| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file.
This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file. |
| Twig is a template language for PHP. When using the ?? operator, output escaping was missing for the expression on the left side of the operator. This vulnerability is fixed in 3.19.0. |
| An issue was discovered in the oidc (aka OpenID Connect Authentication) extension before 4.0.0 for TYPO3. The account linking logic allows a pre-hijacking attack, leading to Account Takeover. The attack can only be exploited if the following requirements are met: (1) an attacker can anticipate the e-mail address of the user, (2) an attacker can register a public frontend user account using that e-mail address before the user's first OIDC login, and (3) the IDP returns an email field containing the e-mail address of the user, |
| When pglogical attempts to replicate data, it does not verify it is using a replication connection, which means a user with CONNECT access to a database configured for replication can execute the pglogical command to obtain read access to replicated tables. When pglogical runs it should verify it is running on a replication connection but does not perform this check. This vulnerability was introduced in the pglogical 3.x codebase, which is proprietary to EDB. The same code base has been integrated into BDR/PGD 4 and 5.
To exploit the vulnerability the attacker needs at least CONNECT permissions to a database configured for replication and must understand a number of pglogical3/BDR specific commands and be able to decode the binary protocol. |
| Under heavy system utilization a random race condition can occur during authentication or token refresh operation. This flaw allows one user to be granted a token intended for another user, resulting in impersonation until the session is ended. This flaw cannot be intentionally exploited due to the required concurring action by two users. However, if the event occurs a user would be inadvertently exposed to another user’s system rights and data access. |
| SAP S/4HANA allows an attacker with user privileges to exploit a vulnerability in the function module exposed via RFC. This flaw enables the injection of arbitrary ABAP code into the system, bypassing essential authorization checks. This vulnerability effectively functions as a backdoor, creating the risk of full system compromise, undermining the confidentiality, integrity and availability of the system. |
| Koha before 24.11.02 allows admins to execute arbitrary commands via shell metacharacters in the tools/scheduler.pl report parameter. |
| Open Networking Foundation SD-RAN ONOS onos-lib-go 0.10.28 allows an index out-of-range panic in asn1/aper GetBitString via a zero value of numBits. |
| A remote unauthenticated attacker may use default certificates to generate JWT Tokens and gain full access to the tool and all connected devices. |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.
This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.
This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request()
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later. |
| Stored Cross-Site Scripting (XSS) vulnerability type in LUNA software v7.5.5.6. This vulnerability allows an attacker to execute JavaScript code in the victim's browser by inyecting a malicious payload through the 'Edit Batch Name' function. THe payload is stored by the application and subsequently displayed without proper sanitization when other users access it. This vulnerability can be exploited to steal sensitive user data, such as session cookies, or to perform actions on behalf of the user. |
| Incorrect authentication vulnerability in OpenSIAC, which could allow an attacker to impersonate a person using Cl@ve as an authentication method. |
| Incorrect Cross-Origin Resource Sharing (CORS) configuration in Hiberus Sintra. Cross-Origin Resource Sharing (CORS) allows browsers to make cross-domain requests in a controlled manner. This request has an “Origin” header that identifies the domain making the initial request and defines the protocol between a browser and a server to see if the request is allowed. An attacker can exploit this and potentially perform privileged actions and access confidential information when Access-Control-Allow-Credentials is enabled. |
| Stored XSS vulnerability in Creativeitem Sociopro due to lack of proper validation of user inputs via the endpoint '/sociopro/profile/update_profile', affecting to 'name' parameter via POST. This vulnerability could allow a remote user to send a specially crafted query to an authenticated user and steal his/her cookie session details. |
| An authenticated command injection vulnerability exists in the Command line interface of HPE Networking Instant On Access Points.
A successful exploitation could allow a remote attacker with elevated privileges to execute arbitrary commands on the underlying operating system as a highly privileged user. |
| JumpCloud Remote Assist for Windows versions prior to 0.317.0 include an uninstaller that is invoked by the JumpCloud Windows Agent as NT AUTHORITY\SYSTEM during agent uninstall or update operations. The Remote Assist uninstaller performs privileged create, write, execute, and delete actions on predictable files inside a user-writable %TEMP% subdirectory without validating that the directory is trusted or resetting its ACLs when it already exists. A local, low-privileged attacker can pre-create the directory with weak permissions and leverage mount-point or symbolic-link redirection to (a) coerce arbitrary file writes to protected locations, leading to denial of service (e.g., by overwriting sensitive system files), or (b) win a race to redirect DeleteFileW() to attacker-chosen targets, enabling arbitrary file or folder deletion and local privilege escalation to SYSTEM. This issue is fixed in JumpCloud Remote Assist 0.317.0 and affects Windows systems where Remote Assist is installed and managed through the Agent lifecycle. |
| A vulnerability, which was classified as problematic, has been found in Wangshen SecGate 3600 2400. This issue affects some unknown processing of the file ?g=log_export_file. The manipulation of the argument file_name leads to path traversal. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability has been identified in Mendix Studio Pro 10 (All versions < V10.23.0), Mendix Studio Pro 10.12 (All versions < V10.12.17), Mendix Studio Pro 10.18 (All versions < V10.18.7), Mendix Studio Pro 10.6 (All versions < V10.6.24), Mendix Studio Pro 11 (All versions < V11.0.0), Mendix Studio Pro 8 (All versions < V8.18.35), Mendix Studio Pro 9 (All versions < V9.24.35). A zip path traversal vulnerability exists in the module installation process of Studio Pro. By crafting a malicious module and distributing it via (for example) the Mendix Marketplace, an attacker could write or modify arbitrary files in directories outside a developer’s project directory upon module installation. |
