| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/DOE: Fix destroy_work_on_stack() race
The following debug object splat was observed in testing:
ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510
WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0
...
Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
? debug_print_object+0x7d/0xb0
? __pfx_doe_statemachine_work+0x10/0x10
debug_object_free.part.0+0x11b/0x150
doe_statemachine_work+0x45e/0x510
process_one_work+0x1d4/0x3c0
This occurs because destroy_work_on_stack() was called after signaling
the completion in the calling thread. This creates a race between
destroy_work_on_stack() and the task->work struct going out of scope in
pci_doe().
Signal the work complete after destroying the work struct. This is safe
because signal_task_complete() is the final thing the work item does and
the workqueue code is careful not to access the work struct after. |
| In the Linux kernel, the following vulnerability has been resolved:
net/net_failover: fix txq exceeding warning
The failover txq is inited as 16 queues.
when a packet is transmitted from the failover device firstly,
the failover device will select the queue which is returned from
the primary device if the primary device is UP and running.
If the primary device txq is bigger than the default 16,
it can lead to the following warning:
eth0 selects TX queue 18, but real number of TX queues is 16
The warning backtrace is:
[ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1
[ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014
[ 32.147730] Call Trace:
[ 32.147971] <TASK>
[ 32.148183] dump_stack_lvl+0x48/0x70
[ 32.148514] dump_stack+0x10/0x20
[ 32.148820] netdev_core_pick_tx+0xb1/0xe0
[ 32.149180] __dev_queue_xmit+0x529/0xcf0
[ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0
[ 32.149967] ip_finish_output2+0x278/0x560
[ 32.150327] __ip_finish_output+0x1fe/0x2f0
[ 32.150690] ip_finish_output+0x2a/0xd0
[ 32.151032] ip_output+0x7a/0x110
[ 32.151337] ? __pfx_ip_finish_output+0x10/0x10
[ 32.151733] ip_local_out+0x5e/0x70
[ 32.152054] ip_send_skb+0x19/0x50
[ 32.152366] udp_send_skb.isra.0+0x163/0x3a0
[ 32.152736] udp_sendmsg+0xba8/0xec0
[ 32.153060] ? __folio_memcg_unlock+0x25/0x60
[ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 32.153854] ? sock_has_perm+0x85/0xa0
[ 32.154190] inet_sendmsg+0x6d/0x80
[ 32.154508] ? inet_sendmsg+0x6d/0x80
[ 32.154838] sock_sendmsg+0x62/0x70
[ 32.155152] ____sys_sendmsg+0x134/0x290
[ 32.155499] ___sys_sendmsg+0x81/0xc0
[ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0
[ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0
[ 32.156649] ? get_random_u16+0x69/0xf0
[ 32.156989] ? __fget_light+0xcf/0x110
[ 32.157326] __sys_sendmmsg+0xc4/0x210
[ 32.157657] ? __sys_connect+0xb7/0xe0
[ 32.157995] ? __audit_syscall_entry+0xce/0x140
[ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0
[ 32.158820] __x64_sys_sendmmsg+0x24/0x30
[ 32.159171] do_syscall_64+0x38/0x90
[ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix that by reducing txq number as the non-existent primary-dev does. |
| astral-tokio-tar is a tar archive reading/writing library for async Rust. In versions 0.5.3 and earlier of astral-tokio-tar, tar archives may extract outside of their intended destination directory when using the Entry::unpack_in_raw API. Additionally, the Entry::allow_external_symlinks control (which defaults to true) could be bypassed via a pair of symlinks that individually point within the destination but combine to point outside of it. These behaviors could be used individually or combined to bypass the intended security control of limiting extraction to the given directory. This in turn would allow an attacker with a malicious tar archive to perform an arbitrary file write and potentially pivot into code execution. This issue has been patched in version 0.5.4. There is no workaround other than upgrading. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Check for uptr overflow
syzkaller found that setting up a map with a user VA that wraps past zero
can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0
due to invalid arguments.
