| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in saltbo zpan up to 1.6.5/1.7.0-beta2. It has been rated as problematic. This issue affects the function NewToken of the file zpan/internal/app/service/token.go of the component JSON Web Token Handler. The manipulation with the input 123 leads to use of hard-coded password. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. |
| A vulnerability was determined in cmake 4.1.20250725-gb5cce23. This affects the function cmForEachFunctionBlocker::ReplayItems of the file cmForEachCommand.cxx. This manipulation causes reachable assertion. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. Patch name: 37e27f71bc356d880c908040cd0cb68fa2c371b8. It is suggested to install a patch to address this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
atm/fore200e: Fix possible data race in fore200e_open()
Protect access to fore200e->available_cell_rate with rate_mtx lock in the
error handling path of fore200e_open() to prevent a data race.
The field fore200e->available_cell_rate is a shared resource used to track
available bandwidth. It is concurrently accessed by fore200e_open(),
fore200e_close(), and fore200e_change_qos().
In fore200e_open(), the lock rate_mtx is correctly held when subtracting
vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth.
However, if the subsequent call to fore200e_activate_vcin() fails, the
function restores the reserved bandwidth by adding back to
available_cell_rate without holding the lock.
This introduces a race condition because available_cell_rate is a global
device resource shared across all VCCs. If the error path in
fore200e_open() executes concurrently with operations like
fore200e_close() or fore200e_change_qos() on other VCCs, a
read-modify-write race occurs.
Specifically, the error path reads the rate without the lock. If another
CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in
fore200e_close()) between this read and the subsequent write, the error
path will overwrite the concurrent update with a stale value. This results
in incorrect bandwidth accounting. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing data
The URB received in gs_usb_receive_bulk_callback() contains a struct
gs_host_frame. The length of the data after the header depends on the
gs_host_frame hf::flags and the active device features (e.g. time
stamping).
Introduce a new function gs_usb_get_minimum_length() and check that we have
at least received the required amount of data before accessing it. Only
copy the data to that skb that has actually been received.
[mkl: rename gs_usb_get_minimum_length() -> +gs_usb_get_minimum_rx_length()] |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing header
The driver expects to receive a struct gs_host_frame in
gs_usb_receive_bulk_callback().
Use struct_group to describe the header of the struct gs_host_frame and
check that we have at least received the header before accessing any
members of it.
To resubmit the URB, do not dereference the pointer chain
"dev->parent->hf_size_rx" but use "parent->hf_size_rx" instead. Since
"urb->context" contains "parent", it is always defined, while "dev" is not
defined if the URB it too short. |
| Conduit is a chat server powered by Matrix. A vulnerability that affects a number of Conduit-derived homeservers allows a remote, unauthenticated attacker to force the target server to cryptographically sign arbitrary membership events. Affected products include Conduit prior to version 0.10.10, continuwuity prior to version 0.5.0, Grapevine prior to commit `9a50c244`, and tuwunel prior to version 1.4.8. The flaw exists because the server fails to validate the origin of a signing request, provided the event's state_key is a valid user ID belonging to the target server. Attackers can forge "leave" events for any user on the target server. This forcibly removes users (including admins and bots) from rooms. This allows denial of service and/or the removal of technical protections for a room (including policy servers, if all users on the policy server are removed). Attackers can forge "invite" events from a victim user to themselves, provided they have an account on a server where there is an account that has the power level to send invites. This allows the attacker to join private or invite-only rooms accessible by the victim, exposing confidential conversation history and room state. Attackers can forge "ban" events from a victim user to any user below the victim user's power level, provided the victim has the power level to issue bans AND the target of the ban resides on the same server as the victim. This allows the attacker to ban anyone in a room who is on the same server as the vulnerable one, however cannot exploit this to ban users on other servers or the victim themself. Conduit fixes the issue in version 0.10.10. continuwuity fixes the issue in commits `7fa4fa98` and `b2bead67`, released in 0.5.0. tuwunel fixes the issue in commit `dc9314de1f8a6e040c5aa331fe52efbe62e6a2c3`, released in 1.4.8. Grapevine fixes the issue in commit `9a50c2448abba6e2b7d79c64243bb438b351616c`. As a workaround, block access to the `PUT /_matrix/federation/v2/invite/{roomId}/{eventId}` endpoint using your reverse proxy. |
| ArduinoCore-avr contains the source code and configuration files of the Arduino AVR Boards platform. A vulnerability in versions prior to 1.8.7 allows an attacker to trigger a stack-based buffer overflow when converting floating-point values to strings with high precision. By passing very large `decimalPlaces` values to the affected String constructors or concat methods, the `dtostrf` function writes beyond fixed-size stack buffers, causing memory corruption and denial of service. Under specific conditions, this could enable arbitrary code execution on AVR-based Arduino boards.
