| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file.
This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file. |
| Twig is a template language for PHP. When using the ?? operator, output escaping was missing for the expression on the left side of the operator. This vulnerability is fixed in 3.19.0. |
| An issue was discovered in the oidc (aka OpenID Connect Authentication) extension before 4.0.0 for TYPO3. The account linking logic allows a pre-hijacking attack, leading to Account Takeover. The attack can only be exploited if the following requirements are met: (1) an attacker can anticipate the e-mail address of the user, (2) an attacker can register a public frontend user account using that e-mail address before the user's first OIDC login, and (3) the IDP returns an email field containing the e-mail address of the user, |
| When pglogical attempts to replicate data, it does not verify it is using a replication connection, which means a user with CONNECT access to a database configured for replication can execute the pglogical command to obtain read access to replicated tables. When pglogical runs it should verify it is running on a replication connection but does not perform this check. This vulnerability was introduced in the pglogical 3.x codebase, which is proprietary to EDB. The same code base has been integrated into BDR/PGD 4 and 5.
To exploit the vulnerability the attacker needs at least CONNECT permissions to a database configured for replication and must understand a number of pglogical3/BDR specific commands and be able to decode the binary protocol. |
| Under heavy system utilization a random race condition can occur during authentication or token refresh operation. This flaw allows one user to be granted a token intended for another user, resulting in impersonation until the session is ended. This flaw cannot be intentionally exploited due to the required concurring action by two users. However, if the event occurs a user would be inadvertently exposed to another user’s system rights and data access. |
| SAP S/4HANA allows an attacker with user privileges to exploit a vulnerability in the function module exposed via RFC. This flaw enables the injection of arbitrary ABAP code into the system, bypassing essential authorization checks. This vulnerability effectively functions as a backdoor, creating the risk of full system compromise, undermining the confidentiality, integrity and availability of the system. |
| Koha before 24.11.02 allows admins to execute arbitrary commands via shell metacharacters in the tools/scheduler.pl report parameter. |
| Open Networking Foundation SD-RAN ONOS onos-lib-go 0.10.28 allows an index out-of-range panic in asn1/aper GetBitString via a zero value of numBits. |
| SAP Capital Yield Tax Management has directory traversal vulnerability due to insufficient path validation. This could allow an attacker with low privileges to read files from directory which they don�t have access to, hence causing a high impact on confidentiality. Integrity and Availability are not affected. |
| Harbor is an open source trusted cloud native registry project that stores, signs, and scans content. Versions 2.11.2 and below, as well as versions 2.12.0-rc1 and 2.13.0-rc1, contain a vulnerability where the markdown field in the info tab page can be exploited to inject XSS code. This is fixed in versions 2.11.3 and 2.12.3. |
| Cursor is a code editor built for programming with AI. In versions 0.45.0 through 0.48.6, the Cursor app introduced a regression affecting the set of file paths the Cursor Agent is permitted to modify automatically. Under specific conditions, the agent could be prompted, either directly by the user or via maliciously crafted context, to automatically write to files outside of the opened workspace. This behavior required deliberate prompting, making successful exploitation highly impractical in real-world scenarios. Furthermore, the edited file was still displayed in the UI as usual for user review, making it unlikely for the edit to go unnoticed by the user. This vulnerability is fixed in 0.48.7. |
| A remote unauthenticated attacker may be able to bypass authentication
by utilizing a specific API route to execute arbitrary OS commands. |
| A remote unauthenticated attacker may use default certificates to generate JWT Tokens and gain full access to the tool and all connected devices. |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| In the Linux kernel, the following vulnerability has been resolved:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.
This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.
This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor. |
| Vendure is an open-source headless commerce platform. Prior to versions 3.0.5 and 2.3.3, a vulnerability in Vendure's asset server plugin allows an attacker to craft a request which is able to traverse the server file system and retrieve the contents of arbitrary files, including sensitive data such as configuration files, environment variables, and other critical data stored on the server. In the same code path is an additional vector for crashing the server via a malformed URI. Patches are available in versions 3.0.5 and 2.3.3. Some workarounds are also available. One may use object storage rather than the local file system, e.g. MinIO or S3, or define middleware which detects and blocks requests with urls containing `/../`. |
| Multiple endpoints in `oracle-sidecar` in versions 0.347.0 to 0.543.0 were found to be vulnerable to SQL injections. |
| A weakness has been identified in 299ko up to 2.0.0. Affected by this issue is the function getSentDir/delete of the file plugin/filemanager/controllers/FileManagerAPIController.php. Executing manipulation can lead to path traversal. It is possible to launch the attack remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| An unauthenticated debug port may allow access to the device file system. |
