| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zincati is an auto-update agent for Fedora CoreOS hosts. Zincati ships a polkit rule which allows the `zincati` system user to use the actions `org.projectatomic.rpmostree1.deploy` to deploy updates to the system and `org.projectatomic.rpmostree1.finalize-deployment` to reboot the system into the deployed update. Since Zincati v0.0.24, this polkit rule contains a logic error which broadens access of those polkit actions to any unprivileged user rather than just the `zincati` system user. In practice, this means that any unprivileged user with access to the system D-Bus socket is able to deploy older Fedora CoreOS versions (which may have other known vulnerabilities). Note that rpm-ostree enforces that the selected version must be from the same branch the system is currently on so this cannot directly be used to deploy an attacker-controlled update payload. This primarily impacts users running untrusted workloads with access to the system D-Bus socket. Note that in general, untrusted workloads should not be given this access, whether containerized or not. By default, containers do not have access to the system D-Bus socket. The logic error is fixed in Zincati v0.0.30. A workaround is to manually add a following polkit rule, instructions for which are available in the GitHub Security Advisory. |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. Baremetal Operator enables users to load Secret from arbitrary namespaces upon deployment of the namespace scoped Custom Resource `BMCEventSubscription`. Prior to versions 0.8.1 and 0.9.1, an adversary Kubernetes account with only namespace level roles (e.g. a tenant controlling a namespace) may create a `BMCEventSubscription` in his authorized namespace and then load Secrets from his unauthorized namespaces to his authorized namespace via the Baremetal Operator, causing Secret Leakage. The patch makes BMO refuse to read Secrets from other namespace than where the corresponding BMH resource is. The patch does not change the `BMCEventSubscription` API in BMO, but stricter validation will fail the request at admission time. It will also prevent the controller reading such Secrets, in case the BMCES CR has already been deployed. The issue exists for all versions of BMO, and is patched in BMO releases v0.9.1 and v0.8.1. Prior upgrading to patched BMO version, duplicate any existing Secret pointed to by `BMCEventSubscription`'s `httpHeadersRef` to the same namespace where the corresponding BMH exists. After upgrade, remove the old Secrets. As a workaround, the operator can configure BMO RBAC to be namespace scoped, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces, and/or use `WATCH_NAMESPACE` configuration option to limit BMO to single namespace. |
| This vulnerability exists in RupeeWeb trading platform due to improper implementation of OTP validation mechanism in certain API endpoints. A remote attacker with valid credentials could exploit this vulnerability by manipulating API responses.
Successful exploitation of this vulnerability could allow the attacker to bypass Two-Factor Authentication (2FA) for other user accounts. |
| This vulnerability exists in RupeeWeb trading platform due to insufficient authorization controls on certain API endpoints handling addition and deletion operations. Successful exploitation of this vulnerability could allow an authenticated remote attacker to modify information belonging to other user accounts. |
| Code Execution via Malicious Files: Attackers can create specially crafted files with embedded code that may execute without adequate security validation, potentially leading to system compromise.
Sandbox Bypass Vulnerability: A flaw in the TERR security mechanism allows attackers to bypass sandbox restrictions, enabling the execution of untrusted code without appropriate controls. |
| This vulnerability exists in RupeeWeb trading platform due to missing rate limiting on OTP requests in certain API endpoints. An authenticated remote attacker could exploit this vulnerability by sending multiple OTP request through vulnerable API endpoints which could lead to the OTP bombing/ flooding on the targeted system. |
| A hard-coded password vulnerability exists in the ControlVault WBDI Driver functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted ControlVault API call can lead to execute priviledged operation. An attacker can issue an api call to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid0, raid10: Don't set discard sectors for request queue
It should use disk_stack_limits to get a proper max_discard_sectors
rather than setting a value by stack drivers.
