| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| fprintd through 1.94.3 lacks a security attention mechanism, and thus unexpected actions might be authorized by "auth sufficient pam_fprintd.so" for Sudo. NOTE: the supplier disputes this because they believe issue resolution would involve modifying the PAM configuration to restrict pam_fprintd.so to front-ends that implement a proper attention mechanism, not modifying pam_fprintd.so or fprintd. |
| Chainlit versions prior to 2.8.5 contain an authorization bypass through user-controlled key vulnerability. If this vulnerability is exploited, threads may be viewed or thread ownership may be obtained by an attacker who can log in to the product. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix create memory region overlap check
The current check is incorrect; it only checks if the beginning or end
of a region is within an existing region. This doesn't account for
userspace specifying a region that begins before and ends after an
existing region.
Change the logic to a range intersection check against gfns and uaddrs
for each region.
Remove mshv_partition_region_by_uaddr() as it is no longer used. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Implement settime64 with -EOPNOTSUPP
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference.
The fix is similar to commit 329d050bbe63 ("gve: Implement settime64
with -EOPNOTSUPP"). |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: amlogic-a4: fix double free caused by devm
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the redundant clk_disable_unprepare() calls from the probe
error path and aml_rtc_remove(), allowing the devm framework to
automatically manage the clock lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: remove broken i2c driver
The MOST I2C driver has been completely broken for five years without
anyone noticing so remove the driver from staging.
Specifically, commit 723de0f9171e ("staging: most: remove device from
interface structure") started requiring drivers to set the interface
device pointer before registration, but the I2C driver was never updated
which results in a NULL pointer dereference if anyone ever tries to
probe it. |
| In the Linux kernel, the following vulnerability has been resolved:
backlight: led-bl: Add devlink to supplier LEDs
LED Backlight is a consumer of one or multiple LED class devices, but
devlink is currently unable to create correct supplier-producer links when
the supplier is a class device. It creates instead a link where the
supplier is the parent of the expected device.
One consequence is that removal order is not correctly enforced.
Issues happen for example with the following sections in a device tree
overlay:
// An LED driver chip
pca9632@62 {
compatible = "nxp,pca9632";
reg = <0x62>;
// ...
addon_led_pwm: led-pwm@3 {
reg = <3>;
label = "addon:led:pwm";
};
};
backlight-addon {
compatible = "led-backlight";
leds = <&addon_led_pwm>;
brightness-levels = <255>;
default-brightness-level = <255>;
};
In this example, the devlink should be created between the backlight-addon
(consumer) and the pca9632@62 (supplier). Instead it is created between the
backlight-addon (consumer) and the parent of the pca9632@62, which is
typically the I2C bus adapter.
On removal of the above overlay, the LED driver can be removed before the
backlight device, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
Call trace:
led_put+0xe0/0x140
devm_led_release+0x6c/0x98
Another way to reproduce the bug without any device tree overlays is
unbinding the LED class device (pca9632@62) before unbinding the consumer
(backlight-addon):
echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind
echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind
Fix by adding a devlink between the consuming led-backlight device and the
supplying LED device, as other drivers and subsystems do as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring()
In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA
allocations in a loop. When an allocation fails, the previously
successful allocations are not freed on exit.
Fix that by jumping to err_free_rings label on error, which calls
rtl8180_free_rx_ring() to free the allocations. Remove the free of
rx_ring in rtl8180_init_rx_ring() error path, and set the freed
priv->rx_buf entry to null, to avoid double free. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show
In iommu_mmio_write(), it validates the user-provided offset with the
check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`.
This assumes a 4-byte access. However, the corresponding
show handler, iommu_mmio_show(), uses readq() to perform an 8-byte
(64-bit) read.
If a user provides an offset equal to `mmio_phys_end - 4`, the check
passes, and will lead to a 4-byte out-of-bounds read.
Fix this by adjusting the boundary check to use sizeof(u64), which
corresponds to the size of the readq() operation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: initialize work queue before error checks
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails. |
| AccessAlly WordPress plugin versions prior to 3.3.2 contain an unauthenticated arbitrary PHP code execution vulnerability in the Login Widget. The plugin processes the login_error parameter as PHP code, allowing an attacker to supply and execute arbitrary PHP in the context of the WordPress web server process, resulting in remote code execution. |
| Selea CarPlateServer 4.0.1.6 contains an unquoted service path vulnerability in the Windows service configuration that allows local users to potentially execute code with elevated privileges. Attackers can exploit the service's unquoted binary path by inserting malicious code in the system root path that could execute with LocalSystem privileges during application startup or reboot. |
| Elaniin CMS 1.0 contains an authentication bypass vulnerability that allows attackers to access the dashboard by manipulating the login page with SQL injection. Attackers can bypass authentication by sending crafted email and password parameters with '=''or' payload to login.php, granting unauthorized access to the system. |
| TimeClock Software 1.01 contains an authenticated time-based SQL injection vulnerability that allows attackers to enumerate valid usernames by manipulating the 'notes' parameter. Attackers can inject conditional time delays in the add_entry.php endpoint to determine user existence by measuring response time differences. |
| BarcodeOCR 19.3.6 contains an unquoted service path vulnerability that allows local attackers to execute code with elevated privileges during system startup. Attackers can exploit the unquoted path in the service configuration to inject malicious executables that will run with LocalSystem privileges. |
| CodeMeter 6.60 contains an unquoted service path vulnerability that allows local users to potentially execute arbitrary code with elevated system privileges. Attackers can exploit the unquoted binary path in the CodeMeter Runtime Server service to inject malicious code that would execute with LocalSystem permissions. |
| GOautodial 4.0 contains a persistent cross-site scripting vulnerability that allows authenticated agents to inject malicious scripts through message subjects. Attackers can craft messages with embedded JavaScript that will execute when an administrator reads the message, potentially stealing session cookies or executing client-side attacks. |
| SonarQube 8.3.1 contains an unquoted service path vulnerability that allows local attackers to gain SYSTEM privileges by exploiting the service executable path. Attackers can replace the wrapper.exe in the service path with a malicious executable to execute code with highest system privileges during service restart. |
| MedDream PACS Server 6.8.3.751 contains an authenticated remote code execution vulnerability that allows authorized users to upload malicious PHP files. Attackers can exploit the uploadImage.php endpoint by authenticating and uploading a PHP shell to execute arbitrary system commands with elevated privileges. |
| 10-Strike Bandwidth Monitor 3.9 contains an unquoted service path vulnerability in multiple services that allows local attackers to escalate privileges. Attackers can place a malicious executable in specific file path locations to achieve privilege escalation to SYSTEM during service startup. |
