| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Net::CIDR::Lite module before 0.22 for Perl does not properly consider extraneous zero characters at the beginning of an IP address string, which (in some situations) allows attackers to bypass access control that is based on IP addresses. |
| The Net::IPV4Addr module 0.10 for Perl does not properly consider extraneous zero characters in an IP address string, which (in some situations) allows attackers to bypass access control that is based on IP addresses. |
| The Net::IPAddress::Util module before 5.000 for Perl does not properly consider extraneous zero characters in an IP address string, which (in some situations) allows attackers to bypass access control that is based on IP addresses. |
| The Kossy module before 0.60 for Perl allows JSON hijacking because of X-Requested-With mishandling. |
| In the Linux kernel, the following vulnerability has been resolved:
vmci_host: fix a race condition in vmci_host_poll() causing GPF
During fuzzing, a general protection fault is observed in
vmci_host_poll().
general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf]
RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926
<- omitting registers ->
Call Trace:
<TASK>
lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162
add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22
poll_wait include/linux/poll.h:49 [inline]
vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x2cc/0x330 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Example thread interleaving that causes the general protection fault
is as follows:
CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context)
----- -----
// Read uninitialized context
context = vmci_host_dev->context;
// Initialize context
vmci_host_dev->context = vmci_ctx_create();
vmci_host_dev->ct_type = VMCIOBJ_CONTEXT;
if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) {
// Dereferencing the wrong pointer
poll_wait(..., &context->host_context);
}
In this scenario, vmci_host_poll() reads vmci_host_dev->context first,
and then reads vmci_host_dev->ct_type to check that
vmci_host_dev->context is initialized. However, since these two reads
are not atomically executed, there is a chance of a race condition as
described above.
To fix this race condition, read vmci_host_dev->context after checking
the value of vmci_host_dev->ct_type so that vmci_host_poll() always
reads an initialized context. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path
The cdns_i2c_master_xfer() function gets a runtime PM reference when the
function is entered. This reference is released when the function is
exited. There is currently one error path where the function exits
directly, which leads to a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4
ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause
null pointer dereference later. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix an issue found by KASAN
Write only correct size (32 instead of 64 bytes). |
| An issue in wanEditor v4.7.11 and fixed in v.4.7.12 and v.5 was discovered to contain a cross-site scripting (XSS) vulnerability via the image upload function. |
| wanEditor v4.7.11 was discovered to contain a cross-site scripting (XSS) vulnerability via the video upload function. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
If clk_hw_register() fails, the corresponding clk should not be
unregistered.
To handle errors from loops, clean up partial iterations before doing the
goto. So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section. |
| The T-Soft E-Commerce 4 web application is susceptible to SQL injection (SQLi) attacks when authenticated as an admin or privileged user. This vulnerability allows attackers to access and manipulate the database through crafted requests. By exploiting this flaw, attackers can bypass authentication mechanisms, view sensitive information stored in the database, and potentially exfiltrate data. |
| An issue was discovered on certain Nuki Home Solutions devices. There is a buffer overflow over the encrypted token parsing logic in the HTTP service that allows remote code execution. This affects Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2. |
| An issue was discovered on certain Nuki Home Solutions devices. An attacker with physical access to this JTAG port may be able to connect to the device and bypass both hardware and software security protections. This affects Nuki Keypad before 1.9.2 and Nuki Fob before 1.8.1. |
| An issue was discovered on certain Nuki Home Solutions devices. The code used to parse the JSON objects received from the WebSocket service provided by the device leads to a stack buffer overflow. An attacker would be able to exploit this to gain arbitrary code execution on a KeyTurner device. This affects Nuki Smart Lock 3.0 before 3.3.5 and 2.0 before 2.12.4, as well as Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2. |
| An issue was discovered on certain Nuki Home Solutions devices. It is possible to send multiple BLE malformed packets to block some of the functionality and reboot the device. This affects Nuki Smart Lock 3.0 before 3.3.5 and Nuki Smart Lock 2.0 before 2.12.4. |
| An issue was discovered on certain Nuki Home Solutions devices. An attacker with physical access to the circuit board could use the SWD debug features to control the execution of code on the processor and debug the firmware, as well as read or alter the content of the internal and external flash memory. This affects Nuki Smart Lock 3.0 before 3.3.5, Nuki Smart Lock 2.0 before 2.12.4, as well as Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2. |
| An issue was discovered on certain Nuki Home Solutions devices. Some BLE commands, which should have been designed to be only called from privileged accounts, could also be called from unprivileged accounts. This demonstrates that no access controls were implemented for the different BLE commands across the different accounts. This affects Nuki Smart Lock 3.0 before 3.3.5 and Nuki Smart Lock 2.0 before 2.12.4. |
| An issue was discovered on certain Nuki Home Solutions devices. By sending a malformed HTTP verb, it is possible to force a reboot of the device. This affects Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2. |
| An issue was discovered on certain Nuki Home Solutions devices. Lack of certificate validation on HTTP communications allows attackers to intercept and tamper data. This affects Nuki Smart Lock 3.0 before 3.3.5, Nuki Bridge v1 before 1.22.0 and Nuki Bridge v2 before 2.13.2. |
