| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FFmpeg through 8.1.2, fixed in commit b506faf, contains a heap out-of-bounds write vulnerability in the native PNG and APNG encoders that allows remote attackers to corrupt heap memory by supplying a crafted PNG image with a malicious eXIf chunk. Attackers can craft an eXIf chunk where multiple IFD entries reference the same large value payload, causing canonical serialization to expand the output far beyond the undersized allocation estimated by add_exif_profile_size(), resulting in png_write_chunk() writing tens of thousands of bytes past the buffer boundary, leading to deterministic heap corruption, process crash, and potentially arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: Avoid use-after-free in fuse_uring_async_stop_queues
fuse_uring_async_stop_queues() might run when the last reference
on ring->queue_refs was already dropped.
In order to avoid an early destruction a reference on struct fuse_conn
is now taken before starting fuse_uring_async_stop_queues() and that
reference is only released when that delayed work queue terminates. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). |
| Use after free in V8 in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Extensions in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: validate reply message payload bounds against transfer length
nvmet_auth_reply() accesses the variable-length rval[] array using
attacker-controlled hl (hash length) and dhvlen (DH value length) fields
without verifying they fit within the allocated buffer of tl bytes.
A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a
small transfer length but large hl/dhvlen values, causing out-of-bounds
heap reads when the target processes the DH public key (rval + 2*hl) or
performs the host response memcmp.
With DH authentication configured, the OOB pointer is passed directly to
sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching
up to 526 bytes past the buffer. This is exploitable pre-authentication.
Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before
any access to the variable-length fields.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
block: skip sync_blockdev() on surprise removal in bdev_mark_dead()
bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no ->mark_dead op)
lost its !surprise guard when the holder ->mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.
syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -> blk_mark_disk_dead() ->
bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.
Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.
Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ulpi: fix memory leak on registration failure
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: misc: uss720: unregister parport on probe failure
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| Incorrect security UI in Extensions in Google Chrome prior to 151.0.7922.72 allowed an attacker who convinced a user to install a malicious extension to perform UI spoofing via a crafted Chrome Extension. (Chromium security severity: Medium) |
| Insufficient policy enforcement in Presentation in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect
Submitted write URBs are not stopped on close() and therefore need to be
stopped unconditionally on disconnect() to avoid use-after-free in the
completion handler. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()
kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 *
KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that
skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can
deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or
leave a short trailing remainder on a later loop iteration. Either case
underflows usb_packet_length to about 65530.
That bypasses the usb_packet_length < ether_packet_length truncation path.
The device-supplied ether_packet_length, a le16 up to 65535 read from
header_start[2], then drives a memcmp() and the following skb_trim() and
skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,
which is 14000 bytes. That is an out of bounds read.
Require both the start and end framing headers to be present before
subtracting them, on every loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()
When a container exits, the following BUG_ON() is occasionally triggered:
==================================================================
VFS: Busy inodes after unmount of sdb (ext4)
------------[ cut here ]------------
kernel BUG at fs/super.c:695!
CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : generic_shutdown_super+0xf0/0x100
lr : generic_shutdown_super+0xf0/0x100
Call trace:
generic_shutdown_super+0xf0/0x100
kill_block_super+0x20/0x48
ext4_kill_sb+0x28/0x60
deactivate_locked_super+0x54/0x130
deactivate_super+0x84/0xa0
cleanup_mnt+0xa4/0x140
__cleanup_mnt+0x18/0x28
task_work_run+0x78/0xe0
do_notify_resume+0x204/0x240
==================================================================
The root cause is a race between cgroup_writeback_umount() and
inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between
inode_prepare_wbs_switch() returning true and the subsequent
wb_queue_isw() call. Following is the process that triggers the issue:
CPU A (umount) | CPU B (writeback)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
inode_switch_wbs/cleanup_offline_cgwb
atomic_inc(&isw_nr_in_flight)
inode_prepare_wbs_switch
-> passes SB_ACTIVE check
__iget(inode)
generic_shutdown_super
sb->s_flags &= ~SB_ACTIVE
cgroup_writeback_umount(sb)
smp_mb()
atomic_read(&isw_nr_in_flight)
rcu_barrier()
-> no pending RCU callbacks
flush_workqueue(isw_wq)
-> nothing queued, returns
evict_inodes(sb)
-> Inode skipped as isw still holds a ref.
sop->put_super(sb)
/* destroys percpu counters */
-> VFS: Busy inodes after unmount!
wb_queue_isw()
queue_work(isw_wq, ...)
/* later in work function */
inode_switch_wbs_work_fn
process_inode_switch_wbs
iput() -> evict
percpu_counter_dec() // UAF!
Fix this by extending the RCU read-side critical section in
inode_switch_wbs() and cleanup_offline_cgwb() to cover from
inode_prepare_wbs_switch() through wb_queue_isw(). Since there is
no sleep in this window, rcu_read_lock() can be used. Then add a
synchronize_rcu() in cgroup_writeback_umount() before the existing
rcu_barrier(), so that all in-flight switchers that have passed the
SB_ACTIVE check have completed queue_work() before flush_workqueue()
is called.
The existing rcu_barrier() is intentionally retained so this fix can
be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that
still queue switches via queue_rcu_work(). It is a no-op on current
mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on
wb->list_lock when switching inodes")) and is removed in a follow-up
patch. |
| Inappropriate implementation in DevTools in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent path traversal bypass by restricting caseless retry
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately. |
| Inappropriate implementation in SiteIsolation in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| Insufficient policy enforcement in ControlledFrame in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: Medium) |
