| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in Tenda TDSEE App up to 1.7.12. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /app/ConfirmSmsCode of the component Password Reset Confirmation Code Handler. The manipulation leads to improper restriction of excessive authentication attempts. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.7.15 is able to address this issue. It is recommended to upgrade the affected component. |
| A vulnerability has been found in TRENDnet TV-IP121W 1.1.1 Build 36 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /admin/setup.cgi of the component Web Interface. The manipulation leads to improper authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in eCharge Hardy Barth Salia PLCC up to 2.3.81. Affected by this issue is some unknown functionality of the file /firmware.php of the component Web UI. Performing a manipulation of the argument media results in unrestricted upload. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability classified as problematic was found in Lucky LM-520-SC, LM-520-FSC and LM-520-FSC-SAM up to 20250321. Affected by this vulnerability is an unknown functionality. The manipulation leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames. |
| Improper validation of specified quantity in input issue exists in Real-time Bus Tracking System versions prior to 1.1. If exploited, a denial of service (DoS) condition may be caused by an attacker who can log in to the administrative page of the affected product. |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. A vulnerability was discovered in the BeyondTrust provider implementation for External Secrets Operator versions 0.10.1 through 0.19.2. The provider previously retrieved Kubernetes secrets directly, without validating the namespace context or the type of secret store. This allowed unauthorized cross-namespace secret access, violating security boundaries and potentially exposing sensitive credentials. In version 0.20.0, the provider code was updated to use the `resolvers.SecretKeyRef` utility, which enforces namespace validation and only allows cross-namespace access for `ClusterSecretStore` types. This ensures secrets are only retrieved from the correct namespace, mitigating the risk of unauthorized access. All users should upgrade to the latest version containing this fix. As a workaround, use a policy engine such as Kyverno or OPA to prevent using BeyondTrust provider and/or validate the `(Cluster)SecretStore` and ensure the namespace may only be set when using a `ClusterSecretStore`. |
| The Crawlomatic Multipage Scraper Post Generator plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the crawlomatic_generate_featured_image() function in all versions up to, and including, 2.6.8.1. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| A URL redirection in Pinokio v3.6.23 allows attackers to redirect victim users to attacker-controlled pages. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid updating zero-sized extent in extent cache
As syzbot reported:
F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0]
------------[ cut here ]------------
kernel BUG at fs/f2fs/extent_cache.c:678!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678
Call Trace:
<TASK>
f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085
f2fs_do_zero_range fs/f2fs/file.c:1657 [inline]
f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737
f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030
vfs_fallocate+0x669/0x7e0 fs/open.c:342
ioctl_preallocate fs/ioctl.c:289 [inline]
file_ioctl+0x611/0x780 fs/ioctl.c:-1
do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576
__do_sys_ioctl fs/ioctl.c:595 [inline]
__se_sys_ioctl+0x82/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f07bc58eec9
In error path of f2fs_zero_range(), it may add a zero-sized extent
into extent cache, it should be avoided. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: set dummy blocksize to read boot_block when mounting
When mounting, sb->s_blocksize is used to read the boot_block without
being defined or validated. Set a dummy blocksize before attempting to
read the boot_block.
The issue can be triggered with the following syz reproducer:
mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0)
r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0)
ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000)
mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00',
&(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0)
syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0)
Here, the ioctl sets the bdev block size to 16384. During mount,
get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)),
but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves
sb->s_blocksize at zero.
Later, ntfs_init_from_boot() attempts to read the boot_block while
sb->s_blocksize is still zero, which triggers the bug.
[almaz.alexandrovich@paragon-software.com: changed comment style, added
return value handling] |
| A vulnerability was found in letseeqiji gorobbs up to 1.0.8. It has been classified as critical. This affects the function ResetUserAvatar of the file controller/api/v1/user.go of the component API. The manipulation of the argument filename leads to path traversal. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Check phy before init msta_link in mt7996_mac_sta_add_links()
In order to avoid a possible NULL pointer dereference in
mt7996_mac_sta_init_link routine, move the phy pointer check before
running mt7996_mac_sta_init_link() in mt7996_mac_sta_add_links routine. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: fix divide-by-zero in comedi_buf_munge()
The comedi_buf_munge() function performs a modulo operation
`async->munge_chan %= async->cmd.chanlist_len` without first
checking if chanlist_len is zero. If a user program submits a command with
chanlist_len set to zero, this causes a divide-by-zero error when the device
processes data in the interrupt handler path.
Add a check for zero chanlist_len at the beginning of the
function, similar to the existing checks for !map and
CMDF_RAWDATA flag. When chanlist_len is zero, update
munge_count and return early, indicating the data was
handled without munging.
This prevents potential kernel panics from malformed user commands. |
| In Optigo Networks ONS NC600 versions 4.2.1-084 through 4.7.2-330, an attacker could connect with the device's ssh server and utilize the system's components to perform OS command executions. |
| langchain-ai v0.3.51 was discovered to contain an indirect prompt injection vulnerability in the GmailToolkit component. This vulnerability allows attackers to execute arbitrary code and compromise the application via a crafted email message. NOTE: this is disputed by the Supplier because the code-execution issue was introduced by user-written code that does not adhere to the LangChain security practices. |
| A vulnerability has been identified in SINEC Traffic Analyzer (6GK8822-1BG01-0BA0) (All versions < V3.0). The affected application uses a Content Security Policy that allows unsafe script execution methods. This could allow an attacker to execute unauthorized scripts, potentially leading to cross-site scripting attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
atm/fore200e: Fix possible data race in fore200e_open()
Protect access to fore200e->available_cell_rate with rate_mtx lock in the
error handling path of fore200e_open() to prevent a data race.
The field fore200e->available_cell_rate is a shared resource used to track
available bandwidth. It is concurrently accessed by fore200e_open(),
fore200e_close(), and fore200e_change_qos().
In fore200e_open(), the lock rate_mtx is correctly held when subtracting
vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth.
However, if the subsequent call to fore200e_activate_vcin() fails, the
function restores the reserved bandwidth by adding back to
available_cell_rate without holding the lock.
This introduces a race condition because available_cell_rate is a global
device resource shared across all VCCs. If the error path in
fore200e_open() executes concurrently with operations like
fore200e_close() or fore200e_change_qos() on other VCCs, a
read-modify-write race occurs.
Specifically, the error path reads the rate without the lock. If another
CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in
fore200e_close()) between this read and the subsequent write, the error
path will overwrite the concurrent update with a stale value. This results
in incorrect bandwidth accounting. |
| Lack of file validation in do_update_vps in Avast Business Antivirus for Linux 4.5 on Linux allows local user to spoof or tamper with the update file via an unverified file write. |
| A reflected cross-site scripting vulnerability via a specific parameter exists in SLNX Help Documentation of RICOH Streamline NX. If this vulnerability is exploited, an arbitrary script may be executed in the web browser of the user who accessed the product. |
