| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was detected in nocobase up to 1.9.4/2.0.0-alpha.37. The affected element is an unknown function of the file nocobase\packages\core\auth\src\base\jwt-service.ts of the component JWT Service. The manipulation of the argument API_KEY results in use of hard-coded cryptographic key
. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is described as difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Symantec Endpoint Protection, prior to 14.3 RU10 Patch 1, RU9 Patch 2, and RU8 Patch 3, may be susceptible to a Elevation of Privilege vulnerability, which is a type of issue whereby an attacker may attempt to compromise the software application to gain elevated access to resources that are normally protected from an application or user. |
| MCUboot is a secure bootloader for 32-bits microcontrollers. MCUboot uses a TLV (tag-length-value) structure to represent the meta data associated with an image. The TLVs themselves are divided into two sections, a protected and an unprotected section. The protected TLV entries are included as part of the image signature to avoid tampering. However, the code does not distinguish which TLV entries should be protected or not, so it is possible for an attacker to add unprotected TLV entries that should be protected. Currently, the primary protected TLV entries should be the dependency indication, and the boot record. An injected dependency value would primarily result in an otherwise acceptable image being rejected. A boot record injection could allow fields in a later attestation record to include data not intended, which could cause an image to appear to have properties that it should not have. As a workaround, disable the boot record functionality. |
| A double free vulnerability was found in QEMU virtio devices (virtio-gpu, virtio-serial-bus, virtio-crypto), where the mem_reentrancy_guard flag insufficiently protects against DMA reentrancy issues. This issue could allow a malicious privileged guest user to crash the QEMU process on the host, resulting in a denial of service or allow arbitrary code execution within the context of the QEMU process on the host. |
| Aztech DSL5005EN firmware 1.00.AZ_2013-05-10 and possibly other versions allows unauthenticated attackers to change the administrator password via a crafted POST request to sysAccess.asp. This allows full administrative control of the router without authentication. |
| A vulnerability was found in TBK DVR-4104 and DVR-4216 up to 20240412 and classified as critical. This issue affects some unknown processing of the file /device.rsp?opt=sys&cmd=___S_O_S_T_R_E_A_MAX___. The manipulation of the argument mdb/mdc leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260573 was assigned to this vulnerability. |
| A vulnerability exists in the Rockwell Automation Verve Asset Manager due to insufficient variable sanitizing. A portion of the administrative web interface for Verve's Legacy Agentless Device Inventory (ADI) capability (deprecated since the 1.36 release) allows users to change a variable with inadequate sanitizing. If exploited, it could allow a threat actor with administrative access to run arbitrary commands in the context of the container running the service. |
| SiteGuard WP Plugin provides a functionality to customize the path to the login page wp-login.php and implements a measure to avoid redirection from other URLs. However, SiteGuard WP Plugin versions prior to 1.7.7 missed to implement a measure to avoid redirection from wp-register.php. As a result, the customized path to the login page may be exposed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix decoder disable pm crash
Can't call pm_runtime_disable when the architecture support sub device for
'dev->pm.dev' is NUll, or will get below crash log.
[ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0
[ 10.771556] lr : __pm_runtime_disable+0x30/0x130
[ 10.771558] sp : ffffffc01e4cb800
[ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8
[ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0
[ 10.771567] x25: 0000000000000002 x24: 0000000000000002
[ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001
[ 10.771573] x21: 0000000000000001 x20: 0000000000000000
[ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18
[ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74
[ 10.771583] x15: 00000000000002ea x14: 0000000000000058
[ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4
[ 10.771590] x11: 0000000000000000 x10: 0000000000000001
[ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4
[ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000
[ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001
[ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001
[ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4
[ 10.771613] Call trace:
[ 10.771617] _raw_spin_lock_irq+0x4c/0xa0
[ 10.771620] __pm_runtime_disable+0x30/0x130
[ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc]
[ 10.771662] platform_drv_probe+0x9c/0xbc
[ 10.771665] really_probe+0x13c/0x3a0
[ 10.771668] driver_probe_device+0x84/0xc0
[ 10.771671] device_driver_attach+0x54/0x78 |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: zynq: Fix refcount leak in zynq_early_slcr_init
of_find_compatible_node() returns a node pointer with refcount incremented,
we should use of_node_put() on error path.