And there is a bug. If all member disks are rotational devices,
raid0/raid10 set max_discard_sectors. So the member devices are
not ssd/nvme, but raid0/raid10 export the wrong value. It reports
warning messages in function __blkdev_issue_discard when mkfs.xfs
like this:
[ 4616.022599] ------------[ cut here ]------------
[ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0
[ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0
[ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7
[ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246
[ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080
[ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080
[ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000
[ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000
[ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080
[ 4616.213259] FS: 00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000
[ 4616.222298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0
[ 4616.236689] Call Trace:
[ 4616.239428] blkdev_issue_discard+0x52/0xb0
[ 4616.244108] blkdev_common_ioctl+0x43c/0xa00
[ 4616.248883] blkdev_ioctl+0x116/0x280
[ 4616.252977] __x64_sys_ioctl+0x8a/0xc0
[ 4616.257163] do_syscall_64+0x5c/0x90
[ 4616.261164] ? handle_mm_fault+0xc5/0x2a0
[ 4616.265652] ? do_user_addr_fault+0x1d8/0x690
[ 4616.270527] ? do_syscall_64+0x69/0x90
[ 4616.274717] ? exc_page_fault+0x62/0x150
[ 4616.279097] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 4616.284748] RIP: 0033:0x7f9a55398c6b |
| A buffer overflow vulnerability exists in the CvManager_SBI functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted ControlVault API call can lead to a arbitrary code execution. An attacker can issue an api call to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: hisi: Fix potential UAF in OPP handling
Ensure all required data is acquired before calling dev_pm_opp_put(opp)
to maintain correct resource acquisition and release order. |
| The GC-AGENTS-SERVICE running as part of Akamai´s Guardicore Platform Agent for Windows versions prior to v49.20.1, v50.15.0, v51.12.0, v52.2.0 is affected by a local privilege escalation vulnerability. The service will attempt to read an OpenSSL configuration file from a non-existent location that standard Windows users have default write access to. This allows an unprivileged local user to create a crafted "openssl.cnf" file in that location and, by specifying the path to a custom DLL file in a custom OpenSSL engine definition, execute arbitrary commands with the privileges of the Guardicore Agent process. Since Guardicore Agent runs with SYSTEM privileges, this permits an unprivileged user to fully elevate privileges to SYSTEM level in this manner. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix null pointer deref in mt7996_conf_tx()
If a link does not have an assigned channel yet, mt7996_vif_link returns
NULL. We still need to store the updated queue settings in that case, and
apply them later.
Move the location of the queue params to within struct mt7996_vif_link. |
| A vulnerability was found in Undertow. This issue requires enabling the learning-push handler in the server's config, which is disabled by default, leaving the maxAge config in the handler unconfigured. The default is -1, which makes the handler vulnerable. If someone overwrites that config, the server is not subject to the attack. The attacker needs to be able to reach the server with a normal HTTP request. |
| Use of Hard-coded Cryptographic Key vulnerability in ABB RMC-100, ABB RMC-100 LITE.
When the REST interface is enabled by the user, and an attacker gains access to
source code and control network, the attacker can bypass the REST interface authentication and gain access to MQTT configuration data.
This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| AIRI is a self-hosted, artificial intelligence based Grok Companion. In v0.7.2-beta.2 in the `packages/stage-ui/src/components/MarkdownRenderer.vue` path, the Markdown content is processed using the useMarkdown composable, and the processed HTML is rendered directly into the DOM using v-html. An attacker creates a card file containing malicious HTML/JavaScript, then simply processes it using the highlightTagToHtml function (which simply replaces template tags without HTML escaping), and then directly renders it using v-html, leading to cross-site scripting (XSS). The project also exposes the Tauri API, which can be called from the frontend. The MCP plugin exposes a command execution interface function in `crates/tauri-plugin-mcp/src/lib.rs`. This allows arbitrary command execution. `connect_server` directly passes the user-supplied `command` and `args` parameters to `Command::new(command).args(args)` without any input validation or whitelisting. Thus, the previous XSS exploit could achieve command execution through this interface. v0.7.2-beta.3 fixes the issue. |
| ADB(Android Debug Bridge) is affected by type privilege bypass, successful exploitation of this vulnerability may affect service availability. |
| A Reliance on Untrusted Inputs in a Security Decision vulnerability in the logrotate configuration for openSUSE mailman3 package allows the mailman user to sent SIGHUP to arbitrary processes. This issue affects openSUSE Tumbleweed: from ? before 3.3.10-2.1. |
| Cross-site request forgery vulnerability exists in Active! mail 6 BuildInfo: 6.60.06008562 and earlier. If this vulnerability is exploited, unintended E-mail may be sent when a user accesses a specially crafted URL while being logged in. |
| A malicious third party could invoke a persistent denial of service vulnerability in FireEye EDR agent by sending a specially-crafted tamper protection event to the HX service to trigger an exception. This exception will prevent any further tamper protection events from being processed, even after a reboot of HX. |
| Enterprise Protection contains a vulnerability in URL rewriting that allows an unauthenticated remote attacker to send an email which bypasses URL protections impacting the integrity of recipient's email. This occurs due to improper filtering of backslashes within URLs and affects all versions of 8.21, 8.20 and 8.18 prior to 8.21.0 patch 5115, 8.20.6 patch 5114 and 8.18.6 patch 5113 respectively. |
