| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in WAVLINK WN551X3-A M51X3_V251020-WO-182e965. This impacts the function sub_41a430 of the file /bin/ioos of the component DNS Resolution Handler. Performing a manipulation of the argument data results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit this vulnerability by sending oversized form POST requests to the `/ipa/migration/migration.py` endpoint. This can force the migration handler to read attacker-controlled request bodies fully into memory, leading to increased memory usage, slower request handling, and potential service disruption or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe()
In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any
subsequent operation fails or when the module is unloaded, the clock
reference count is never decremented via clk_put(), leading to a
resource leak.
Switch to devm_clk_get() so that the clock is automatically managed
and released. |
| A vulnerability has been found in WAVLINK WN536AX6-A V260507. The impacted element is the function wireguard_cli_group handler of the file /protocol.csp of the component WireGuard. The manipulation of the argument group_id/group_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A security vulnerability has been detected in WAVLINK WN536AX6-A V260507_2.0.0. This issue affects the function sub_41a1d8 of the file /bin/ioos of the component WireGuard CLI Group Handler. Such manipulation of the argument group_name leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. |
| A weakness has been identified in WAVLINK WN536AX6-A V260507_2.0.0. This vulnerability affects the function sub_416760 of the file /bin/ioos of the component Web Management Interface. This manipulation of the argument group_name causes os command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This affects the function sub_4162A8 of the file /bin/ioos of the component ovpn_file Handler. Such manipulation of the argument file_id leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This issue affects the function sub_416B50 of the file /bin/ioos. The manipulation of the argument file_id leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability was detected in WAVLINK WN579X3-D V250402. This affects the function port_forward of the file /cgi-bin/wapi.cgi. The manipulation of the argument Name results in os command injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| A security vulnerability has been detected in WAVLINK WL-WN579A3-A 2026-03-10-94f93d4. The impacted element is the function set_wzdgwMesh of the file /cgi-bin/adm.cgi of the component Initial Setup Wizard. The manipulation of the argument wlan_ssid leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| A flaw was found in libsoup. The SoupWebsocketConnection may accept a large WebSocket message, which may cause libsoup to allocate memory and lead to a denial of service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix capability check in xfs
An user reported a bug where he managed to evade group's quota
by changing a file's gid to a different group id the same user
belonged to, even though quotas were enforced on both gids and the
file's size was big enough to exceed the quota's hardlimit.
Commit eba0549bc7d1 replaced a capable() call by a
has_capability_noaudit() to prevent unnecessary selinux audit messages.
Turns out that both calls have slightly different semantics even though
their documentation seems similar. Where in a nutshell:
capable() - Tests the task's effective credentials
has_ns_capability_noaudit() - Tests the task's real credentials
This most of the time has no practical difference but in some cases like
changing attrs (specifically group id in this case) through a NFS client
this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively
bypassing quota accounting checks.
Using instead ns_capable_noaudit() should fix this issue and prevent
selinux audit messages.
This also fix the remaining calls to has_capability_noaudit() |
| A flaw was found in SSSD. An unprivileged local user can repeatedly request lookups for nonexistent entries through the Name Service Switch (NSS) responder. Because the negative cache does not limit the total number of stored entries and only removes expired records when an existing key is rechecked, the cache can grow without bound. This behavior can lead to memory exhaustion, resulting in a Denial of Service (DoS) as the responder becomes unresponsive or terminates. |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.6, Tornado's HTTP header parser accepts obsolete line folding and repeatedly concatenates short continuation lines, causing quadratic CPU consumption on the IOLoop thread. An unauthenticated client can submit a header block containing many obsolete line-folding continuations before application code runs, blocking other connections served by the process. The cost grows with max_header_size, and only availability is affected. This issue is fixed in version 6.6. |
| A vulnerability was found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. This impacts the function getDeviceInfo of the file /var/lib/misc/udhcpd.leases of the component device-information Handler. The manipulation of the argument MAC address results in command injection. The attack can be launched remotely. The exploit has been made public and could be used. |
| A vulnerability was identified in Sunwood-ai-labs github-kanban-mcp-server up to 0.4.0. Impacted is the function handleListIssues of the file src/handlers/issue-handlers.ts. Such manipulation of the argument state/labels leads to os command injection. The attack can be launched remotely. Upgrading to version 0.4.1 is recommended to address this issue. The name of the patch is 253d93bbdf7ee9fe42bd8fdf15feea93ae59cbae. It is suggested to upgrade the affected component. |
| Crass is a Ruby CSS parser that's fully compliant with the CSS Syntax Level 3 specification. Prior to 1.0.7, when the `:preserve_comments` option is not enabled, which is the default, Crass discards CSS comments by recursively consuming the next token. An attacker-provided stylesheet containing a very large number of adjacent comments can cause excessive recursion and trigger a `SystemStackError`, denying service to the parsing application. Preserving comments avoids this recursive path. This issue is fixed in version 1.0.7. |
| Crass is a Ruby CSS parser that's fully compliant with the CSS Syntax Level 3 specification. Prior to 1.0.7, Crass converts `CSS scientific notation` number values with unbounded exponentiation before clamping the result to `Float::MAX`. Applications that use Crass to parse attacker-controlled CSS strings can be forced to spend disproportionate CPU and memory parsing a tiny input, potentially resulting in a crash. This issue is fixed in version 1.0.7. |
