| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in appneta tcpreplay up to 4.5.2-beta2. The impacted element is the function untrunc_packet of the file src/tcpedit/edit_packet.c of the component tcprewrite. Executing manipulation can lead to use after free. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. This patch is called 73008f261f1cdf7a1087dc8759115242696d35da. Applying a patch is advised to resolve this issue. |
| Value provided in one of POST parameters sent during the process of logging in to Times Software E-Payroll is not sanitized properly, which allows an unauthenticated attacker to perform DoS attacks. SQL injection attacks might also be feasible, although so far creating a working exploit has been prevented probably by backend filtering mechanisms.
Additionally, command injection attempts cause the application to return extensive error messages disclosing some information about the internal infrastructure.
Patching status is unknown because the vendor has not replied to messages sent by the CNA. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Zoho Subscriptions Zoho Billing – Embed Payment Form allows Stored XSS. This issue affects Zoho Billing – Embed Payment Form: from n/a through 4.0. |
| A vulnerability was determined in academico-sis academico up to d9a9e2636fbf7e5845ee086bcb03ca62faceb6ab. Affected by this issue is some unknown functionality of the file /edit-photo of the component Profile Picture Handler. This manipulation causes unrestricted upload. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. This product adopts a rolling release strategy to maintain continuous delivery The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Smartstore up to 6.2.0. The affected element is an unknown function of the file /checkout/confirm/ of the component Gift Voucher Handler. The manipulation leads to race condition. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is described as difficult. The vendor was contacted early about this disclosure but did not respond in any way. |
| Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. In Kata Containers versions from 3.20.0 and before, a malicious host can circumvent initdata verification. On TDX systems running confidential guests, a malicious host can selectively fail IO operations to skip initdata verification. This allows an attacker to launch arbitrary workloads while being able to attest successfully to Trustee impersonating any benign workload. This issue has been patched in Kata Containers version 3.21.0. |
| Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. In version 2.17.0, rate limits can be completely bypassed by manipulating the X-Forwarded-For header. This renders IP-based rate limiting ineffective against determined attackers. Litestar's RateLimitMiddleware uses `cache_key_from_request()` to generate cache keys for rate limiting. When an X-Forwarded-For header is present, the middleware trusts it unconditionally and uses its value as part of the client identifier. Since clients can set arbitrary X-Forwarded-For values, each different spoofed IP creates a separate rate limit bucket. An attacker can rotate through different header values to avoid hitting any single bucket's limit. This affects any Litestar application using RateLimitMiddleware with default settings, which likely includes most applications that implement rate limiting. Version 2.18.0 contains a patch for the vulnerability. |
| SillyTavern is a locally installed user interface that allows users to interact with text generation large language models, image generation engines, and text-to-speech voice models. In versions prior to 1.13.4, the web user interface for SillyTavern is susceptible to DNS rebinding, allowing attackers to perform actions like install malicious extensions, read chats, inject arbitrary HTML for phishing attacks, etc. The vulnerability has been patched in the version 1.13.4 by introducing a server configuration setting that enables a validation of host names in inbound HTTP requests according to the provided list of allowed hosts: `hostWhitelist.enabled` in config.yaml file or `SILLYTAVERN_HOSTWHITELIST_ENABLED` environment variable. While the setting is disabled by default to honor a wide variety of existing user configurations and maintain backwards compatibility, existing and new users are encouraged to review their server configurations and apply necessary changes to their setup, especially if hosting over the local network while not using SSL. |
| AliasVault is a privacy-first password manager with built-in email aliasing. A server-side request forgery (SSRF) vulnerability exists in the favicon extraction feature of AliasVault API versions 0.23.0 and lower. The extractor fetches a user-supplied URL, parses the returned HTML, and follows <link rel="icon" href="…">. Although the initial URL is validated to allow only HTTP/HTTPS with default ports, the extractor automatically follows redirects and does not block requests to loopback or internal IP ranges. An authenticated, low-privileged user can exploit this behavior to coerce the backend into making HTTP(S) requests to arbitrary internal hosts and non-default ports. If the target host serves a favicon or any other valid image, the response is returned to the attacker in Base64 form. Even when no data is returned, timing and error behavior can be abused to map internal services. This vulnerability only affects self-hosted AliasVault instances that are reachable from the public internet with public user registration enabled. Private/internal deployments without public sign-ups are not directly exploitable. This issue has been fixed in AliasVault release 0.23.1. |
| Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.128.Final and 4.2.7.Final, the SMTP codec in Netty contains an SMTP command injection vulnerability due to insufficient input validation for Carriage Return (\r) and Line Feed (\n) characters in user-supplied parameters. The vulnerability exists in io.netty.handler.codec.smtp.DefaultSmtpRequest, where parameters are directly concatenated into the SMTP command string without sanitization. When methods such as SmtpRequests.rcpt(recipient) are called with a malicious string containing CRLF sequences, attackers can inject arbitrary SMTP commands. Because the injected commands are sent from the server's trusted IP address, resulting emails will likely pass SPF and DKIM authentication checks, making them appear legitimate. This allows remote attackers who can control SMTP command parameters (such as email recipients) to forge arbitrary emails from the trusted server, potentially impersonating executives and forging high-stakes corporate communications. This issue has been patched in versions 4.1.129.Final and 4.2.8.Final. No known workarounds exist. |
| quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| A vulnerability in the CivetWeb library's function mg_handle_form_request allows remote attackers to trigger a denial of service (DoS) condition. By sending a specially crafted HTTP POST request containing a null byte in the payload, the server enters an infinite loop during form data parsing. Multiple malicious requests will result in complete CPU exhaustion and render the service unresponsive to further requests.
