| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xen: privcmd: Fix possible access to a freed kirqfd instance
Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and
privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd
created and added to the irqfds_list by privcmd_irqfd_assign() may get
removed by another thread executing privcmd_irqfd_deassign(), while the
former is still using it after dropping the locks.
This can lead to a situation where an already freed kirqfd instance may
be accessed and cause kernel oops.
Use SRCU locking to prevent the same, as is done for the KVM
implementation for irqfds. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id()
mwifiex_get_priv_by_id() returns the priv pointer corresponding to
the bss_num and bss_type, but without checking if the priv is actually
currently in use.
Unused priv pointers do not have a wiphy attached to them which can
lead to NULL pointer dereferences further down the callstack. Fix
this by returning only used priv pointers which have priv->bss_mode
set to something else than NL80211_IFTYPE_UNSPECIFIED.
Said NULL pointer dereference happened when an Accesspoint was started
with wpa_supplicant -i mlan0 with this config:
network={
ssid="somessid"
mode=2
frequency=2412
key_mgmt=WPA-PSK WPA-PSK-SHA256
proto=RSN
group=CCMP
pairwise=CCMP
psk="12345678"
}
When waiting for the AP to be established, interrupting wpa_supplicant
with <ctrl-c> and starting it again this happens:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000
| [0000000000000140] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio
+mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs
+imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6
| CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18
| Hardware name: somemachine (DT)
| Workqueue: events sdio_irq_work
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| lr : mwifiex_get_cfp+0x34/0x15c [mwifiex]
| sp : ffff8000818b3a70
| x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004
| x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9
| x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000
| x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000
| x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517
| x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1
| x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157
| x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124
| x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000
| Call trace:
| mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex]
| mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex]
| mwifiex_process_sta_event+0x298/0xf0c [mwifiex]
| mwifiex_process_event+0x110/0x238 [mwifiex]
| mwifiex_main_process+0x428/0xa44 [mwifiex]
| mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio]
| process_sdio_pending_irqs+0x64/0x1b8
| sdio_irq_work+0x4c/0x7c
| process_one_work+0x148/0x2a0
| worker_thread+0x2fc/0x40c
| kthread+0x110/0x114
| ret_from_fork+0x10/0x20
| Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000)
| ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Remove tst_run from lwt_seg6local_prog_ops.
The syzbot reported that the lwt_seg6 related BPF ops can be invoked
via bpf_test_run() without without entering input_action_end_bpf()
first.
Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL
probably didn't work since it was introduced in commit 04d4b274e2a
("ipv6: sr: Add seg6local action End.BPF"). The reason is that the
per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self
test case but each BPF function expects it.
Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info()
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Add missing bridge lock to pci_bus_lock()
One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
Call Trace:
<TASK>
? __warn+0x8c/0x190
? pci_bridge_secondary_bus_reset+0x5d/0x70
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? pci_bridge_secondary_bus_reset+0x5d/0x70
pci_reset_bus+0x1d8/0x270
vmd_probe+0x778/0xa10
pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com] |
| In the Linux kernel, the following vulnerability has been resolved:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix kernel crash if commands allocation fails
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double put of @cfile in smb2_rename_path()
If smb2_set_path_attr() is called with a valid @cfile and returned
-EINVAL, we need to call cifs_get_writable_path() again as the
reference of @cfile was already dropped by previous smb2_compound_op()
call. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race between direct IO write and fsync when using same fd
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mod
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Ensure array index tg_inst won't be -1
[WHY & HOW]
tg_inst will be a negative if timing_generator_count equals 0, which
should be checked before used.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: SHAMPO, Fix incorrect page release
Under the following conditions:
1) No skb created yet
2) header_size == 0 (no SHAMPO header)
3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the
last page fragment of a SHAMPO header page)
a new skb is formed with a page that is NOT a SHAMPO header page (it
is a regular data page). Further down in the same function
(mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from
header_index is released. This is wrong and it leads to SHAMPO header
pages being released more than once. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor
Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.
