| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix crash when config small gso_max_size/gso_ipv4_max_size
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow
in sk_dst_gso_max_size(), which may trigger a BUG_ON crash,
because sk->sk_gso_max_size would be much bigger than device limits.
Call Trace:
tcp_write_xmit
tso_segs = tcp_init_tso_segs(skb, mss_now);
tcp_set_skb_tso_segs
tcp_skb_pcount_set
// skb->len = 524288, mss_now = 8
// u16 tso_segs = 524288/8 = 65535 -> 0
tso_segs = DIV_ROUND_UP(skb->len, mss_now)
BUG_ON(!tso_segs)
Add check for the minimum value of gso_max_size and gso_ipv4_max_size. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't call cleanup on profile rollback failure
When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.
This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.
[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 745.538222] #PF: supervisor read access in kernel mode
<snipped>
[ 745.551290] Call Trace:
[ 745.551590] <TASK>
[ 745.551866] ? __die+0x20/0x60
[ 745.552218] ? page_fault_oops+0x150/0x400
[ 745.555307] ? exc_page_fault+0x79/0x240
[ 745.555729] ? asm_exc_page_fault+0x22/0x30
[ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]
[ 745.556698] auxiliary_bus_remove+0x18/0x30
[ 745.557134] device_release_driver_internal+0x1df/0x240
[ 745.557654] bus_remove_device+0xd7/0x140
[ 745.558075] device_del+0x15b/0x3c0
[ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]
[ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]
[ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]
[ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]
[ 745.560694] pci_device_remove+0x39/0xa0
[ 745.561112] device_release_driver_internal+0x1df/0x240
[ 745.561631] driver_detach+0x47/0x90
[ 745.562022] bus_remove_driver+0x84/0x100
[ 745.562444] pci_unregister_driver+0x3b/0x90
[ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]
[ 745.563415] __x64_sys_delete_module+0x14d/0x2f0
[ 745.563886] ? kmem_cache_free+0x1b0/0x460
[ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190
[ 745.564825] do_syscall_64+0x6d/0x140
[ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 745.565725] RIP: 0033:0x7f1579b1288b |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: Add cancel_work_sync before module remove
If we remove the module which will call mpc52xx_spi_remove
it will free 'ms' through spi_unregister_controller.
while the work ms->work will be used. The sequence of operations
that may lead to a UAF bug.
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in mpc52xx_spi_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix integer overflow in BLKSECDISCARD
I independently rediscovered
commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155
block: fix overflow in blk_ioctl_discard()
but for secure erase.
Same problem:
uint64_t r[2] = {512, 18446744073709551104ULL};
ioctl(fd, BLKSECDISCARD, r);
will enter near infinite loop inside blkdev_issue_secure_erase():
a.out: attempt to access beyond end of device
loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048
bio_check_eod: 3286214 callbacks suppressed |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: avoid NULL pointer dereference
iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta
pointer is not NULL.
It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is
dereferencing the ieee80211_sta pointer.
If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL
pointer.
Fix this by checking the sta pointer before retrieving the mvmsta
from it. If sta is not NULL, then mvmsta isn't either. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn30_init_hw
This commit addresses a potential null pointer dereference issue in the
`dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.
The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for clk_mgr in dcn32_init_hw
This commit addresses a potential null pointer dereference issue in the
`dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is
null.
The fix adds a check to ensure `dc->clk_mgr` is not null before
accessing its functions. This prevents a potential null pointer
dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for function pointer in dcn20_set_output_transfer_func
This commit adds a null check for the set_output_gamma function pointer
in the dcn20_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null at line 1030, but then it
was being dereferenced without any null check at line 1048. This could
potentially lead to a null pointer dereference error if set_output_gamma
is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma at line 1048. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for function pointer in dcn32_set_output_transfer_func
This commit adds a null check for the set_output_gamma function pointer
in the dcn32_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null, but then it was being
dereferenced without any null check. This could lead to a null pointer
dereference if set_output_gamma is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Initialize denominators' default to 1
[WHAT & HOW]
Variables used as denominators and maybe not assigned to other values,
should not be 0. Change their default to 1 so they are never 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null-initialized variables
[WHAT & HOW]
drr_timing and subvp_pipe are initialized to null and they are not
always assigned new values. It is necessary to check for null before
dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check phantom_stream before it is used
dcn32_enable_phantom_stream can return null, so returned value
must be checked before used.
This fixes 1 NULL_RETURNS issue reported by Coverity. |
| REXML is an XML toolkit for Ruby. The REXML gem before 3.3.9 has a ReDoS vulnerability when it parses an XML that has many digits between &# and x...; in a hex numeric character reference (&#x...;). This does not happen with Ruby 3.2 or later. Ruby 3.1 is the only affected maintained Ruby. The REXML gem 3.3.9 or later include the patch to fix the vulnerability. |
| execute_filter_delta in archive_read_support_format_rar.c in libarchive before 3.7.5 allows out-of-bounds access via a crafted archive file because src can move beyond dst. |
| DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMPurify was vulnerable to prototype pollution. This vulnerability is fixed in 2.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in
node allocations") leads a NULL pointer deference in cache_set_flush().
1721 if (!IS_ERR_OR_NULL(c->root))
1722 list_add(&c->root->list, &c->btree_cache);
>From the above code in cache_set_flush(), if previous registration code
fails before allocating c->root, it is possible c->root is NULL as what
it is initialized. __bch_btree_node_alloc() never returns NULL but
c->root is possible to be NULL at above line 1721.
This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. |
| DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMpurify was vulnerable to nesting-based mXSS. This vulnerability is fixed in 2.5.0 and 3.1.3. |
| Vim is an open source, command line text editor. A use-after-free was found in Vim < 9.1.0764. When closing a buffer (visible in a window) a BufWinLeave auto command can cause an use-after-free if this auto command happens to re-open the same buffer in a new split window. Impact is low since the user must have intentionally set up such a strange auto command and run some buffer unload commands. However this may lead to a crash. This issue has been addressed in version 9.1.0764 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| An improper array index validation vulnerability exists in the nowindow functionality of OFFIS DCMTK 3.6.8. A specially crafted DICOM file can lead to an out-of-bounds write. An attacker can provide a malicious file to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't access invalid sched
Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
(cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7) |
