| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap-based buffer overflow vulnerability exists in the network-facing input handling routines of Arcserve Unified Data Protection (UDP). This flaw is reachable without authentication and results from improper bounds checking when processing attacker-controlled input. By sending specially crafted data, a remote attacker can corrupt heap memory, potentially causing a denial of service or enabling arbitrary code execution depending on the memory layout and exploitation techniques used. This vulnerability is similar in nature to CVE-2025-34522 but affects a separate code path or component. No user interaction is required, and exploitation occurs in the context of the vulnerable process. This vulnerability affects all UDP versions prior to 10.2. UDP 10.2 includes the necessary patches and requires no action. Versions 8.0 through 10.1 are supported and require either patch application or upgrade to 10.2. Versions 7.x and earlier are unsupported or out of maintenance and must be upgraded to 10.2 to remediate the issue. |
| An unauthenticated SQL injection vulnerability exists in the GetLyfsByParams endpoint of Bian Que Feijiu Intelligent Emergency and Quality Control System, accessible via the /AppService/BQMedical/WebServiceForFirstaidApp.asmx interface. The backend fails to properly sanitize user-supplied input in the strOpid parameter, allowing attackers to inject arbitrary SQL statements. This can lead to data exfiltration, authentication bypass, and potentially remote code execution, depending on backend configuration. The vulnerability is presumed to affect builds released prior to June 2025 and is remediated in newer versions of the product, though the exact affected range remains undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-23 UTC. |
| OpenLDAP Lightning Memory-Mapped Database (LMDB) versions up to and including 0.9.14, prior to commit 8e1fda8, contain a heap buffer underflow in the readline() function of mdb_load. When processing malformed input containing an embedded NUL byte, an unsigned offset calculation can underflow and cause an out-of-bounds read of one byte before the allocated heap buffer. This can cause mdb_load to crash, leading to a limited denial-of-service condition. |
| Multiple D-Link DSL/DIR/DNS devices contain an authentication bypass and improper access control vulnerability in the dnscfg.cgi endpoint that allows an unauthenticated attacker to access DNS configuration functionality. By directly requesting this endpoint, an attacker can modify the device’s DNS settings without valid credentials, enabling DNS hijacking (“DNSChanger”) attacks that redirect user traffic to attacker-controlled infrastructure. In 2019, D-Link reported that this behavior was leveraged by the "GhostDNS" malware ecosystem targeting consumer and carrier routers. All impacted products were subsequently designated end-of-life/end-of-service, and no longer receive security updates. Exploitation evidence was observed by the Shadowserver Foundation on 2025-11-27 (UTC). |
| Zomplog 3.9 contains a remote code execution vulnerability that allows authenticated attackers to inject and execute arbitrary PHP code through file manipulation endpoints. Attackers can upload files (such as JavaScript) and rename them to .php via the saveE and rename actions, then execute the resulting PHP payload to run system commands. |
| shell-quote's `quote()` function did not validate object-token inputs against the operator model used by `parse()`. The `.op` field was backslash-escaped character by character using `/(.)/g`, which in JavaScript does not match line terminators (\n, \r, U+2028, U+2029). A line terminator in `.op` therefore passed through unescaped into the output; POSIX shells treat a literal newline as a command separator, so any content after it would execute as a second command. The vulnerable code path is reachable in two ways: (1) direct construction of `{ op: '...\n...' }` from external input, and (2) via `parse(cmd, envFn)` when `envFn` returns object tokens whose `.op` is attacker-influenced. Both are documented API surface. Fixed by replacing the per-character escape with strict shape validation: `.op` must match the parser's control-operator allowlist; `{ op: 'glob', pattern }` validates `pattern` and forbids line terminators; `{ comment }` validates `comment` and forbids line terminators; any other object shape throws `TypeError`. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix potencial OOB in get_file_all_info() for compound requests
When a compound request consists of QUERY_DIRECTORY + QUERY_INFO
(FILE_ALL_INFORMATION) and the first command consumes nearly the entire
max_trans_size, get_file_all_info() would blindly call smbConvertToUTF16()
with PATH_MAX, causing out-of-bounds write beyond the response buffer.
In get_file_all_info(), there was a missing validation check for
the client-provided OutputBufferLength before copying the filename into
FileName field of the smb2_file_all_info structure.
If the filename length exceeds the available buffer space, it could lead to
potential buffer overflows or memory corruption during smbConvertToUTF16
conversion. This calculating the actual free buffer size using
smb2_calc_max_out_buf_len() and returning -EINVAL if the buffer is
insufficient and updating smbConvertToUTF16 to use the actual filename
length (clamped by PATH_MAX) to ensure a safe copy operation. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: observe an RCU grace period in macvlan_common_newlink() error path
valis reported that a race condition still happens after my prior patch.
macvlan_common_newlink() might have made @dev visible before
detecting an error, and its caller will directly call free_netdev(dev).
We must respect an RCU period, either in macvlan or the core networking
stack.