### Patches
- The Fix is included starting from the `1.8.7` release available from the following link [ArduinoCore-avr v1.8.7](https://github.com/arduino/ArduinoCore-avr)
- The Fixing Commit is available at the following link [1a6a417f89c8901dad646efce74ae9d3ddebfd59](https://github.com/arduino/ArduinoCore-avr/pull/613/commits/1a6a417f89c8901dad646efce74ae9d3ddebfd59)
### References
- [ASEC-26-001 ArduinoCore-avr vXXXX Resolves Buffer Overflow Vulnerability](https://support.arduino.cc/hc/en-us/articles/XXXXX)
### Credits
- Maxime Rossi Bellom and Ramtine Tofighi Shirazi from SecMate (https://secmate.dev/) |
| Buffer Overflow vulnerability in CDATA FD614GS3-R850 V3.2.7_P161006 (Build.0333.250211) allows an attacker to execute arbitrary code via the node_mac, node_opt, opt_param, and domainblk parameters of the mesh_node_config and domiainblk_config modules |
| A vulnerability was found in Eastnets PaymentSafe 2.5.26.0. It has been classified as problematic. This affects an unknown part of the component BIC Search. The manipulation leads to cross site scripting. It is possible to initiate the attack remotely. Upgrading to version 2.5.27.0 is able to address this issue. |
| The Service Layer in SAP Business One, allows attackers to potentially gain unauthorized access and impersonate other users in the application to perform unauthorized actions. Due to the improper session management, the attackers can elevate themselves to higher privilege and can read, modify and/or write new data. To gain authenticated sessions of other users, the attacker must invest considerable time and effort. This vulnerability has a high impact on the confidentiality and integrity of the application with no effect on the availability of the application. |
| Improper Privilege Management vulnerability in ZTE GoldenDB allows Privilege Escalation.This issue affects GoldenDB: from 6.1.03 through 6.1.03.05. |
| There is a cross-site scripting vulnerability in the Secure
Access administrative console of Absolute Secure Access prior to version 13.53.
Attackers with system administrator permissions can interfere with another
system administrator’s use of the management console when the second
administrator logs in. Attack complexity is high, attack requirements are
present, privileges required are none, user interaction is required. The impact
to confidentiality is low, the impact to availability is none, and the impact
to system integrity is none. |
| The Simpler Checkout plugin for WordPress is vulnerable to Authentication Bypass in versions 0.7.0 to 1.1.9. This is due to the plugin not properly verifying a user's identity prior to logging them in as an admin through the simplerwc_woocommerce_order_created() function. This makes it possible for unauthenticated attackers to log in as other users based on their order ID, which can be an administrator if a site admin has placed a test order. |
| The anti-theft protection mechanism can be bypassed by attackers due to weak response generation algorithms for the head unit. It is possible to reveal all 32 corresponding responses by sniffing CAN traffic or by pre-calculating the values, which allow to bypass the protection.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| The Infotainment ECU manufactured by Bosch which is installed in Nissan Leaf ZE1 – 2020 uses a Redbend service for over-the-air provisioning and updates. HTTPS is used for communication with the back-end server. Due to usage of the default configuration for the underlying SSL engine, the server root certificate is not verified. As a result, an attacker may be able to impersonate a Redbend backend server using a self-signed certificate.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| Multiple payment terminal versions contain non-persistent cross-site scripting vulnerabilities in billing and payment information input fields. Attackers can inject malicious script code through vulnerable parameters to manipulate client-side requests and potentially execute session hijacking or phishing attacks. |
| An integer underflow in the image processing binary of the MIB3 infotainment unit allows an attacker with local access to the vehicle to cause denial-of-service of the infotainment system.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| A logic flaw leading to a RAM buffer overflow in the bootloader component of the MIB3 infotainment unit allows an attacker with physical access to the MIB3 ECU to bypass firmware signature verification and run arbitrary code in the infotainment system at boot process. |
| A heap buffer overflow in the image processing binary of the MIB3 infotainment unit allows an attacker to execute arbitrary code on it.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| A command injection in the networking service of the MIB3 infotainment allows an attacker already presenting in the system to escalate privileges and obtain administrative access to the system.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
