleartext credentials via the update or boot process. |
| An issue in Motorola Mobility Droid Razr HD (Model XT926) System Version: 9.18.94.XT926.Verizon.en.US allows physically proximate unauthorized attackers to access USB debugging, leading to control of the host device itself. |
| Out-of-bounds array write in Xpdf 4.05 and earlier, due to incorrect integer overflow checking in the PostScript function interpreter code. |
| An unauthenticated remote attacker can bypass the user management in CODESYS Visualization and read visualization template files or static elements by means of forced browsing. |
| An issue in Coresmartcontracts Uniswap v.3.0 and fixed in v.4.0 allows a remote attacker to escalate privileges via the _modifyPosition function |
| An OS Command Injection vulnerability exists in the Infinxt iEdge 100 2.1.32 Troubleshoot module, specifically in the tracertVal parameter of the Tracert function. |
| A command injection vulnerability exists in the Infinxt iEdge 100 2.1.32 in the Troubleshoot module "MTR" functionality. The vulnerability is due to improper validation of user-supplied input in the mtrIp parameter. An attacker can exploit this flaw to execute arbitrary operating system commands on the underlying system with the same privileges as the web application process. |
