| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Mojolicious module before 8.65 for Perl is vulnerable to secure_compare timing attacks that allow an attacker to guess the length of a secret string. Only versions after 1.74 are affected. |
| Minerbabe through V4.16 ships with SSH host keys baked into the installation image, which allows man-in-the-middle attacks and makes identification of all public IPv4 nodes trivial with Shodan.io. |
| A potential vulnerability has been identified for OpenText Operations Bridge Reporter. The vulnerability could be exploited to inject malicious SQL queries. An attack requires to be an authenticated administrator of OBR with network access to the OBR web application. |
| Cross-Site Request Forgery (CSRF) vulnerability in the terms of use page in Liferay Portal before 7.3.6, and Liferay DXP 7.3 before service pack 1, 7.2 before fix pack 11 allows remote attackers to accept the site's terms of use via social engineering and enticing the user to visit a malicious page. |
| Allied Telesis AT-S115 1.2.0 devices before 1.00.024 with Boot Loader 1.00.006 allow Directory Traversal to achieve partial access to data. |
| Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in openEuler iSulad on Linux allows Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions. This vulnerability is associated with program files https://gitee.Com/openeuler/iSulad/blob/master/src/cmd/isulad/main.C.
This issue affects iSulad: 2.0.18-13, from 2.1.4-1 through 2.1.4-2.
|
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in openEuler aops-ceres on Linux allows Command Injection. This vulnerability is associated with program files ceres/function/util.Py.
This issue affects aops-ceres: from 1.3.0 through 1.4.1.
|
| Insufficient user input filtering leads to arbitrary file read by non-authenticated attacker, which results in sensitive information disclosure.
|
| The Net::CIDR::Lite module before 0.22 for Perl does not properly consider extraneous zero characters at the beginning of an IP address string, which (in some situations) allows attackers to bypass access control that is based on IP addresses. |
| The Net::IPV4Addr module 0.10 for Perl does not properly consider extraneous zero characters in an IP address string, which (in some situations) allows attackers to bypass access control that is based on IP addresses. |
| The Net::IPAddress::Util module before 5.000 for Perl does not properly consider extraneous zero characters in an IP address string, which (in some situations) allows attackers to bypass access control that is based on IP addresses. |
| The Kossy module before 0.60 for Perl allows JSON hijacking because of X-Requested-With mishandling. |
| In the Linux kernel, the following vulnerability has been resolved:
vmci_host: fix a race condition in vmci_host_poll() causing GPF
During fuzzing, a general protection fault is observed in
vmci_host_poll().
general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf]
RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926
<- omitting registers ->
Call Trace:
<TASK>
lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162
add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22
poll_wait include/linux/poll.h:49 [inline]
vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x2cc/0x330 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Example thread interleaving that causes the general protection fault
is as follows:
CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context)
----- -----
// Read uninitialized context
context = vmci_host_dev->context;
// Initialize context
vmci_host_dev->context = vmci_ctx_create();
vmci_host_dev->ct_type = VMCIOBJ_CONTEXT;
if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) {
// Dereferencing the wrong pointer
poll_wait(..., &context->host_context);
}
In this scenario, vmci_host_poll() reads vmci_host_dev->context first,
and then reads vmci_host_dev->ct_type to check that
vmci_host_dev->context is initialized. However, since these two reads
are not atomically executed, there is a chance of a race condition as
described above.
To fix this race condition, read vmci_host_dev->context after checking
the value of vmci_host_dev->ct_type so that vmci_host_poll() always
reads an initialized context. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path
The cdns_i2c_master_xfer() function gets a runtime PM reference when the
function is entered. This reference is released when the function is
exited. There is currently one error path where the function exits
directly, which leads to a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4
ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause
null pointer dereference later. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix an issue found by KASAN
Write only correct size (32 instead of 64 bytes). |
| An issue in wanEditor v4.7.11 and fixed in v.4.7.12 and v.5 was discovered to contain a cross-site scripting (XSS) vulnerability via the image upload function. |
| An unauthenticated attacker who can connect to the Web Services feature (HTTP TCP port 80) can issue a WS-Scan SOAP request containing an unexpected JobToken value which will crash the target device. The device will reboot, after which the attacker can reissue the command to repeatedly crash the device. |
| An unauthenticated attacker who can connect to TCP port 9100 can issue a Printer Job Language (PJL) command that will crash the target device. The device will reboot, after which the attacker can reissue the command to repeatedly crash the device. A malformed PJL variable FORMLINES is set to a non number value causing the target to crash. |
| An unauthenticated attacker may perform a limited server side request forgery (SSRF), forcing the target device to open a TCP connection to an arbitrary port number on an arbitrary IP address. This SSRF leverages the WS-Addressing ReplyTo element in a Web service (HTTP TCP port 80) SOAP request. The attacker can not control the data sent in the SSRF connection, nor can the attacker receive any data back. This SSRF is suitable for TCP port scanning of an internal network when the Web service (HTTP TCP port 80) is exposed across a network segment. |
