| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Bugsink is a self-hosted error tracking service. In versions 1.4.2 and below, 1.5.0 through 1.5.4, 1.6.0 through 1.6.3, and 1.7.0 through 1.7.3, ingestion paths construct file locations directly from untrusted event_id input without validation. A specially crafted event_id can result in paths outside the intended directory, potentially allowing file overwrite or creation in arbitrary locations. Submitting such input requires access to a valid DSN, potentially exposing them. If Bugsink runs in a container, the effect is confined to the container’s filesystem. In non-containerized setups, the overwrite may affect other parts of the system accessible to that user. This is fixed in versions 1.4.3, 1.5.5, 1.6.4 and 1.7.4. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
On completion of i915_vma_pin_ww(), a synchronous variant of
dma_fence_work_commit() is called. When pinning a VMA to GGTT address
space on a Cherry View family processor, or on a Broxton generation SoC
with VTD enabled, i.e., when stop_machine() is then called from
intel_ggtt_bind_vma(), that can potentially lead to lock inversion among
reservation_ww and cpu_hotplug locks.
[86.861179] ======================================================
[86.861193] WARNING: possible circular locking dependency detected
[86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U
[86.861226] ------------------------------------------------------
[86.861238] i915_module_loa/1432 is trying to acquire lock:
[86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50
[86.861290]
but task is already holding lock:
[86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915]
[86.862233]
which lock already depends on the new lock.
[86.862251]
the existing dependency chain (in reverse order) is:
[86.862265]
-> #5 (reservation_ww_class_mutex){+.+.}-{3:3}:
[86.862292] dma_resv_lockdep+0x19a/0x390
[86.862315] do_one_initcall+0x60/0x3f0
[86.862334] kernel_init_freeable+0x3cd/0x680
[86.862353] kernel_init+0x1b/0x200
[86.862369] ret_from_fork+0x47/0x70
[86.862383] ret_from_fork_asm+0x1a/0x30
[86.862399]
-> #4 (reservation_ww_class_acquire){+.+.}-{0:0}:
[86.862425] dma_resv_lockdep+0x178/0x390
[86.862440] do_one_initcall+0x60/0x3f0
[86.862454] kernel_init_freeable+0x3cd/0x680
[86.862470] kernel_init+0x1b/0x200
[86.862482] ret_from_fork+0x47/0x70
[86.862495] ret_from_fork_asm+0x1a/0x30
[86.862509]
-> #3 (&mm->mmap_lock){++++}-{3:3}:
[86.862531] down_read_killable+0x46/0x1e0
[86.862546] lock_mm_and_find_vma+0xa2/0x280
[86.862561] do_user_addr_fault+0x266/0x8e0
[86.862578] exc_page_fault+0x8a/0x2f0
[86.862593] asm_exc_page_fault+0x27/0x30
[86.862607] filldir64+0xeb/0x180
[86.862620] kernfs_fop_readdir+0x118/0x480
[86.862635] iterate_dir+0xcf/0x2b0
[86.862648] __x64_sys_getdents64+0x84/0x140
[86.862661] x64_sys_call+0x1058/0x2660
[86.862675] do_syscall_64+0x91/0xe90
[86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[86.862703]
-> #2 (&root->kernfs_rwsem){++++}-{3:3}:
[86.862725] down_write+0x3e/0xf0
[86.862738] kernfs_add_one+0x30/0x3c0
[86.862751] kernfs_create_dir_ns+0x53/0xb0
[86.862765] internal_create_group+0x134/0x4c0
[86.862779] sysfs_create_group+0x13/0x20
[86.862792] topology_add_dev+0x1d/0x30
[86.862806] cpuhp_invoke_callback+0x4b5/0x850
[86.862822] cpuhp_issue_call+0xbf/0x1f0
[86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320
[86.862852] __cpuhp_setup_state+0xb0/0x220
[86.862866] topology_sysfs_init+0x30/0x50
[86.862879] do_one_initcall+0x60/0x3f0
[86.862893] kernel_init_freeable+0x3cd/0x680
[86.862908] kernel_init+0x1b/0x200
[86.862921] ret_from_fork+0x47/0x70
[86.862934] ret_from_fork_asm+0x1a/0x30
[86.862947]
-> #1 (cpuhp_state_mutex){+.+.}-{3:3}:
[86.862969] __mutex_lock+0xaa/0xed0
[86.862982] mutex_lock_nested+0x1b/0x30
[86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320
[86.863012] __cpuhp_setup_state+0xb0/0x220
[86.863026] page_alloc_init_cpuhp+0x2d/0x60
[86.863041] mm_core_init+0x22/0x2d0
[86.863054] start_kernel+0x576/0xbd0
[86.863068] x86_64_start_reservations+0x18/0x30
[86.863084] x86_64_start_kernel+0xbf/0x110
[86.863098] common_startup_64+0x13e/0x141
[86.863114]
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
[86.863135] __lock_acquire+0x16
---truncated--- |
| Cognex In-Sight Explorer and In-Sight Camera Firmware expose
a telnet-based service
on port 23 to allow management operations such as firmware upgrades and
device reboots, which require authentication. A user with protected
privileges can successfully invoke the SetSerialPort functionality to
modify relevant device properties (such as serial interface settings),
contradicting the security model proposed in the user manual. |
| The Secure Flag passed to Versal™ Adaptive SoC’s Trusted Firmware for Cortex®-A processors (TF-A) for Arm’s Power State Coordination Interface (PSCI) commands were incorrectly set to secure instead of using the processor’s actual security state. This would allow the PSCI requests to appear they were from processors in the secure state instead of the non-secure state. |
| Cross-Site Request Forgery (CSRF) vulnerability in loopus WP Attractive Donations System - Easy Stripe & Paypal donations WP_AttractiveDonationsSystem allows Cross Site Request Forgery.This issue affects WP Attractive Donations System - Easy Stripe & Paypal donations: from n/a through <= 1.25. |
