| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline]
configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185
Unhash in configfs_remove_dir(), while the item is still guaranteed to be
there. A reference obtained just before that stays harmless, as
create_link() rechecks CONFIGFS_USET_DROPPING, already set by
configfs_detach_prep(). Both configfs_unregister_subsystem() paths
d_drop() after detaching, so this only makes rmdir match them. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this element that is used to find the trace_array to
increment its reference counter is also freed when the instance is
removed.
To solve this, add a trace_array_tracer_options_get() helper function that
will take the address of the element that is passed to the open function
by the inode->i_private pointer and search all the trace_arrays under a
lock to find the one that the element's address is in the range of the
trace_arrays topts array elements. When a match happens, that trace_array's
reference would be increased.
Note, there's a race where if an admin was deleting and creating trace
instances at the same time and the memory of the old trace_array's array
matched the memory of the new trace_array that it could in theory open the
option from the wrong trace array. But we do not care because it would be
stupid to perform that kind of action. As long as the only thing that can
happen is that the option from the wrong trace array is used and doesn't
crash the kernel it will only make the user confused. But if they are
doing something stupid like this, they are already confused, so no harm
done. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: fork: Initialize function graph state before copy_exec_state()
dup_task_struct() copies the parent's task_struct, including ret_stack.
ftrace_graph_init_task() clears the copied function graph state, but it
currently runs after copy_exec_state().
For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state.
If that allocation fails, copy_process() reaches bad_fork_free and
free_task() calls ftrace_graph_exit_task(). Since the child still carries
the parent's ret_stack pointer, the unwind frees the parent's active
function graph return stack. The parent subsequently accesses freed memory
from function_graph_enter_regs().
KASAN reports:
[ 22.190920] ==================================================================
[ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90
[ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1
[ 22.205134]
[ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy)
[ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 22.213750] Call Trace:
[ 22.215271] <TASK>
[ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.217774] dump_stack_lvl+0x4e/0x70
[ 22.220531] print_report+0x157/0x4b4
[ 22.223202] ? fixup_red_left+0x9/0x30
[ 22.224407] ? complete_report_info+0x83/0x110
[ 22.226679] ? function_graph_enter_regs+0xa76/0xb90
[ 22.228084] kasan_report+0xce/0x100
[ 22.230109] ? function_graph_enter_regs+0xa76/0xb90
[ 22.232860] ? stack_trace_save+0x4/0xd0
[ 22.234156] function_graph_enter_regs+0xa76/0xb90
[ 22.236090] ? kasan_save_stack+0x30/0x50
[ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10
[ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80
[ 22.239628] ? stack_trace_save+0x4/0xd0
[ 22.242121] ? stack_trace_save+0x4/0xd0
[ 22.243588] ftrace_graph_func+0xda/0x160
[ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.246520] 0xffffffffa0000095
[ 22.250528] ? stack_trace_save+0x9/0xd0
[ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0
[ 22.253152] stack_trace_save+0x9/0xd0
[ 22.254264] kasan_save_stack+0x30/0x50
[ 22.273631] kasan_save_track+0x14/0x30
[ 22.276763] kasan_save_free_info+0x3b/0x70
[ 22.278296] __kasan_slab_free+0x43/0x70
[ 22.280157] kmem_cache_free+0xbf/0x3b0
[ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.284001] free_task+0xa2/0x160
[ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.286752] copy_process+0x2aae/0x7bc0
Initialize the child function graph state immediately after
dup_task_struct(), before the first fallible operation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation
with an mmap_count check performed under the PCM stream lock, but the
lock is released long before the buffer is actually freed:
snd_pcm_sync_stop(), constraint refinement and do_free_pages() all
happen in between. snd_pcm_mmap_data(), on the other hand, takes no
lock at all: it validates against the old buffer's state and
dma_bytes, remaps its pages into the VMA, and only then increments
mmap_count.
A concurrent mmap() can therefore slip in between the check and the
free. remap_pfn_range() installs writable PTEs for the old buffer's
pages without taking page references, and the subsequent
do_free_pages() returns those pages to the page allocator while the
VMA still maps them. This leaves a stale, writable mapping of freed
pages: a page-level use-after-free that can be leveraged for local
privilege escalation.
Make snd_pcm_mmap_data() participate in the buffer-access scheme
introduced for hw_params/hw_free: acquire runtime->buffer_accessing
before validating and remapping, and release it afterwards. Buffer
reallocation already fails with -EBUSY while accessors are active,
and the mmap side now fails with -EBUSY while a reallocation is in
progress, so the validate/remap sequence and the check/free sequence
can no longer interleave.
A reproducer that turns this race into a stale writable mapping of
the freed DMA buffer pages is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file->triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) < 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: disable DIM work before freeing q_vectors
idpf never drains the Tx/Rx DIM works before freeing the memory they
live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they
are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel()
ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them.
idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory:
idpf_vport_intr_write_itr() writes the ITR register through
q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of
the freed q_vector. No configuration is needed to get there --
IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc()
initialises both modes to IDPF_ITR_DYNAMIC.
Draining after idpf_vport_intr_napi_dis_all() is not enough on its own.
idpf_net_dim() is called from inside the
"if (napi_complete_done(napi, work_done))" branch of the poll, and
napi_complete_done() has already cleared NAPIF_STATE_SCHED by then.
napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED |
NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is
still queueing the work, and a plain cancel_work_sync() would be
re-armed behind the drain.
