| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: serialize accept_q access
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix fragment reassembly length accounting
batman-adv keeps a running payload length for queued fragments and uses it
to validate a fragment chain before reassembly.
That accounting currently allows the accumulated fragment length to be
truncated during updates. As a result, malformed fragment chains can
bypass the intended validation and drive reassembly with inconsistent
length state, leading to a local denial of service.
Fix the accounting by storing the accumulated length in a length-typed
field and rejecting update overflows before the existing validation logic
runs.
The fix was verified against the original reproducer and against valid
fragment reassembly paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: hold bridge skb->dev while queued
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope conn->binding slowpath to bound sessions only
When the binding SESSION_SETUP sets conn->binding = true, the flag stays
set after the call so that the global session lookup in
ksmbd_session_lookup_all() can find the session, which was not added to
conn->sessions. Because the flag is connection-wide, the global lookup
path will also resolve any other session by id if asked.
Tighten the global lookup so that the returned session must have this
connection registered in its channel xarray (sess->ksmbd_chann_list).
The channel entry is installed by the existing binding_session path in
ntlm_authenticate()/krb5_authenticate() when a SESSION_SETUP completes
successfully, so this condition is a strict equivalent of "this
connection has been accepted as a channel of this session". Connections
that have not bound to a given session cannot reach it via the global
table.
The existing conn->binding gate for entering the slowpath is preserved
so that non-binding connections keep the fast-path-only behavior, and
the session->state check is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination. |
| A flaw was found in Poppler's Splash backend. A remote attacker could exploit this vulnerability by crafting a malicious PDF file that, when rendered, triggers an integer overflow in the `tilingPatternFill` function. This overflow leads to an undersized heap memory allocation, allowing a subsequent out-of-bounds write. Successful exploitation could result in arbitrary code execution, information disclosure, or denial of service within the context of the application processing the PDF. |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. Prior to 2.94.0, the HTML backend has unsafe URI and path handling. This vulnerability is fixed in 2.94.0. |
| It is possible to bypass the Kerberos pre-authentication check in Apache Kerby by sending a PA-DATA with an unrecognized or unsupported type. Users are recommended to upgrade to version 2.1.2, which fixes this issue. |
| jq is a command-line JSON processor. Prior to 1.8.2, comparing two sufficiently deeply nested arrays with the == operator exhausts the C stack on jq's ordinary command-line surface, resulting in denial of service via stack exhaustion (uncontrolled recursion). The crash occurs in jq's recursive structural comparison code, with the recursion repeating through jvp_array_equal() and jv_equal() in src/jv.c when comparing deeply nested arrays; a nearby sort comparator path through jv_cmp() in src/jv_aux.c overflows the stack at a larger nesting depth from the same missing recursion guard. Anyone running jq comparisons on attacker-controlled deeply nested JSON values, or embedding jq in a context where untrusted data can reach the == comparison path, is affected. This vulnerability is fixed in 1.8.2. |
| Caddy is an extensible server platform that uses TLS by default. From 2.4.0 until 2.11.3, the authorization layer and the /config traversal layer do not agree on what object the path refers to. In this case, a path authorized for one config object is accepted, but then resolves to a different config object during traversal. This happens because the authorization layer uses string prefix matching and the /config traversal layer parses array indices numerically using strconv.Atoi(). This vulnerability is fixed in 2.11.3. |
| The WSO2 API Manager's message flow component, when processing WS-Addressing headers, does not sufficiently validate or restrict user-controlled input within these headers. This omission allows an attacker to manipulate WS-Addressing headers to specify arbitrary destinations for server-initiated requests.
Successful exploitation allows an unauthenticated attacker to control the destination of server-initiated requests originating from the WSO2 API Manager. This direct control can enable unauthorized access to internal network resources or services that would typically be inaccessible from external networks. |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Improper Verification of Cryptographic Signature via the DSA domain-parameter validation in KJUR.crypto.DSA.setPublic (and the related DSA/X509 verification flow in src/dsa-2.0.js). An attacker can forge DSA signatures or X.509 certificates that X509.verifySignature() accepts by supplying malicious domain parameters such as g=1, y=1, and a fixed r=1, which make the verification equation true for any hash. |
| Setracker2 Android Companion App com.tgelec.setracker versions 3.1.5 and prior have a predictable registration ID derived from IMEI. The enrollment system lacks additional authentication before assignment. If an attacker is able to obtain the registration ID, they would be able to arbitrarily enroll watches belonging to other users. |
| Setracker2 Android Companion App com.tgelec.setracker versions 3.1.5 and prior encrypts requests between the watch and its backend with static hardcoded AES keys and initialization vectors. This allows an attacker to decrypt Setracker2 watch traffic. |
| The Setracker2 Android Companion App (com.tgelec.setracker) versions 3.1.5 and earlier uses MD5 to generate a request signature for authenticating communications between the mobile client and the backend REST API. Attackers could potentially reverse the signature to recover the session ID. With the session ID exposed, an attacker could impersonate the legitimate user and issue authenticated API requests. |
| Setracker2 Android Companion App com.tgelec.setracker versions 3.1.5 and prior only require the password hash when authenticating with backend services from the client. This could allow an attacker, who knows the hash, to authenticate and gain full access. |
| Flowise before 3.0.6 (affected versions 2.2.8 and earlier) contains an arbitrary file access vulnerability due to missing validation that the chatflowId and chatId parameters are UUIDs or numbers in file handling operations. By supplying a path-traversal value (e.g., '../../../../../tmp') as the chatflow id, an unauthenticated attacker can use the /api/v1/chatflows endpoint (via addBase64FilesToStorage) to write arbitrary files, and the /api/v1/get-upload-file and /api/v1/openai-assistants-file/download endpoints (via streamStorageFile) to read arbitrary files. Arbitrary file write may lead to remote code execution. |
| The Iptanus File Upload WordPress plugin before 5.1.7 does not implement proper file handling when the duplicatepolicy setting is configured to "maintain both." Due to a Time-of-Check to Time-of-Use (TOCTOU) race condition between the file existence check and the actual file write operation, an authenticated attacker can overwrite files uploaded by other users. |