Prevent creating a pages with a uptr and size that would math overflow.
WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390
Modules linked in:
CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:pfn_reader_user_pin+0x2e6/0x390
Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00
RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72
RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002
RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e
R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60
R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000
FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
pfn_reader_next+0x14a/0x7b0
? interval_tree_double_span_iter_update+0x11a/0x140
pfn_reader_first+0x140/0x1b0
iopt_pages_rw_slow+0x71/0x280
? __this_cpu_preempt_check+0x20/0x30
iopt_pages_rw_access+0x2b2/0x5b0
iommufd_access_rw+0x19f/0x2f0
iommufd_test+0xd11/0x16f0
? write_comp_data+0x2f/0x90
iommufd_fops_ioctl+0x206/0x330
__x64_sys_ioctl+0x10e/0x160
? __pfx_iommufd_fops_ioctl+0x10/0x10
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all()
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Silence a warning in btf_type_id_size()
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: Fix oops when removing custom query handlers
When removing custom query handlers, the handler might still
be used inside the EC query workqueue, causing a kernel oops
if the module holding the callback function was already unloaded.
Fix this by flushing the EC query workqueue when removing
custom query handlers.
Tested on a Acer Travelmate 4002WLMi |
| A flaw was found in the Ansible aap-gateway. Cross-site request forgery (CSRF) origin checking is not done on requests from the gateway to external components, such as the controller, hub, and eda. |
| A multi-vendor cache poisoning vulnerability named 'Rebirthday Attack' has been discovered in caching resolvers that support EDNS Client Subnet (ECS). Unbound is also vulnerable when compiled with ECS support, i.e., '--enable-subnet', AND configured to send ECS information along with queries to upstream name servers, i.e., at least one of the 'send-client-subnet', 'client-subnet-zone' or 'client-subnet-always-forward' options is used. Resolvers supporting ECS need to segregate outgoing queries to accommodate for different outgoing ECS information. This re-opens up resolvers to a birthday paradox attack (Rebirthday Attack) that tries to match the DNS transaction ID in order to cache non-ECS poisonous replies. |
| In the Linux kernel, the following vulnerability has been resolved:
rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle()
The rcuscale.holdoff module parameter can be used to delay the start
of rcu_scale_writer() kthread. However, the hung-task timeout will
trigger when the timeout specified by rcuscale.holdoff is greater than
hung_task_timeout_secs:
runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M"
bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300"
[ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds.
[ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7
[ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000
[ 247.075346] Call Trace:
[ 247.075660] <TASK>
[ 247.075965] __schedule+0x635/0x1280
[ 247.076448] ? __pfx___schedule+0x10/0x10
[ 247.076967] ? schedule_timeout+0x2dc/0x4d0
[ 247.077471] ? __pfx_lock_release+0x10/0x10
[ 247.078018] ? enqueue_timer+0xe2/0x220
[ 247.078522] schedule+0x84/0x120
[ 247.078957] schedule_timeout+0x2e1/0x4d0
[ 247.079447] ? __pfx_schedule_timeout+0x10/0x10
[ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.080591] ? __pfx_process_timeout+0x10/0x10
[ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10
[ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.082287] rcu_scale_writer+0x6b1/0x7f0
[ 247.082773] ? mark_held_locks+0x29/0xa0
[ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.084412] kthread+0x179/0x1c0
[ 247.084759] ? __pfx_kthread+0x10/0x10
[ 247.085098] ret_from_fork+0x2c/0x50
[ 247.085433] </TASK>
This commit therefore replaces schedule_timeout_uninterruptible() with
schedule_timeout_idle(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add check for kmemdup
Since the kmemdup may return NULL pointer,
it should be better to add check for the return value
in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Only send -ENOTCONN status if client driver is available
For the STOP and RESET commands, only send the channel disconnect status
-ENOTCONN if client driver is available. Otherwise, it will result in
null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
My previous commit introduced a memory leak where the item allocated
from tlmi_setting was not freed.
