| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The YoSmart YoLink MQTT broker through 2025-10-02 does not enforce sufficient authorization controls to prevent cross-account attacks, allowing an attacker to remotely operate affected devices if the attacker obtains the associated device IDs. Because YoLink device IDs are predictable, an attacker can exploit this to gain full control over any other YoLink user's devices. |
| The YoSmart YoLink application through 2025-10-02 has session tokens with unexpectedly long lifetimes. |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| The YoSmart YoLink API through 2025-10-02 uses an endpoint URL that is derived from a device's MAC address along with an MD5 hash of non-secret information, such as a key that begins with cf50. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| DCIM dcTrack platforms utilize default and hard-coded credentials for access. An attacker could use these credentials to administer the database, escalate privileges on the platform or execute system commands on the host. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
| Ollama MCP Server execAsync Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ollama MCP Server. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the implementation of the execAsync method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-27683. |
| A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Cross Site Scripting vulnerability in DokuWiki 2025-05-14a 'Librarian'[56.1] allows a remote attacker to execute arbitrary code via the q parameter |
| A vulnerability was found in javahongxi whatsmars 2021.4.0. It has been rated as problematic. Affected by this issue is the function initialize of the file /whatsmars-archetypes/whatsmars-initializr/src/main/java/org/hongxi/whatsmars/initializr/controller/InitializrController.java. The manipulation of the argument artifactId leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| yawkat LZ4 Java provides LZ4 compression for Java. Insufficient clearing of the output buffer in Java-based decompressor implementations in lz4-java 1.10.0 and earlier allows remote attackers to read previous buffer contents via crafted compressed input. In applications where the output buffer is reused without being cleared, this may lead to disclosure of sensitive data. JNI-based implementations are not affected. This vulnerability is fixed in 1.10.1. |
| Schlix CMS 2.2.6-6 contains a persistent cross-site scripting vulnerability that allows authenticated users to inject malicious scripts into category titles. Attackers can create a new contact category with a script payload that will execute when the page is viewed by other users. |
| A vulnerability was detected in xerrors Yuxi-Know up to 0.4.0. This vulnerability affects the function OtherEmbedding.aencode of the file /src/models/embed.py. Performing manipulation of the argument health_url results in server-side request forgery. The attack can be initiated remotely. The exploit is now public and may be used. The patch is named 0ff771dc1933d5a6b78f804115e78a7d8625c3f3. To fix this issue, it is recommended to deploy a patch. The vendor responded with a vulnerability confirmation and a list of security measures they have established already (e.g. disabled URL parsing, disabled URL upload mode, removed URL-to-markdown conversion). |
| Freeter 1.2.1 contains a persistent cross-site scripting vulnerability that allows attackers to store malicious payloads in custom widget titles and files. Attackers can craft malicious files with embedded scripts that execute when victims interact with the application, potentially enabling remote code execution. |
| Kmaleon 1.1.0.205 contains an authenticated SQL injection vulnerability in the 'tipocomb' parameter of kmaleonW.php that allows attackers to manipulate database queries. Attackers can exploit this vulnerability using boolean-based, error-based, and time-based blind SQL injection techniques to potentially extract or manipulate database information. |