Use disable_work_sync(): schedule_work() on a work with a non-zero
disable count is dropped by clear_pending_if_disabled() before
__queue_work() is reached.
Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are
initialised on every path that can reach the drain -- the three
"goto intr_deinit" sites between idpf_vport_intr_init() and
idpf_vport_intr_ena() get there without the enable side having run.
Nothing re-enables them: rsrc->q_vectors is freed on every exit from
idpf_vport_open() and on every idpf_vport_stop(), so the count dies with
the object.
It is a race, not a deterministic failure -- net_dim() only schedules
once DIM_NEVENTS events have accumulated and the profile index changes.
A KASAN ifup/ifdown loop under load is the way to see it. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: cc2520: fix FIFOP work use-after-free
The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal,
cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ
remains active until after ->remove() returns and can queue the work
again after that flush, allowing it to run after the private data is
released.
Disable the work with disable_work_sync() instead of flushing it, so
the handler can no longer queue it once removal begins. Destroy the
buffer mutex last, since the worker and the stop callback invoked
through ieee802154_unregister_hw() both take it.
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| RouterOS WebFig contains an unauthenticated file-read vulnerability in the /jsproxy path where a newly allocated session retains a stale uninitialized principal pointer used for file authorization. An unauthenticated attacker can prepare the allocator so that the file-serving path dereferences this pointer with sufficient rights, then supply parent-directory components in an encrypted URI to escape the WebFig file namespace and disclose root-owned files, including configuration stores containing credentials.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable) |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix P2P-Device binding handling
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix UAF race in destroy_queue_cpsch
wait_on_destroy_queue() drops locks to wait for queue resume, allowing
a concurrent destroy to free the queue. Use is_being_destroyed flag to
serialize destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: quiesce DMA before freeing resources
pdsc_teardown() frees DMA buffers but does not disable bus mastering,
leaving the device able to perform DMA after the buffers are freed.
This can lead to use-after-free if the device writes to freed memory.
Add pci_clear_master() to pdsc_teardown() to disable bus mastering
before freeing resources, ensuring all DMA is quiesced.
Add pci_set_master() to pdsc_setup() to re-enable bus mastering,
which is needed for the firmware recovery path since pdsc_teardown()
now disables it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidpp: fix potential UAF in hidpp_connect_event()
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move free_irq out of the close-time spinlocked section
au1000_close() calls free_irq() while aup->lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: flush pending RCU callbacks on module unload
Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks
before freeing module text, preventing late callback execution in freed memory.
BUG: unable to handle page fault for address: ffffffffc1d59c40
PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0
Oops: 0010 [#1] SMP NOPTI
RIP: 0010:0xffffffffc1d59c40
Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16.
RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286
RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590
RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290
RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700
R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? rcu_do_batch+0x163/0x450
? rcu_core+0x177/0x1c0
? __do_softirq+0xc1/0x280
? asm_call_irq_on_stack+0xf/0x20
</IRQ>
? do_softirq_own_stack+0x37/0x50
? irq_exit_rcu+0xc4/0x100
? sysvec_apic_timer_interrupt+0x36/0x80
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? cpuidle_enter_state+0xd4/0x360
? cpuidle_enter+0x29/0x40
? cpuidle_idle_call+0x108/0x1a0
? do_idle+0x77/0xf0
? cpu_startup_entry+0x19/0x20
? secondary_startup_64_no_verify+0xbf/0xcb
(cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol()
If during relocation we fail in insert_dirty_subvol() because
btrfs_update_reloc_root() returned an error, we will leave a root's
reloc_root field pointing to a reloc root that was freed instead of NULL,
resulting later in a use-after-free, or double free attempt during
unmount.
The sequence of steps is this:
1) During relocation the call to btrfs_update_reloc_root() in
insert_dirty_subvol() fails, so insert_dirty_subvol() returns the
error to merge_reloc_root() without adding the root to the list
rc->dirty_subvol_roots;
2) Then merge_reloc_root() aborts the current transaction because
insert_dirty_subvol() returned an error;
3) Up the call chain, merge_reloc_roots() gets the error, adds the
reloc root for root X to the local reloc_roots list and jumps to the
'out' label, where it calls free_reloc_roots() to free all the reloc
roots in the local reloc_roots list. This frees the reloc root for
root X;
4) We go up the call chain to relocate_block_group() which calls
clean_dirty_subvols() to go over dirty roots and set their
->reloc_root field to NULL, but root X is not in the dirty_subvol_roots
list, so its ->reloc_root still points to a reloc root;
5) Relocation finishes, with an error and a transaction abort, but the
->reloc_root field for root X still points to the reloc root that was
freed in step 3;
6) When unmounting the fs we end up calling:
btrfs_free_fs_roots()
btrfs_drop_and_free_fs_root()
--> calls btrfs_put_root() against root X's ->reloc_root
which is not NULL and points to the already freed
reloc root in step 4 above
Resulting in a use-after-free to a double free attempt.
Syzbot reported this with the following dmesg/syslog:
[ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5)
[ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure
[ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5
[ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction.
[ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0
[ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure
[ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly
[ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure
[ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1
[ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30
[ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30
[ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409
[ 106.682946][ T5338] ==================================================================
[ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250
[ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338
[ 106.693173][ T5338]
[ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
[ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 106.694300][ T5338] Call Trace:
[ 106.694308][ T5338] <TASK>
[ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150
[ 106.694331][ T5338] print_address_description+0x55/0x1e0
[ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250
[ 106.694358][ T5338] print_report+0x58/0x70
[ 106.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: null RX pointers after free
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe. |
