| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed. |
| Incorrect access control in Meabilis CMS 1.0 allows attackers to access other users' address books via unspecified vectors. |
| Cross Site Scripting vulnerability in Quorum onQ OS v.6.0.0.5.2064 allows a remote attacker to obtain sensitive information via the msg parameter in the Login page. |
| Multiple Cisco products are affected by a vulnerability in the Ethernet Frame Decoder of the Snort detection engine that could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition.
The vulnerability is due to improper handling of error conditions when processing Ethernet frames. An attacker could exploit this vulnerability by sending malicious Ethernet frames through an affected device. A successful exploit could allow the attacker to exhaust disk space on the affected device, which could result in administrators being unable to log in to the device or the device being unable to boot up correctly.Note: Manual intervention is required to recover from this situation. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| Collision in MiniFilter driver in Avast Software Avast Free Antivirus before 25.9 on Windows allows a local attacker with administrative privileges to disable real-time protection and self-defense mechanisms. |
| SQL injection vulnerability in DIAL's CentrosNet v2.64. Allows an attacker to retrieve, create, update, and delete databases by sending POST and GET requests with the 'ultralogin' parameter in '/centrosnet/ultralogin.php'. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Fix crash due to uninitialized current_vmcs
KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as
a nested hypervisor on top of Hyper-V. When MSR bitmap is updated,
evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark
that the msr bitmap was changed.
vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr
-> vmx_msr_bitmap_l01_changed which in the end calls this function. The
function checks for current_vmcs if it is null but the check is
insufficient because current_vmcs is not initialized. Because of this, the
code might incorrectly write to the structure pointed by current_vmcs value
left by another task. Preemption is not disabled, the current task can be
preempted and moved to another CPU while current_vmcs is accessed multiple
times from evmcs_touch_msr_bitmap() which leads to crash.
The manipulation of MSR bitmaps by callers happens only for vmcs01 so the
solution is to use vmx->vmcs01.vmcs instead of current_vmcs.
BUG: kernel NULL pointer dereference, address: 0000000000000338
PGD 4e1775067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
...
RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel]
...
Call Trace:
vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel]
vmx_vcpu_create+0xe6/0x540 [kvm_intel]
kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm]
kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm]
kvm_vm_ioctl+0x53f/0x790 [kvm]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| A vulnerability, which was classified as critical, has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400 and Magic R3010 up to V100R014. Affected by this issue is the function FCGI_WizardProtoProcess of the file /api/wizard/getSpecs of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| A vulnerability classified as critical was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400 and Magic R3010 up to V100R014. Affected by this vulnerability is the function FCGI_WizardProtoProcess of the file /api/wizard/getCapability of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| A vulnerability classified as critical has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. Affected is the function FCGI_CheckStringIfContainsSemicolon of the file /api/wizard/getBasicInfo of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| An authentication bypass vulnerability exists in LG Innotek camera models LND7210 and LNV7210R. The vulnerability allows a malicious actor to gain access to camera information including user account information. |
| A vulnerability has been found in shuanx BurpAPIFinder up to 2.0.2 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file BurpApiFinder.db. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability, which was classified as critical, was found in PowerCreator CMS 1.0. Affected is an unknown function of the file /OpenPublicCourse.aspx. The manipulation of the argument cid leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Siklu MultiHaul TG series devices before version 2.0.0 contain an unauthenticated vulnerability that allows remote attackers to retrieve randomly generated credentials via a network request. Attackers can send a specific hex-encoded command to port 12777 to obtain username and password, enabling direct SSH access to the device. |
| Compuware iStrobe Web 20.13 contains a pre-authentication remote code execution vulnerability that allows unauthenticated attackers to upload malicious JSP files through a path traversal in the file upload form. Attackers can exploit the 'fileName' parameter to upload a web shell and execute arbitrary commands by sending POST requests to the uploaded JSP endpoint. |
| A vulnerability has been identified in Rancher Manager, where sensitive
information, including secret data, cluster import URLs, and
registration tokens, is exposed to any entity with access to Rancher
audit logs. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
Resolves a panic that can occur on AMD systems, typically during host
shutdown, after the PTDMA driver had been exercised. The issue was
the pt_issue_pending() function is mistakenly assuming that there will
be at least one descriptor in the Submitted queue when the function
is called. However, it is possible that both the Submitted and Issued
queues could be empty, which could result in pt_cmd_callback() being
mistakenly called with a NULL pointer.
Ref: Bugzilla Bug 216856. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
The config passed in by pad wakeup is 1, when num_configs is 1,
Configuration [1] should not be fetched, which will be detected
by KASAN as a memory out of bounds condition. Modify to get
configs[1] when num_configs is 2. |