This commit also renames it to avoid confusion with the similarly name
variable in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
sh: dma: Fix DMA channel offset calculation
Various SoCs of the SH3, SH4 and SH4A family, which use this driver,
feature a differing number of DMA channels, which can be distributed
between up to two DMAC modules. The existing implementation fails to
correctly accommodate for all those variations, resulting in wrong
channel offset calculations and leading to kernel panics.
Rewrite dma_base_addr() in order to properly calculate channel offsets
in a DMAC module. Fix dmaor_read_reg() and dmaor_write_reg(), so that
the correct DMAC module base is selected for the DMAOR register. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP
Fixes OOPS on boards with ANX9805 DP encoders. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/sysv: Null check to prevent null-ptr-deref bug
sb_getblk(inode->i_sb, parent) return a null ptr and taking lock on
that leads to the null-ptr-deref bug. |
| Happy DOM is a JavaScript implementation of a web browser without its graphical user interface. Happy DOM v19 and lower contains a security vulnerability that puts the owner system at the risk of RCE (Remote Code Execution) attacks. A Node.js VM Context is not an isolated environment, and if the user runs untrusted JavaScript code within the Happy DOM VM Context, it may escape the VM and get access to process level functionality. It seems like what the attacker can get control over depends on if the process is using ESM or CommonJS. With CommonJS the attacker can get hold of the `require()` function to import modules. Happy DOM has JavaScript evaluation enabled by default. This may not be obvious to the consumer of Happy DOM and can potentially put the user at risk if untrusted code is executed within the environment. Version 20.0.0 patches the issue by changing JavaScript evaluation to be disabled by default. |
| Home Assistant is open source home automation software that puts local control and privacy first. In versions 2025.1.0 through 2025.10.1, the energy dashboard is vulnerable to stored cross-site scripting. An authenticated user can inject malicious JavaScript code into an energy entity's name field, which is then executed when any user hovers over data points in the energy dashboard graph tooltips. The vulnerability exists because entity names containing HTML are not properly sanitized before being rendered in graph tooltips. This could allow an attacker with authentication to execute arbitrary JavaScript in the context of other users' sessions. Additionally, if an energy provider (such as Tibber) supplies a malicious default name for an entity, the vulnerability can be exploited without direct user action when the default name is used. This issue has been patched in version 2025.10.2. No known workarounds exist. |
| In versions before 20.0.2, it was found that --disallow-code-generation-from-strings is not sufficient for isolating untrusted JavaScript in happy-dom. The untrusted script and the rest of the application still run in the same Isolate/process, so attackers can deploy prototype pollution payloads to hijack important references like "process" in the example below, or to hijack control flow via flipping checks of undefined property. This vulnerability is due to an incomplete fix for CVE-2025-61927. The vulnerability is fixed in 20.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow
This reverts commit
443a98e649b4 ("soundwire: bus: use pm_runtime_resume_and_get()")
Change calls to pm_runtime_resume_and_get() back to pm_runtime_get_sync().
This fixes a usage count underrun caused by doing a pm_runtime_put() even
though pm_runtime_resume_and_get() returned an error.
The three affected functions ignore -EACCES error from trying to get
pm_runtime, and carry on, including a put at the end of the function.
But pm_runtime_resume_and_get() does not increment the usage count if it
returns an error. So in the -EACCES case you must not call
pm_runtime_put().
The documentation for pm_runtime_get_sync() says:
"Consider using pm_runtime_resume_and_get() ... as this is likely to
result in cleaner code."
In this case I don't think it results in cleaner code because the
pm_runtime_put() at the end of the function would have to be conditional on
the return value from pm_runtime_resume_and_get() at the top of the
function.
pm_runtime_get_sync() doesn't have this problem because it always
increments the count, so always needs a put. The code can just flow through
and do the pm_runtime_put() unconditionally. |