After adding a temporary mdelay(1000) in macvlan_forward_source_one()
to open the race window, valis repro was:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
(ip link add invalid% link p2 type macvlan mode source macaddr add
00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4
PING 1.2.3.4 (1.2.3.4): 56 data bytes
RTNETLINK answers: Invalid argument
BUG: KASAN: slab-use-after-free in macvlan_forward_source
(drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
Read of size 8 at addr ffff888016bb89c0 by task e/175
CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
kasan_report (mm/kasan/report.c:597)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
? tasklet_init (kernel/softirq.c:983)
macvlan_handle_frame (drivers/net/macvlan.c:501)
Allocated by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
__kasan_kmalloc (mm/kasan/common.c:419)
__kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657
mm/slub.c:7140)
alloc_netdev_mqs (net/core/dev.c:12012)
rtnl_create_link (net/core/rtnetlink.c:3648)
rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Freed by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kfree (mm/slub.c:6674 mm/slub.c:6882)
rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Drupal Drupal core allows SQL Injection.
This issue affects Drupal core: from 8.9.0 before 10.4.10, from 10.5.0 before 10.5.10, from 10.6.0 before 10.6.9, from 11.0.0 before 11.1.10, from 11.2.0 before 11.2.12, from 11.3.0 before 11.3.10. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate inherited ACE SID length
smb_inherit_dacl() walks the parent directory DACL loaded from the
security descriptor xattr. It verifies that each ACE contains the fixed
SID header before using it, but does not verify that the variable-length
SID described by sid.num_subauth is fully contained in the ACE.
A malformed inheritable ACE can advertise more subauthorities than are
present in the ACE. compare_sids() may then read past the ACE.
smb_set_ace() also clamps the copied destination SID, but used the
unchecked source SID count to compute the inherited ACE size. That could
advance the temporary inherited ACE buffer pointer and nt_size accounting
past the allocated buffer.
Fix this by validating the parent ACE SID count and SID length before
using the SID during inheritance. Compute the inherited ACE size from the
copied SID so the size matches the bounded destination SID. Reject the
inherited DACL if size accumulation would overflow smb_acl.size or the
security descriptor allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: ->d_compare() must not block
... so don't use __getname() there. Switch it (and ntfs_d_hash(), while
we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash()
almost certainly can do with smaller allocations, but let ntfs folks
deal with that - keep the allocation size as-is for now.
Stop abusing names_cachep in ntfs, period - various uses of that thing
in there have nothing to do with pathnames; just use k[mz]alloc() and
be done with that. For now let's keep sizes as-in, but AFAICS none of
the users actually want PATH_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate response sizes in ipc_validate_msg()
ipc_validate_msg() computes the expected message size for each
response type by adding (or multiplying) attacker-controlled fields
from the daemon response to a fixed struct size in unsigned int
arithmetic. Three cases can overflow:
KSMBD_EVENT_RPC_REQUEST:
msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
KSMBD_EVENT_SHARE_CONFIG_REQUEST:
msg_sz = sizeof(struct ksmbd_share_config_response) +
resp->payload_sz;
KSMBD_EVENT_LOGIN_REQUEST_EXT:
msg_sz = sizeof(struct ksmbd_login_response_ext) +
resp->ngroups * sizeof(gid_t);
resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition
can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes
signed and size_t, so a negative ngroups is converted to SIZE_MAX
before the multiply. A wrapped value of msg_sz that happens to
equal entry->msg_sz bypasses the size check on the next line, and
downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz,
kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the
unverified length.
Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST
paths to detect integer overflow without constraining functional
payload size; userspace ksmbd-tools grows NDR responses in 4096-byte
chunks for calls like NetShareEnumAll, so a hard transport cap is
unworkable on the response side. For LOGIN_REQUEST_EXT, reject
resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and
report the error from ipc_validate_msg() so it fires at the IPC
boundary; with that bound the subsequent multiplication and addition
stay well below UINT_MAX. The now-redundant ngroups check and
pr_err in ksmbd_alloc_user() are removed.
This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix
integer overflows on 32 bit systems"), which hardened the request
side. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: avoid infinite loops due to corrupted subpage compact indexes
Robert reported an infinite loop observed by two crafted images.
The root cause is that `clusterofs` can be larger than `lclustersize`
for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.:
blocksize = lclustersize = 512 lcn = 6 clusterofs = 515
Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.
It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`. |
| Homarr is an open-source dashboard. Prior to version 1.45.3, it was possible to craft an input which allowed privilege escalation and getting access to groups of other users due to missing sanitization of inputs in ldap search query. The vulnerability could impact all instances using ldap authentication where a malicious actor had access to a user account. Version 1.45.3 has a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels
IDLETIMER revision 0 rules reuse existing timers by label and always call
mod_timer() on timer->timer.
If the label was created first by revision 1 with XT_IDLETIMER_ALARM,
the object uses alarm timer semantics and timer->timer is never initialized.
Reusing that object from revision 0 causes mod_timer() on an uninitialized
timer_list, triggering debugobjects warnings and possible panic when
panic_on_warn=1.
Fix this by rejecting revision 0 rule insertion when an existing timer with
the same label is of ALARM type. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: ensure ctx->rings is stable for task work flags manipulation
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: avoid reading the written value in offsets array
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug. |
