| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Glutton V1 service endpoints were exposed without any authentication on Gotham stacks, this could have allowed users that did not have any permission to hit glutton backend directly and read/update/delete data. The affected service has been patched and automatically deployed to all Apollo-managed Gotham Instances |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: Fix blocked task
Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for
serial driver") and its dependent commit 86fa39dd6fb7 ("serial:
qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the
first one causes regression - hang task on Qualcomm RB1 board (QRB2210)
and unable to use serial at all during normal boot:
INFO: task kworker/u16:0:12 blocked for more than 42 seconds.
Not tainted 6.17.0-rc1-00004-g53e760d89498 #9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: async async_run_entry_fn
Call trace:
__switch_to+0xe8/0x1a0 (T)
__schedule+0x290/0x7c0
schedule+0x34/0x118
rpm_resume+0x14c/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
__pm_runtime_resume+0x50/0x9c
__driver_probe_device+0x58/0x120
driver_probe_device+0x3c/0x154
__driver_attach_async_helper+0x4c/0xc0
async_run_entry_fn+0x34/0xe0
process_one_work+0x148/0x290
worker_thread+0x2c4/0x3e0
kthread+0x118/0x1c0
ret_from_fork+0x10/0x20
The issue was reported on 12th of August and was ignored by author of
commits introducing issue for two weeks. Only after complaining author
produced a fix which did not work, so if original commits cannot be
reliably fixed for 5 weeks, they obviously are buggy and need to be
dropped. |
| Dumb Drop is a file upload application. Users with permission to upload to the service are able to exploit a path traversal vulnerability to overwrite arbitrary system files. As the container runs as root by default, there is no limit to what can be overwritten. With this, it's possible to inject malicious payloads into files ran on schedule or upon certain service actions. As the service is not required to run with authentication enabled, this may permit wholly unprivileged users root access. Otherwise, anybody with a PIN. |
| MailCleaner before 28d913e has default values of ssh_host_dsa_key, ssh_host_rsa_key, and ssh_host_ed25519_key that persist after installation. |
| The product implements access controls via a policy or other feature with the intention to disable or restrict accesses (reads and/or writes) to assets in a system from untrusted agents. However, implemented access controls lack required granularity, which renders the control policy too broad because it allows accesses from unauthorized agents to the security-sensitive assets. (CWE-1220)
Hitachi Vantara Pentaho Business Analytics Server versions before 10.2.0.0 and 9.3.0.9, including 8.3.x, do not correctly perform an authorization check in the user console trash content
An attacker exploits a weakness in the configuration of access controls and is able to bypass the intended protection that these measures guard against and thereby obtain unauthorized access to the system or network. |
| The product does not handle or incorrectly handles when it has insufficient privileges to access resources or functionality as specified by their permissions. This may cause it to follow unexpected code paths that may leave the product in an invalid state. (CWE-280)
Hitachi Vantara Pentaho Business Analytics Server versions before 10.2.0.0 and 9.3.0.9, including 8.3.x, do not handle invalid and missing permissions correctly, resulting in a denial of service.
An adversary leverages a legitimate capability of an application in such a way as to achieve a negative technical impact. |
| A privilege escalation vulnerability exists in Google Cloud's Dialogflow CX.
Dialogflow agent developers with Webhook editor permission are able to configure Webhooks using Dialogflow service agent access token authentication.
This allows the attacker to escalate their privileges from agent-level to project-level, granting them unauthorized access to manage resources in services associated with the project, leading to unexpected costs and resource depletion for the producer project.
A fix was applied on the server side to protect from this vulnerability in February 2025. No customer action is required. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
[Cc stable] |
| Django-Select2 is a Django integration for Select2. Prior to version 8.4.1, instances of HeavySelect2Mixin subclasses like the ModelSelect2MultipleWidget and ModelSelect2Widget can leak secret access tokens across requests. This can allow users to access restricted query sets and restricted data. This issue has been patched in version 8.4.1. |
| A malicious actor can access camera configuration information, including account credentials, without authenticating when accessing a vulnerable URL. |
| Certain models of routers from Billion Electric has hard-coded embedded linux credentials, allowing attackers to log in through the SSH service using these credentials and obtain root privilege of the system. |
| School Affairs System from Quanxun has an Exposure of Sensitive Information, allowing unauthenticated attackers to view specific pages and obtain database information as well as plaintext administrator credentials. |
| NetVision Information ISOinsight has a Reflected Cross-site Scripting vulnerability, allowing unauthenticated remote attackers to execute arbitrary JavaScript code in the user's browser through phishing techniques. |
| A vulnerability was found in TRENDnet TI-G102i 1.0.7.S0_ /1.0.8.S0_ and classified as problematic. This issue affects the function plugins_call_handle_uri_raw of the file /usr/sbin/lighttpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Profession Fit 5.0.99 Build 44910 allows authorization bypass via a direct request for /api/challenges/{id} and also URLs for eversports, the user-management page, and the plane page. |
| A vulnerability was found in TRENDnet TEW-411BRP+ 2.07. It has been classified as problematic. Affected is the function sub_401DB0 of the file /usr/sbin/httpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Directory traversal vulnerability in beiyuouo arxiv-daily thru 2025-05-06 (commit fad168770b0e68aef3e5acfa16bb2e7a7765d687) when parsing the the topic.yml file in the generation logic in daily_arxiv.py. |
| A vulnerability classified as problematic was found in opensolon up to 3.1.0. This vulnerability affects the function render_mav of the file /aa of the component org.noear.solon.core.handle.RenderManager. The manipulation of the argument template with the input ../org/example/HelloApp.class leads to path traversal: '../filedir'. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| SAP Field Logistics Manage Logistics application OData meta-data property is vulnerable to data tampering, due to which certain fields could be externally modified by an attacker causing low impact on integrity of the application. Confidentiality and availability are not impacted. |
| Bypass vulnerability in the authentication method in the GTT Tax Information System application, related to the Active Directory (LDAP) login method.
Authentication is performed through a local WebSocket, but the web application does not properly validate the authenticity or origin of the data received, allowing an attacker with access to the local machine or internal network to impersonate the legitimate WebSocket and inject manipulated information.
Exploiting this vulnerability could allow an attacker to authenticate as any user in the domain, without the need for valid credentials, compromising the confidentiality, integrity, and availability of the application and its data. |