This issue was fixed in commit 782e189. This issue affects only the library, standalone executable pre-built by vendor is not affected. |
| Mastra is a Typescript framework for building AI agents and assistants. Versions 0.13.8 through 0.13.20-alpha.0 are vulnerable to a Directory Traversal attack that results in the disclosure of directory listings. The code contains a security check to prevent path traversal for reading file contents, but this check is effectively bypassed by subsequent logic that attempts to find directory suggestions. An attacker can leverage this flaw to list the contents of arbitrary directories on the user's filesystem, including the user's home directory, exposing sensitive information about the file system's structure. This issue is fixed in version 0.13.20. |
| PyVista provides 3D plotting and mesh analysis through an interface for the Visualization Toolkit (VTK). Version 0.46.3 of the PyVista Project is vulnerable to remote code execution via dependency confusion. Two pieces of code use`--extra-index-url`. But when `--extra-index-url` is used, pip always checks for the PyPI index first, and then the external index. One package listed in the code is not published in PyPI. If an attacker publishes a package with higher version in PyPI, the malicious code from the attacker controlled package may be pulled, leading to remote code execution and a supply chain attack. As of time of publication, a patched version is unavailable. |
| Better Auth is an authentication and authorization library for TypeScript. In versions prior to 1.3.26, unauthenticated attackers can create or modify API keys for any user by passing that user's id in the request body to the `api/auth/api-key/create` route. `session?.user ?? (authRequired ? null : { id: ctx.body.userId })`. When no session exists but `userId` is present in the request body, `authRequired` becomes false and the user object is set to the attacker-controlled ID. Server-only field validation only executes when `authRequired` is true (lines 280-295), allowing attackers to set privileged fields. No additional authentication occurs before the database operation, so the malicious payload is accepted. The same pattern exists in the update endpoint. This is a critical authentication bypass enabling full an unauthenticated attacker can generate an API key for any user and immediately gain complete authenticated access. This allows the attacker to perform any action as the victim user using the api key, potentially compromise the user data and the application depending on the victim's privileges. Version 1.3.26 contains a patch for the issue. |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. A vulnerability was discovered in the BeyondTrust provider implementation for External Secrets Operator versions 0.10.1 through 0.19.2. The provider previously retrieved Kubernetes secrets directly, without validating the namespace context or the type of secret store. This allowed unauthorized cross-namespace secret access, violating security boundaries and potentially exposing sensitive credentials. In version 0.20.0, the provider code was updated to use the `resolvers.SecretKeyRef` utility, which enforces namespace validation and only allows cross-namespace access for `ClusterSecretStore` types. This ensures secrets are only retrieved from the correct namespace, mitigating the risk of unauthorized access. All users should upgrade to the latest version containing this fix. As a workaround, use a policy engine such as Kyverno or OPA to prevent using BeyondTrust provider and/or validate the `(Cluster)SecretStore` and ensure the namespace may only be set when using a `ClusterSecretStore`. |
| Reflex is a library to build full-stack web apps in pure Python. In versions 0.5.4 through 0.8.14, the /auth-codespace endpoint automatically assigns the redirect_to query parameter value directly to client-side links without any validation and triggers automatic clicks when the page loads in a GitHub Codespaces environment. This allows attackers to redirect users to arbitrary external URLs. The vulnerable route is only registered when a Codespaces environment is detected, and the detection is controlled by environment variables. The same behavior can be activated in production if the GITHUB_CODESPACES_PORT_FORWARDING_DOMAIN environment variable is set. The vulnerability occurs because the code assigns the redirect_to query parameter directly to a.href without any validation and immediately triggers a click (automatic navigation), allowing users to be sent to arbitrary external domains. The execution condition is based on the presence of a sessionStorage flag, meaning it triggers immediately on first visits or in incognito/private browsing windows, with no server-side origin/scheme whitelist or internal path enforcement defenses in place. This issue has been patched in version 0.8.15. As a workaround, users can ensure that GITHUB_CODESPACES_PORT_FORWARDING_DOMAIN is not set in a production environment. |
