| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix locking usage for tcon fields
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix decoder allocation crash
When an intermediate port's decoders have been exhausted by existing
regions, and creating a new region with the port in question in it's
hierarchical path is attempted, cxl_port_attach_region() fails to find a
port decoder (as would be expected), and drops into the failure / cleanup
path.
However, during cleanup of the region reference, a sanity check attempts
to dereference the decoder, which in the above case didn't exist. This
causes a NULL pointer dereference BUG.
To fix this, refactor the decoder allocation and de-allocation into
helper routines, and in this 'free' routine, check that the decoder,
@cxld, is valid before attempting any operations on it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix potential double free in create_var_ref()
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update()
vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop
bound and passes the index to vfe_isr_reg_update(). However,
vfe->line[] array is defined with VFE_LINE_NUM_MAX(4):
struct vfe_line line[VFE_LINE_NUM_MAX];
When index is 4, 5, 6, the access to vfe->line[line_id] exceeds
the array bounds and resulting in out-of-bounds memory access.
Fix this by using separate loops for output lines and write masters. |
| In the Linux kernel, the following vulnerability has been resolved:
alpha: fix user-space corruption during memory compaction
Alpha systems can suffer sporadic user-space crashes and heap
corruption when memory compaction is enabled.
Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned
tcache chunk"), and compiler internal errors. The failures disappear
when compaction is disabled or when using global TLB invalidation.
The root cause is insufficient TLB shootdown during page migration.
Alpha relies on ASN-based MM context rollover for instruction cache
coherency, but this alone is not sufficient to prevent stale data or
instruction translations from surviving migration.
Fix this by introducing a migration-specific helper that combines:
- MM context invalidation (ASN rollover),
- immediate per-CPU TLB invalidation (TBI),
- synchronous cross-CPU shootdown when required.
The helper is used only by migration/compaction paths to avoid changing
global TLB semantics.
Additionally, update flush_tlb_other(), pte_clear(), to use
READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering.
This fixes observed crashes on both UP and SMP Alpha systems. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler()
The memcpy function assumes the dynamic array notif->matches is at least
as large as the number of bytes to copy. Otherwise, results->matches may
contain unwanted data. To guarantee safety, extend the validation in one
of the checks to ensure sufficient packet length.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: move wake reason storage into validated event handlers
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt(). |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: fix use-after-free in IO ioctl handlers
The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor
pointer after board->big_gpib_mutex has been released. A concurrent
IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during
this window, causing a use-after-free.
The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly
release big_gpib_mutex before calling their handler. wait_ioctl() is
called with big_gpib_mutex held, but ibwait() releases it internally
when wait_mask is non-zero. In all four cases, the descriptor pointer
obtained from handle_to_descriptor() becomes unprotected.
Fix this by introducing a kernel-only descriptor_busy reference count
in struct gpib_descriptor. Each handler atomically increments
descriptor_busy under file_priv->descriptors_mutex before releasing the
lock, and decrements it when done. close_dev_ioctl() checks
descriptor_busy under the same lock and rejects the close with -EBUSY
if the count is non-zero.
A reference count rather than a simple flag is necessary because
multiple handlers can operate on the same descriptor concurrently
(e.g. IBRD and IBWAIT on the same handle from different threads).
A separate counter is needed because io_in_progress can be cleared from
unprivileged userspace via the IBWAIT ioctl (through general_ibstatus()
with set_mask containing CMPL), which would allow an attacker to bypass
a check based solely on io_in_progress. The new descriptor_busy
counter is only modified by the kernel IO paths.
The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex)
and the handlers only hold descriptors_mutex briefly during the lookup,
so there is no deadlock risk and no impact on IO throughput. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate doorbell_offset in user queue creation
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
(cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec) |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From versions 3.2.0 to before 3.2.11 and 3.3.0 to before 3.3.9, there is a missing authorization and data-masking gap in Argo CD's ServerSideDiff endpoint that allows an attacker with read-only access to extract plaintext Kubernetes Secret data from etcd via the Kubernetes API server's Server-Side Apply dry-run mechanism. This issue has been patched in versions 3.2.11 and 3.3.9. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
We need to check __in6_dev_get() for possible NULL value, as
suggested by Yiming Qian.
Also add skb_dst_dev_rcu() instead of skb_dst_dev(),
and two missing READ_ONCE().
Note that @dev can't be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object(). |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3. |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3. |
| Weblate is a web based localization tool. Prior to version 5.17.1, when a user changes their password, browser sessions are correctly invalidated via "cycle_session_keys()", but DRF API tokens ("wlu_*" prefix) stored in "authtoken_token" are not revoked. This issue has been patched in version 5.17.1. |