This fixes the path:
msgdma_free_chan_resources -> msgdma_free_descriptors ->
msgdma_free_desc_list -> msgdma_free_descriptor
which does not correctly free the descriptors as first nodes were not
removed from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Prevent unmapping active read buffers
The kms paths keep a persistent map active to read and compare the cursor
buffer. These maps can race with each other in simple scenario where:
a) buffer "a" mapped for update
b) buffer "a" mapped for compare
c) do the compare
d) unmap "a" for compare
e) update the cursor
f) unmap "a" for update
At step "e" the buffer has been unmapped and the read contents is bogus.
Prevent unmapping of active read buffers by simply keeping a count of
how many paths have currently active maps and unmap only when the count
reaches 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix prime with external buffers
Make sure that for external buffers mapping goes through the dma_buf
interface instead of trying to access pages directly.
External buffers might not provide direct access to readable/writable
pages so to make sure the bo's created from external dma_bufs can be
read dma_buf interface has to be used.
Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't
trigger this due to the fact that virtual machines will not have
multiple GPUs but it enables better test coverage in IGT. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: reset mmio mappings with devm
Set our various mmio mappings to NULL. This should make it easier to
catch something rogue trying to mess with mmio after device removal. For
example, we might unmap everything and then start hitting some mmio
address which has already been unmamped by us and then remapped by
something else, causing all kinds of carnage. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to
checking for the security label, then args.context will be set to
uninitialized junk on the stack, which we'll then try to free.
Initialize it early. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix potential UAF in nfsd4_cb_getattr_release
Once we drop the delegation reference, the fields embedded in it are no
longer safe to access. Do that last. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux,smack: don't bypass permissions check in inode_setsecctx hook
Marek Gresko reports that the root user on an NFS client is able to
change the security labels on files on an NFS filesystem that is
exported with root squashing enabled.
The end of the kerneldoc comment for __vfs_setxattr_noperm() states:
* This function requires the caller to lock the inode's i_mutex before it
* is executed. It also assumes that the caller will make the appropriate
* permission checks.
nfsd_setattr() does do permissions checking via fh_verify() and
nfsd_permission(), but those don't do all the same permissions checks
that are done by security_inode_setxattr() and its related LSM hooks do.
Since nfsd_setattr() is the only consumer of security_inode_setsecctx(),
simplest solution appears to be to replace the call to
__vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This
fixes the above issue and has the added benefit of causing nfsd to
recall conflicting delegations on a file when a client tries to change
its security label. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix random crash seen while removing driver
This fixes the random kernel crash seen while removing the driver, when
running the load/unload test over multiple iterations.
1) modprobe btnxpuart
2) hciconfig hci0 reset
3) hciconfig (check hci0 interface up with valid BD address)
4) modprobe -r btnxpuart
Repeat steps 1 to 4
The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(),
which gets scheduled after module is removed, causing a kernel crash.
This hidden issue got highlighted after enabling Power Save by default
in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on
startup)
The new ps_cleanup() deasserts UART break immediately while closing
serdev device, cancels any scheduled ps_work and destroys the ps_lock
mutex.
[ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258
[ 85.884624] Mem abort info:
[ 85.884625] ESR = 0x0000000086000007
[ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits
[ 85.884633] SET = 0, FnV = 0
[ 85.884636] EA = 0, S1PTW = 0
[ 85.884638] FSC = 0x07: level 3 translation fault
[ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000
[ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000
[ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP
[ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)]
[ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1
[ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT)
[ 85.936182] Workqueue: events 0xffffd4a61638f380
[ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 85.952817] pc : 0xffffd4a61638f258
[ 85.952823] lr : 0xffffd4a61638f258
[ 85.952827] sp : ffff8000084fbd70
[ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000
[ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305
[ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970
[ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000
[ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090
[ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139
[ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50
[ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8
[ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000
[ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000
[ 85.977443] Call trace:
[ 85.977446] 0xffffd4a61638f258
[ 85.977451] 0xffffd4a61638f3e8
[ 85.977455] process_one_work+0x1d4/0x330
[ 85.977464] worker_thread+0x6c/0x430
[ 85.977471] kthread+0x108/0x10c
[ 85.977476] ret_from_fork+0x10/0x20
[ 85.977488] Code: bad PC value
[ 85.977491] ---[ end trace 0000000000000000 ]---
Preset since v6.9.11 |
