| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Qt 6 through 6.6 was discovered to contain a NULL pointer dereference via the function QXcbConnection::initializeAllAtoms(). NOTE: this is disputed because it is not expected that an X application should continue to run when there is arbitrary anomalous behavior from the X server. |
| An issue in MiniZinc before 2.8.0 allows a NULL pointer dereference via ti_expr in a crafted .mzn file. NOTE: this is disputed because there is no common libminizinc use case in which an unattended process is supposed to run forever to process a series of atttacker-controlled .mzn files. |
| Tex Live 944e257 has a NULL pointer dereference in texk/web2c/pdftexdir/writet1.c. NOTE: this is disputed because it should be categorized as a usability problem. |
| LLVM 15.0.0 has a NULL pointer dereference in the parseOneMetadata() function via a crafted pdflatex.fmt file (or perhaps a crafted .o file) to llvm-lto. NOTE: this is disputed because the relationship between pdflatex.fmt and any LLVM language front end is not explained, and because a crash of the llvm-lto application should be categorized as a usability problem. |
| Sequence of processor instructions leads to unexpected behavior in Intel(R) Core(TM) Ultra Processors may allow an authenticated user to potentially enable denial of service via local access. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Brainstorm Force Ultimate Addons for WPBakery Page Builder allows PHP Local File Inclusion.This issue affects Ultimate Addons for WPBakery Page Builder: from n/a through 3.19.14. |
| Improper Privilege Management vulnerability in Thrive Themes Thrive Theme Builder allows Privilege Escalation.This issue affects Thrive Theme Builder: from n/a before 3.24.0. |
| An issue was discovered in Teledyne FLIR M300 2.00-19. User account passwords are encrypted locally, and can be decrypted to cleartext passwords using the utility umSetup. This utility requires root permissions to execute. |
| An issue was discovered in Teledyne FLIR M300 2.00-19. Unauthenticated remote code execution can occur in the web server. An attacker can exploit this by sending a POST request to the vulnerable PHP page. An attacker can elevate to root permissions with Sudo. |
| An issue was discovered on Mercusys MW325R EU V3 MW325R(EU)_V3_1.11.0 221019 devices. A WAN attacker can make the admin interface unreachable/invisible via an unauthenticated HTTP request. Verification of the data sent by the user does not occur. The web server does not crash, but the admin interface becomes invisible, because the files necessary to display the content are no longer available. A reboot of the router is typically required to restore the correct behavior. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| An infinite loop in the retrieveActiveBody function of Soot before v4.4.1 under Java 8 allows attackers to cause a Denial of Service (DoS). |
| Buffer Overflow vulnerability in osrg gobgp commit 419c50dfac578daa4d11256904d0dc182f1a9b22 allows a remote attacker to cause a denial of service via the handlingError function in pkg/server/fsm.go. |
| Buffer Overflow vulnerability in msoulier tftpy commit 467017b844bf6e31745138a30e2509145b0c529c allows a remote attacker to cause a denial of service via the parse function in the TftpPacketFactory class. |
| An issue was discovered in Grandstream GXP14XX 1.0.8.9 and GXP16XX 1.0.7.13, allows remote attackers to escalate privileges via incorrect access control using an end-user session-identity token. |
| Vtenext 21.02 allows an authenticated attacker to upload arbitrary files, potentially enabling them to execute remote commands. This flaw exists due to the application's failure to enforce proper authentication controls when accessing the Ckeditor file manager functionality. |
| extcap/nrf_sniffer_ble.py, extcap/nrf_sniffer_ble.sh, extcap/SnifferAPI/*.py in Nordic Semiconductor nRF Sniffer for Bluetooth LE 3.0.0, 3.1.0, 4.0.0, 4.1.0, and 4.1.1 have set incorrect file permission, which allows attackers to do code execution via modified bash and python scripts. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Destroy target device if coalesced MMIO unregistration fails
Destroy and free the target coalesced MMIO device if unregistering said
device fails. As clearly noted in the code, kvm_io_bus_unregister_dev()
does not destroy the target device.
BUG: memory leak
unreferenced object 0xffff888112a54880 (size 64):
comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s)
hex dump (first 32 bytes):
38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff 8.g.....8.g.....
e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff .........0g.....
backtrace:
[<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline]
[<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline]
[<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150
[<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323
[<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline]
[<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696
[<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713
[<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline]
[<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline]
[<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
[<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290
[<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
BUG: leak checking failed |
| Improper Privilege Management vulnerability in weDevs WP User Frontend allows Privilege Escalation.This issue affects WP User Frontend: from n/a through 3.6.5. |
| Improper Privilege Management vulnerability in miniOrange WordPress Social Login and Register (Discord, Google, Twitter, LinkedIn) allows Privilege Escalation.This issue affects WordPress Social Login and Register (Discord, Google, Twitter, LinkedIn): from n/a through 7.6.6. |
