| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: allow exp not to be removed in nf_ct_find_expectation
Currently nf_conntrack_in() calling nf_ct_find_expectation() will
remove the exp from the hash table. However, in some scenario, we
expect the exp not to be removed when the created ct will not be
confirmed, like in OVS and TC conntrack in the following patches.
This patch allows exp not to be removed by setting IPS_CONFIRMED
in the status of the tmpl. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: Fix buffer overflow in trans_stat_show
Fix buffer overflow in trans_stat_show().
Convert simple snprintf to the more secure scnprintf with size of
PAGE_SIZE.
Add condition checking if we are exceeding PAGE_SIZE and exit early from
loop. Also add at the end a warning that we exceeded PAGE_SIZE and that
stats is disabled.
Return -EFBIG in the case where we don't have enough space to write the
full transition table.
Also document in the ABI that this function can return -EFBIG error. |
| Das U-Boot 2022.01 has a Buffer Overflow, a different issue than CVE-2022-30552. |
| Das U-Boot 2022.01 has a Buffer Overflow. |
| Das U-Boot through 2020.01 allows attackers to bypass verified boot restrictions and subsequently boot arbitrary images by providing a crafted FIT image to a system configured to boot the default configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00). |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix memory corruption when FW resources change during ifdown
bnxt_set_dflt_rings() assumes that it is always called before any TC has
been created. So it doesn't take bp->num_tc into account and assumes
that it is always 0 or 1.
In the FW resource or capability change scenario, the FW will return
flags in bnxt_hwrm_if_change() that will cause the driver to
reinitialize and call bnxt_cancel_reservations(). This will lead to
bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc
may be greater than 1. This will cause bp->tx_ring[] to be sized too
small and cause memory corruption in bnxt_alloc_cp_rings().
Fix it by properly scaling the TX rings by bp->num_tc in the code
paths mentioned above. Add 2 helper functions to determine
bp->tx_nr_rings and bp->tx_nr_rings_per_tc. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix use-after-free in amdgpu_userq_suspend+0x51a/0x5a0
[ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733
[ +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G W 6.14.0+ #2
[ +0.000009] Tainted: [W]=WARN
[ +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000004] Call Trace:
[ +0.000004] <TASK>
[ +0.000003] dump_stack_lvl+0x76/0xa0
[ +0.000011] print_report+0xce/0x600
[ +0.000009] ? srso_return_thunk+0x5/0x5f
[ +0.000006] ? kasan_complete_mode_report_info+0x76/0x200
[ +0.000007] ? kasan_addr_to_slab+0xd/0xb0
[ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000707] kasan_report+0xbe/0x110
[ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000541] __asan_report_load8_noabort+0x14/0x30
[ +0.000005] amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000535] ? stop_cpsch+0x396/0x600 [amdgpu]
[ +0.000556] ? stop_cpsch+0x429/0x600 [amdgpu]
[ +0.000536] ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu]
[ +0.000536] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu]
[ +0.000542] amdgpu_device_fini_hw+0x581/0xe90 [amdgpu]
[ +0.000485] ? down_write+0xbb/0x140
[ +0.000007] ? __mutex_unlock_slowpath.constprop.0+0x317/0x360
[ +0.000005] ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu]
[ +0.000482] ? __kasan_check_write+0x14/0x30
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? up_write+0x55/0xb0
[ +0.000007] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? blocking_notifier_chain_unregister+0x6c/0xc0
[ +0.000008] amdgpu_driver_unload_kms+0x69/0x90 [amdgpu]
[ +0.000484] amdgpu_pci_remove+0x93/0x130 [amdgpu]
[ +0.000482] pci_device_remove+0xae/0x1e0
[ +0.000008] device_remove+0xc7/0x180
[ +0.000008] device_release_driver_internal+0x3d4/0x5a0
[ +0.000007] device_release_driver+0x12/0x20
[ +0.000004] pci_stop_bus_device+0x104/0x150
[ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40
[ +0.000005] remove_store+0xd7/0xf0
[ +0.000005] ? __pfx_remove_store+0x10/0x10
[ +0.000006] ? __pfx__copy_from_iter+0x10/0x10
[ +0.000006] ? __pfx_dev_attr_store+0x10/0x10
[ +0.000006] dev_attr_store+0x3f/0x80
[ +0.000006] sysfs_kf_write+0x125/0x1d0
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? __kasan_check_write+0x14/0x30
[ +0.000005] kernfs_fop_write_iter+0x2ea/0x490
[ +0.000005] ? rw_verify_area+0x70/0x420
[ +0.000005] ? __pfx_kernfs_fop_write_iter+0x10/0x10
[ +0.000006] vfs_write+0x90d/0xe70
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? __pfx_vfs_write+0x10/0x10
[ +0.000004] ? local_clock+0x15/0x30
[ +0.000008] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __kasan_slab_free+0x5f/0x80
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __kasan_check_read+0x11/0x20
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? fdget_pos+0x1d3/0x500
[ +0.000007] ksys_write+0x119/0x220
[ +0.000005] ? putname+0x1c/0x30
[ +0.000006] ? __pfx_ksys_write+0x10/0x10
[ +0.000007] __x64_sys_write+0x72/0xc0
[ +0.000006] x64_sys_call+0x18ab/0x26f0
[ +0.000006] do_syscall_64+0x7c/0x170
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __pfx___x64_sys_openat+0x10/0x10
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __kasan_check_read+0x11/0x20
[ +0.000003] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? do_syscall_64+0x88/0x170
[ +0.000003] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? irqentry_exit+0x43/0x50
[ +0.000004] ? srso_return_thunk+0x5
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix UAF in panthor_gem_create_with_handle() debugfs code
The object is potentially already gone after the drm_gem_object_put().
