| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix krb5 mount with username option
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
``` |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled. |
| A vulnerability was detected in Totolink CA750-PoE 6.2c.510. The affected element is the function setUnloadUserData of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. The manipulation of the argument plugin_version results in os command injection. The attack may be launched remotely. The exploit is now public and may be used. |
| A security vulnerability has been detected in Totolink CA750-PoE 6.2c.510. The affected element is the function setUploadUserData of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Such manipulation of the argument FileName leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. |
| A security vulnerability has been detected in Totolink CA750-PoE 6.2c.510. Impacted is the function setNetworkDiag of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. The manipulation of the argument NetDiagHost/NetDiagPingNum/NetDiagPingSize/NetDiagPingTimeOut/NetDiagTracertHop is directly passed by the attacker/so we can control the NetDiagHost/NetDiagPingNum/NetDiagPingSize/NetDiagPingTimeOut/NetDiagTracertHop leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A flaw has been found in Totolink CA750-PoE 6.2c.510. This affects the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Executing a manipulation of the argument PIN can lead to os command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. |
| The egg-mkfont utility in Panda3D versions up to and including 1.10.16 contains an uncontrolled format string vulnerability. The -gp (glyph pattern) command-line option is used directly as the format string for sprintf() with only a single argument supplied. If an attacker provides additional format specifiers, egg-mkfont may read unintended stack values and write the formatted output into generated .egg and .png files, resulting in disclosure of stack-resident memory and pointer values. |
| The egg-mkfont utility in Panda3D versions up to and including 1.10.16 contains a stack-based buffer overflow vulnerability due to use of an unbounded sprintf() call with attacker-controlled input. When constructing glyph filenames, egg-mkfont formats a user-supplied glyph pattern (-gp) into a fixed-size stack buffer without length validation. Supplying an excessively long glyph pattern string can overflow the stack buffer, resulting in memory corruption and a deterministic crash. Depending on build configuration and execution environment, the overflow may also be exploitable for arbitrary code execution. |
| The deploy-stub component in Panda3D versions up to and including 1.10.16 contains a denial of service vulnerability due to unbounded stack allocation. The deploy-stub executable allocates argv_copy and argv_copy2 using alloca() based directly on the attacker-controlled argc value without validation. Supplying a large number of command-line arguments can exhaust stack space and propagate uninitialized stack memory into Python interpreter initialization, resulting in a reliable crash and undefined behavior. |
| Loaded Commerce 6.6 contains a client-side template injection vulnerability via the search parameter that allows unauthenticated attackers to execute arbitrary code in the victim's browser context when they visit a crafted URL. |
| A heap-based buffer overflow vulnerability exists in the network-facing input handling routines of Arcserve Unified Data Protection (UDP). This flaw is reachable without authentication and results from improper bounds checking when processing attacker-controlled input. By sending specially crafted data, a remote attacker can corrupt heap memory, potentially causing a denial of service or enabling arbitrary code execution depending on the memory layout and exploitation techniques used. This vulnerability is similar in nature to CVE-2025-34522 but affects a separate code path or component. No user interaction is required, and exploitation occurs in the context of the vulnerable process. This vulnerability affects all UDP versions prior to 10.2. UDP 10.2 includes the necessary patches and requires no action. Versions 8.0 through 10.1 are supported and require either patch application or upgrade to 10.2. Versions 7.x and earlier are unsupported or out of maintenance and must be upgraded to 10.2 to remediate the issue. |
| An unauthenticated SQL injection vulnerability exists in the GetLyfsByParams endpoint of Bian Que Feijiu Intelligent Emergency and Quality Control System, accessible via the /AppService/BQMedical/WebServiceForFirstaidApp.asmx interface. The backend fails to properly sanitize user-supplied input in the strOpid parameter, allowing attackers to inject arbitrary SQL statements. This can lead to data exfiltration, authentication bypass, and potentially remote code execution, depending on backend configuration. The vulnerability is presumed to affect builds released prior to June 2025 and is remediated in newer versions of the product, though the exact affected range remains undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-23 UTC. |