Add missing of_node_put() to avoid refcount leak. |
| When frontend.enableExecuteMultiOperation is enabled, the server can apply namespace-scoped validation and feature gates for the embedded StartWorkflowExecutionRequest using its Namespace field rather than the outer, authorized ExecuteMultiOperationRequest.Namespace. This allows a caller authorized for one namespace to bypass that namespace's limits/policies by setting the embedded start request's namespace to a different namespace. The workflow is still created in the outer (authorized) namespace; only validation/gating is performed under the wrong namespace context.
This issue affects Temporal: from 1.24.0 through 1.29.1. Fixed in 1.27.4, 1.28.2, 1.29.2. |
| When system.enableCrossNamespaceCommands is enabled (on by default), the Temporal server permits certain workflow task commands (e.g. StartChildWorkflowExecution, SignalExternalWorkflowExecution, RequestCancelExternalWorkflowExecution) to target a different namespace than the namespace authorized at the gRPC boundary. The frontend authorizes RespondWorkflowTaskCompleted based on the outer request namespace, but the history service later resolves and executes the command using the namespace embedded in command attributes without authorizing the caller for that target namespace. This can allow a worker authorized for one namespace to create, signal, or cancel workflows in another namespace.
This issue affects Temporal: through 1.29.1. Fixed in 1.27.4, 1.28.2, 1.29.2. |
| An authentication bypass vulnerability exists in the User profile management functionality of Socomec Easy Config System 2.6.1.0. A specially crafted database record can lead to unauthorized access. An attacker can modify a local database to trigger this vulnerability. |
| find-my-way is a fast, open source HTTP router, internally using a Radix Tree (aka compact Prefix Tree), supports route params, wildcards, and it's framework independent. A bad regular expression is generated any time one has two parameters within a single segment, when adding a `-` at the end, like `/:a-:b-`. This may cause a denial of service in some instances. Users are advised to update to find-my-way v8.2.2 or v9.0.1. or subsequent versions. There are no known workarounds for this issue. |
| A vulnerability was discovered in KM08-708H-v1.1, There is a buffer overflow in the sub_445BDC() function within the /usr/sbin/goahead program; The strcpy function is executed without checking the length of the string, leading to a buffer overflow. |
| Dzmitry Lukyanenka, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API param.cgi was vulnerable to a race condition attack allowing for an attacker to block access to the web interface of the Axis device. Other API endpoints or services not making use of param.cgi are not affected.
Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| Cobbler, a Linux installation server that allows for rapid setup of network installation environments, has an improper authentication vulnerability starting in version 3.0.0 and prior to versions 3.2.3 and 3.3.7. `utils.get_shared_secret()` always returns `-1`, which allows anyone to connect to cobbler XML-RPC as user `''` password `-1` and make any changes. This gives anyone with network access to a cobbler server full control of the server. Versions 3.2.3 and 3.3.7 fix the issue. |
| Missing Origin Validation in WebSockets vulnerability in FLXEON. Session management was not sufficient to prevent unauthorized HTTPS requests. This issue affects FLXEON: through <= 9.3.4. |
| Insertion of Sensitive Information into Log File vulnerability observed in FLEXON. Some information may be improperly disclosed through https access.
This issue affects FLXEON through <= 9.3.4. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a bundle provides a invalid signature for a checkpoint. This bug impacts clients using any variation of KeylessVerifier.verify(). Currently checkpoints are only used to ensure the root hash of an inclusion proof was provided by the log in question. Failing to validate that means a bundle may provide an inclusion proof that doesn't actually correspond to the log in question. This may eventually lead a monitor/witness being unable to detect when a compromised logs are providing different views of themselves to different clients. There are other mechanisms right now that mitigate this, such as the signed entry timestamp. Sigstore-java currently requires a valid signed entry timestamp. By correctly verifying the signed entry timestamp we can make certain assertions about the log signing the log entry (like the log was aware of the artifact signing event and signed it). Therefore the impact on clients that are not monitors/witnesses is very low. This vulnerability is fixed in 1.2.0. |
