| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in IROAD Dash Cam X5 up to 20250203. It has been rated as problematic. This issue affects some unknown processing of the component SSID. The manipulation leads to use of default credentials. The attack needs to be initiated within the local network. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability classified as critical has been found in IROAD X5 Mobile App up to 5.2.5 on Android. Affected is an unknown function of the component API Endpoint. The manipulation leads to hard-coded credentials. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Sending a crafted SOAP "provision" operation message PlanId field within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause path traversal issue in Nokia Single RAN baseband software with versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later.
Beginning with release 24R1-SR 1.0 MP, the OAM service software performed PlanId field input validations mitigate the reported path traversal issue. |
| Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board.
This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later |
| Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file.
This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file. |
| Twig is a template language for PHP. When using the ?? operator, output escaping was missing for the expression on the left side of the operator. This vulnerability is fixed in 3.19.0. |
| An issue was discovered in the oidc (aka OpenID Connect Authentication) extension before 4.0.0 for TYPO3. The account linking logic allows a pre-hijacking attack, leading to Account Takeover. The attack can only be exploited if the following requirements are met: (1) an attacker can anticipate the e-mail address of the user, (2) an attacker can register a public frontend user account using that e-mail address before the user's first OIDC login, and (3) the IDP returns an email field containing the e-mail address of the user, |
| When pglogical attempts to replicate data, it does not verify it is using a replication connection, which means a user with CONNECT access to a database configured for replication can execute the pglogical command to obtain read access to replicated tables. When pglogical runs it should verify it is running on a replication connection but does not perform this check. This vulnerability was introduced in the pglogical 3.x codebase, which is proprietary to EDB. The same code base has been integrated into BDR/PGD 4 and 5.
To exploit the vulnerability the attacker needs at least CONNECT permissions to a database configured for replication and must understand a number of pglogical3/BDR specific commands and be able to decode the binary protocol. |
| Under heavy system utilization a random race condition can occur during authentication or token refresh operation. This flaw allows one user to be granted a token intended for another user, resulting in impersonation until the session is ended. This flaw cannot be intentionally exploited due to the required concurring action by two users. However, if the event occurs a user would be inadvertently exposed to another user’s system rights and data access. |
| SAP S/4HANA allows an attacker with user privileges to exploit a vulnerability in the function module exposed via RFC. This flaw enables the injection of arbitrary ABAP code into the system, bypassing essential authorization checks. This vulnerability effectively functions as a backdoor, creating the risk of full system compromise, undermining the confidentiality, integrity and availability of the system. |
| Koha before 24.11.02 allows admins to execute arbitrary commands via shell metacharacters in the tools/scheduler.pl report parameter. |
| Open Networking Foundation SD-RAN ONOS onos-lib-go 0.10.28 allows an index out-of-range panic in asn1/aper GetBitString via a zero value of numBits. |
| A remote unauthenticated attacker may use default certificates to generate JWT Tokens and gain full access to the tool and all connected devices. |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| In the Linux kernel, the following vulnerability has been resolved:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.
This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.
This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request()
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later. |
| Stored Cross-Site Scripting (XSS) vulnerability type in LUNA software v7.5.5.6. This vulnerability allows an attacker to execute JavaScript code in the victim's browser by inyecting a malicious payload through the 'Edit Batch Name' function. THe payload is stored by the application and subsequently displayed without proper sanitization when other users access it. This vulnerability can be exploited to steal sensitive user data, such as session cookies, or to perform actions on behalf of the user. |
| Incorrect authentication vulnerability in OpenSIAC, which could allow an attacker to impersonate a person using Cl@ve as an authentication method. |
| Incorrect Cross-Origin Resource Sharing (CORS) configuration in Hiberus Sintra. Cross-Origin Resource Sharing (CORS) allows browsers to make cross-domain requests in a controlled manner. This request has an “Origin” header that identifies the domain making the initial request and defines the protocol between a browser and a server to see if the request is allowed. An attacker can exploit this and potentially perform privileged actions and access confidential information when Access-Control-Allow-Credentials is enabled. |
