| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommupt: Fix short gather if the unmap goes into a large mapping
unmap has the odd behavior that it can unmap more than requested if the
ending point lands within the middle of a large or contiguous IOPTE.
In this case the gather should flush everything unmapped which can be
larger than what was requested to be unmapped. The gather was only
flushing the range requested to be unmapped, not extending to the extra
range, resulting in a short invalidation if the caller hits this special
condition.
This was found by the new invalidation/gather test I am adding in
preparation for ARMv8. Claude deduced the root cause.
As far as I remember nothing relies on unmapping a large entry, so this is
likely not a triggerable bug. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: possible double-free of cctx->remote_heap
fastrpc_init_create_static_process() may free cctx->remote_heap on the
err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove()
frees cctx->remote_heap again if it is non-NULL, which can lead to a
double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg
device is subsequently removed/unbound.
Clear cctx->remote_heap after freeing it in the error path to prevent the
later cleanup from freeing it again.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package serializes DocumentType node fields (internalSubset, publicId, systemId) verbatim without any escaping or validation. When these fields are set programmatically to attacker-controlled strings, XMLSerializer.serializeToString can produce output where the DOCTYPE declaration is terminated early and arbitrary markup appears outside it. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13. |
| RedisTimeSeries is a time-series module for Redis. In all versions before 1.12.14 of RedisTimeSeries, the module does not properly validate serialized values processed through the Redis RESTORE command. An authenticated attacker with permission to execute RESTORE on a server with the RedisTimeSeries module loaded can supply a crafted serialized payload that triggers invalid memory access and may lead to remote code execution. A workaround is to restrict access to the RESTORE command with ACL rules. This has been patched in version 1.12.14. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: some missing initializations on replay
In several places in the code, we have a label to signify
the start of the code where a request can be replayed if
necessary. However, some of these places were missing the
necessary reinitializations of certain local variables
before replay.
This change makes sure that these variables get initialized
after the label. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call ->free_folio() directly in folio_unmap_invalidate()
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()
sqe->len is __u32 but gets stored into sr->len which is int. When
userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF),
sr->len overflows to a negative value. This negative value propagates
through the bundle recv/send path:
1. io_recv(): sel.val = sr->len (ssize_t gets -1)
2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets
0xFFFFFFFFFFFFFFFF)
3. io_ring_buffers_peek(): buf->len is not clamped because max_len
is astronomically large
4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs()
5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1,
causing ret to increase instead of decrease, creating an
infinite loop that reads past the allocated iov[] array
This results in a slab-out-of-bounds read in io_bundle_nbufs() from
the kmalloc-64 slab, as nbufs increments past the allocated iovec
entries.
BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160
Read of size 8 at addr ffff888100ae05c8 by task exp/145
Call Trace:
io_bundle_nbufs+0x128/0x160
io_recv_finish+0x117/0xe20
io_recv+0x2db/0x1160
Fix this by rejecting negative sr->len values early in both
io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32,
any value > INT_MAX indicates overflow and is not a valid length. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: only publish mode_data after clone setup
iptfs_clone_state() stores x->mode_data before allocating the reorder
window. If that allocation fails, the code frees the cloned state and
returns -ENOMEM, leaving x->mode_data pointing at freed memory.
The xfrm clone unwind later runs destroy_state() through x->mode_data,
so the failed clone path tears down IPTFS state that clone_state()
already freed.
Keep the cloned IPTFS state private until all allocations succeed so
failed clones leave x->mode_data unset. The destroy path already
handles a NULL mode_data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.
rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].
Validate addrnr during rule installation so malformed rules are rejected
before the match logic can use an out-of-range value. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: defer tunnel netdev_put to RCU release
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: validate MPLS set/set_masked payload length
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: flowlabel: defer exclusive option free until RCU teardown
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: linearize skb before parsing ND options
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: avoid OGM aggregation when skb tailroom is insufficient
When OGM aggregation state is toggled at runtime, an existing forwarded
packet may have been allocated with only packet_len bytes, while a later
packet can still be selected for aggregation. Appending in this case can
hit skb_put overflow conditions.
Reject aggregation when the target skb tailroom cannot accommodate the new
packet. The caller then falls back to creating a new forward packet
instead of appending. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5enc - fix async decrypt skipping hash verification
krb5enc_dispatch_decrypt() sets req->base.complete as the skcipher
callback, which is the caller's own completion handler. When the
skcipher completes asynchronously, this signals "done" to the caller
without executing krb5enc_dispatch_decrypt_hash(), completely bypassing
the integrity verification (hash check).
Compare with the encrypt path which correctly uses
krb5enc_encrypt_done as an intermediate callback to chain into the
hash computation on async completion.
Fix by adding krb5enc_decrypt_done as an intermediate callback that
chains into krb5enc_dispatch_decrypt_hash() upon async skcipher
completion, matching the encrypt path's callback pattern.
Also fix EBUSY/EINPROGRESS handling throughout: remove
krb5enc_request_complete() which incorrectly swallowed EINPROGRESS
notifications that must be passed up to callers waiting on backlogged
requests, and add missing EBUSY checks in krb5enc_encrypt_ahash_done
for the dispatch_encrypt return value.
Unset MAY_BACKLOG on the async completion path so the user won't
see back-to-back EINPROGRESS notifications. |
| Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server.
If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer.
This issue affects Apache HTTP Server: through 2.4.66.
Users are recommended to upgrade to version 2.4.67, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl()
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: publish jinode after initialization
ext4_inode_attach_jinode() publishes ei->jinode to concurrent users.
It used to set ei->jinode before jbd2_journal_init_jbd_inode(),
allowing a reader to observe a non-NULL jinode with i_vfs_inode
still unset.
The fast commit flush path can then pass this jinode to
jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and
may crash.
Below is the crash I observe:
```
BUG: unable to handle page fault for address: 000000010beb47f4
PGD 110e51067 P4D 110e51067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
RIP: 0010:xas_find_marked+0x3d/0x2e0
Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02
RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246
RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003
RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10
RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec
R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000
R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88
FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
filemap_get_folios_tag+0x87/0x2a0
__filemap_fdatawait_range+0x5f/0xd0
? srso_alias_return_thunk+0x5/0xfbef5
? __schedule+0x3e7/0x10c0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? cap_safe_nice+0x37/0x70
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
filemap_fdatawait_range_keep_errors+0x12/0x40
ext4_fc_commit+0x697/0x8b0
? ext4_file_write_iter+0x64b/0x950
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? vfs_write+0x356/0x480
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
ext4_sync_file+0xf7/0x370
do_fsync+0x3b/0x80
? syscall_trace_enter+0x108/0x1d0
__x64_sys_fdatasync+0x16/0x20
do_syscall_64+0x62/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
```
Fix this by initializing the jbd2_inode first.
Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after
initialization. Readers use READ_ONCE() to fetch the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Buffer overflow in drivers/xen/sys-hypervisor.c
The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is
neither NUL terminated nor a string.
The first causes a buffer overflow as sprintf in buildid_show will
read and copy till it finds a NUL.
00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P|
00000010 b9 a8 01 42 6f 2e 32 |...Bo.2|
00000017
So use a memcpy instead of sprintf to have the correct value:
00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P|
00000010 b9 a8 01 42 |...B|
00000014
(the above have a hack to embed a zero inside and check it's
returned correctly).
This is XSA-485 / CVE-2026-31786 |