In general the object should be fully constructed before calling
drm_gem_handle_create(), except the debugfs tracking uses a separate
lock and list and separate flag to denotate whether the object is
actually initialized.
Since I'm touching this all anyway simplify this by only adding the
object to the debugfs when it's ready for that, which allows us to
delete that separate flag. panthor_gem_debugfs_bo_rm() already checks
whether we've actually been added to the list or this is some error
path cleanup.
v2: Fix build issues for !CONFIG_DEBUGFS (Adrián)
v3: Add linebreak and remove outdated comment (Liviu) |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix UAF on sva unbind with pending IOPFs
Commit 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach
path") disables IOPF on device by removing the device from its IOMMU's
IOPF queue when the last IOPF-capable domain is detached from the device.
Unfortunately, it did this in a wrong place where there are still pending
IOPFs. As a result, a use-after-free error is potentially triggered and
eventually a kernel panic with a kernel trace similar to the following:
refcount_t: underflow; use-after-free.
WARNING: CPU: 3 PID: 313 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0
Workqueue: iopf_queue/dmar0-iopfq iommu_sva_handle_iopf
Call Trace:
<TASK>
iopf_free_group+0xe/0x20
process_one_work+0x197/0x3d0
worker_thread+0x23a/0x350
? rescuer_thread+0x4a0/0x4a0
kthread+0xf8/0x230
? finish_task_switch.isra.0+0x81/0x260
? kthreads_online_cpu+0x110/0x110
? kthreads_online_cpu+0x110/0x110
ret_from_fork+0x13b/0x170
? kthreads_online_cpu+0x110/0x110
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
The intel_pasid_tear_down_entry() function is responsible for blocking
hardware from generating new page faults and flushing all in-flight
ones. Therefore, moving iopf_for_domain_remove() after this function
should resolve this. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: address a potential NULL pointer dereference in the GRED scheduler.
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload(). |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
There are multiple places from where the recovery work gets scheduled
asynchronously. Also, there are multiple places where the caller waits
synchronously for the recovery to be completed. One such place is during
the PM shutdown() callback.
If the device is not alive during recovery_work, it will try to reset the
device using pci_reset_function(). This function internally will take the
device_lock() first before resetting the device. By this time, if the lock
has already been acquired, then recovery_work will get stalled while
waiting for the lock. And if the lock was already acquired by the caller
which waits for the recovery_work to be completed, it will lead to
deadlock.
This is what happened on the X1E80100 CRD device when the device died
before shutdown() callback. Driver core calls the driver's shutdown()
callback while holding the device_lock() leading to deadlock.
And this deadlock scenario can occur on other paths as well, like during
the PM suspend() callback, where the driver core would hold the
device_lock() before calling driver's suspend() callback. And if the
recovery_work was already started, it could lead to deadlock. This is also
observed on the X1E80100 CRD.
So to fix both issues, use pci_try_reset_function() in recovery_work. This
function first checks for the availability of the device_lock() before
trying to reset the device. If the lock is available, it will acquire it
and reset the device. Otherwise, it will return -EAGAIN. If that happens,
recovery_work will fail with the error message "Recovery failed" as not
much could be done. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table(). |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized
If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth
from the OPP table but the bandwidth table was not created because the
interconnect properties were missing in the OPP consumer node, the
kernel will crash with:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
...
pc : _read_bw+0x8/0x10
lr : _opp_table_find_key+0x9c/0x174
...
Call trace:
_read_bw+0x8/0x10 (P)
_opp_table_find_key+0x9c/0x174 (L)
_find_key+0x98/0x168
dev_pm_opp_find_bw_ceil+0x50/0x88
...
In order to fix the crash, create an assert function to check
if the bandwidth table was created before trying to get a
bandwidth with _read_bw(). |
| In the Linux kernel, the following vulnerability has been resolved:
rnbd-srv: Zero the rsp buffer before using it
Before using the data buffer to send back the response message, zero it
completely. This prevents any stray bytes to be picked up by the client
side when there the message is exchanged between different protocol
versions. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix signededness bug in smb_direct_prepare_negotiation()
smb_direct_prepare_negotiation() casts an unsigned __u32 value
from sp->max_recv_size and req->preferred_send_size to a signed
int before computing min_t(int, ...). A maliciously provided
preferred_send_size of 0x80000000 will return as smaller than
max_recv_size, and then be used to set the maximum allowed
alowed receive size for the next message.
By sending a second message with a large value (>1420 bytes)
the attacker can then achieve a heap buffer overflow.
This fix replaces min_t(int, ...) with min_t(u32) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_tcpmss: check remaining length before reading optlen
Quoting reporter:
In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads
op[i+1] directly without validating the remaining option length.
If the last byte of the option field is not EOL/NOP (0/1), the code attempts
to index op[i+1]. In the case where i + 1 == optlen, this causes an
out-of-bounds read, accessing memory past the optlen boundary
(either reading beyond the stack buffer _opt or the
following payload). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry. |