| An attacker with adjacent access, without authentication, can exploit
this vulnerability to retrieve a hard-coded password embedded in
publicly available software. This password can then be used to decrypt
sensitive network traffic, affecting the Cognex device. |
| Path Traversal: '.../...//' vulnerability in WordPress.org Health Check & Troubleshooting health-check allows Path Traversal.This issue affects Health Check & Troubleshooting: from n/a through <= 1.7.1. |
| Missing Authorization vulnerability in emarket-design Request a Quote request-a-quote allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Request a Quote: from n/a through <= 2.5.3. |
| Cognex In-Sight Explorer and In-Sight Camera Firmware expose
a proprietary protocol on TCP port 1069 to perform management operations
such as modifying system properties. The user management functionality
handles sensitive data such as registered usernames and passwords over
an unencrypted channel, allowing an adjacent attacker to intercept valid
credentials to gain access to the device. |
| Soft Serve is a self-hostable Git server for the command line. In versions prior to 0.10.0, there are several places where the user can insert data (e.g. names) and ANSI escape sequences are not being removed, which can then be used, for example, to show fake alerts. In the same token, git messages, when printed, are also not being sanitized. This issue is fixed in version 0.10.0. |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in colabrio Norebro Extra norebro-extra allows Code Injection.This issue affects Norebro Extra: from n/a through <= 1.6.8. |
| Cognex In-Sight Explorer and In-Sight Camera Firmware expose
a proprietary protocol on TCP port 1069 to perform management operations
such as modifying system properties. The user management functionality
handles sensitive data such as registered usernames and passwords over
an unencrypted channel, allowing an adjacent attacker to intercept valid
credentials to gain access to the device. |
| PLANKA 2.0.0 lacks X-Frame-Options and CSP frame-ancestors headers, allowing the application to be embedded within malicious iframes. While this does not lead to unintended modification of projects or tasks, it exposes users to Phishing attacks. Attackers can frame the legitimate Planka application on a malicious site to establish false trust (UI Redressing), potentially tricking users into entering sensitive information or credentials into overlaid fake forms. NOTE: this is disputed by the Supplier because "PLANKA uses SameSite=Strict cookies, preventing authentication in cross-origin contexts. No session can be established. No credential interception or unauthorized actions are possible. Browser Same-Origin Policy prevents the parent page from accessing iframe content. Clickjacking is not applicable on the login page. Any credential capture would require attacker-controlled input and user interaction equivalent to phishing. The security outcome depends entirely on the user's trust in the parent page. An attacker can achieve the same effect with a fully fake login page. Embedding the legitimate page adds no risk, as browsers do not show URL, certificate, or padlock indicators in cross-origin iframes." |
| Missing Authorization vulnerability in wppochipp Pochipp pochipp allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Pochipp: from n/a through <= 1.18.0. |
| Cognex In-Sight Explorer and In-Sight Camera Firmware expose a telnet-based service on port 23 in order to allow
management operations on the device such as firmware upgrades and device
reboot requiring an authentication. A wrong management of login
failures of the service allows a denial-of-service attack, leaving the telnet service
into an unreachable state. |
| Missing Authorization vulnerability in merkulove Masker for Elementor masker-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Masker for Elementor: from n/a through <= 1.1.4. |
| Missing Authorization vulnerability in merkulove Lottier for WPBakery lottier-wpbakery allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Lottier for WPBakery: from n/a through <= 1.1.7. |
| Missing Authorization vulnerability in merkulove Lottier lottier-gutenberg allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Lottier: from n/a through <= 1.1.1. |
| Stack-based buffer overflow vulnerability exists in SEIKO EPSON Web Config. Specially crafted data input by a logged-in user may execute arbitrary code. As for the details of the affected products and versions, see the information provided by the vendor under [References]. |
| A flaw in Node.js's buffer allocation logic can expose uninitialized memory when allocations are interrupted, when using the `vm` module with the timeout option. Under specific timing conditions, buffers allocated with `Buffer.alloc` and other `TypedArray` instances like `Uint8Array` may contain leftover data from previous operations, allowing in-process secrets like tokens or passwords to leak or causing data corruption. While exploitation typically requires precise timing or in-process code execution, it can become remotely exploitable when untrusted input influences workload and timeouts, leading to potential confidentiality and integrity impact. |