| OpenLDAP Lightning Memory-Mapped Database (LMDB) versions up to and including 0.9.14, prior to commit 8e1fda8, contain a heap buffer underflow in the readline() function of mdb_load. When processing malformed input containing an embedded NUL byte, an unsigned offset calculation can underflow and cause an out-of-bounds read of one byte before the allocated heap buffer. This can cause mdb_load to crash, leading to a limited denial-of-service condition. |
| Multiple D-Link DSL/DIR/DNS devices contain an authentication bypass and improper access control vulnerability in the dnscfg.cgi endpoint that allows an unauthenticated attacker to access DNS configuration functionality. By directly requesting this endpoint, an attacker can modify the device’s DNS settings without valid credentials, enabling DNS hijacking (“DNSChanger”) attacks that redirect user traffic to attacker-controlled infrastructure. In 2019, D-Link reported that this behavior was leveraged by the "GhostDNS" malware ecosystem targeting consumer and carrier routers. All impacted products were subsequently designated end-of-life/end-of-service, and no longer receive security updates. Exploitation evidence was observed by the Shadowserver Foundation on 2025-11-27 (UTC). |
| Zomplog 3.9 contains a remote code execution vulnerability that allows authenticated attackers to inject and execute arbitrary PHP code through file manipulation endpoints. Attackers can upload files (such as JavaScript) and rename them to .php via the saveE and rename actions, then execute the resulting PHP payload to run system commands. |
| shell-quote's `quote()` function did not validate object-token inputs against the operator model used by `parse()`. The `.op` field was backslash-escaped character by character using `/(.)/g`, which in JavaScript does not match line terminators (\n, \r, U+2028, U+2029). A line terminator in `.op` therefore passed through unescaped into the output; POSIX shells treat a literal newline as a command separator, so any content after it would execute as a second command. The vulnerable code path is reachable in two ways: (1) direct construction of `{ op: '...\n...' }` from external input, and (2) via `parse(cmd, envFn)` when `envFn` returns object tokens whose `.op` is attacker-influenced. Both are documented API surface. Fixed by replacing the per-character escape with strict shape validation: `.op` must match the parser's control-operator allowlist; `{ op: 'glob', pattern }` validates `pattern` and forbids line terminators; `{ comment }` validates `comment` and forbids line terminators; any other object shape throws `TypeError`. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix potencial OOB in get_file_all_info() for compound requests
When a compound request consists of QUERY_DIRECTORY + QUERY_INFO
(FILE_ALL_INFORMATION) and the first command consumes nearly the entire
max_trans_size, get_file_all_info() would blindly call smbConvertToUTF16()
with PATH_MAX, causing out-of-bounds write beyond the response buffer.
In get_file_all_info(), there was a missing validation check for
the client-provided OutputBufferLength before copying the filename into
FileName field of the smb2_file_all_info structure.
If the filename length exceeds the available buffer space, it could lead to
potential buffer overflows or memory corruption during smbConvertToUTF16
conversion. This calculating the actual free buffer size using
smb2_calc_max_out_buf_len() and returning -EINVAL if the buffer is
insufficient and updating smbConvertToUTF16 to use the actual filename
length (clamped by PATH_MAX) to ensure a safe copy operation. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: observe an RCU grace period in macvlan_common_newlink() error path
valis reported that a race condition still happens after my prior patch.
macvlan_common_newlink() might have made @dev visible before
detecting an error, and its caller will directly call free_netdev(dev).
We must respect an RCU period, either in macvlan or the core networking
stack.
After adding a temporary mdelay(1000) in macvlan_forward_source_one()
to open the race window, valis repro was:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
(ip link add invalid% link p2 type macvlan mode source macaddr add
00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4
PING 1.2.3.4 (1.2.3.4): 56 data bytes
RTNETLINK answers: Invalid argument
BUG: KASAN: slab-use-after-free in macvlan_forward_source
(drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
Read of size 8 at addr ffff888016bb89c0 by task e/175
CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
kasan_report (mm/kasan/report.c:597)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
? tasklet_init (kernel/softirq.c:983)
macvlan_handle_frame (drivers/net/macvlan.c:501)
Allocated by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
__kasan_kmalloc (mm/kasan/common.c:419)
__kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657
mm/slub.c:7140)
alloc_netdev_mqs (net/core/dev.c:12012)
rtnl_create_link (net/core/rtnetlink.c:3648)
rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Freed by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kfree (mm/slub.c:6674 mm/slub.c:6882)
rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
