| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| oobabooga text-generation-webui trust_remote_code Reliance on Untrusted Inputs Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of oobabooga text-generation-webui. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the trust_remote_code parameter provided to the join endpoint. The issue results from the lack of proper validation of a user-supplied argument before using it to load a model. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-26681. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex
Apparently the hex passphrase mechanism does not work on newer
chips/firmware (e.g. BCM4387). It seems there was a simple way of
passing it in binary all along, so use that and avoid the hexification.
OpenBSD has been doing it like this from the beginning, so this should
work on all chips.
Also clear the structure before setting the PMK. This was leaking
uninitialized stack contents to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
md: raid1: fix potential OOB in raid1_remove_disk()
If rddev->raid_disk is greater than mddev->raid_disks, there will be
an out-of-bounds in raid1_remove_disk(). We have already found
similar reports as follows:
1) commit d17f744e883b ("md-raid10: fix KASAN warning")
2) commit 1ebc2cec0b7d ("dm raid: fix KASAN warning in raid5_remove_disk")
Fix this bug by checking whether the "number" variable is
valid. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
[ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246
[ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000
[ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000
[ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006
[ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390
[ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.167041] Call Trace:
[ 7283.167046] <TASK>
[ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu]
[ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.169464] pci_pm_freeze+0x54/0xc0 |
| In the Linux kernel, the following vulnerability has been resolved:
posix-timers: Ensure timer ID search-loop limit is valid
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock. |
| Aviatrix Controller versions prior to 7.1.4208, 7.2.5090, and 8.0.0 do not enforce rate limiting on password reset attempts, allowing adversaries to brute force guess the 6-digit password reset PIN |
| The CRM Perks – WordPress HelpDesk Integration – Zendesk, Freshdesk, HelpScout plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'crm-perks-tickets' shortcode in all versions up to, and including, 1.1.6 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The tbm-client from Chunghwa Telecom has an Arbitrary File vulnerability. The application sets up a simple local web server and provides APIs for communication with the target website. Due to the lack of CSRF protection in the APIs, unauthenticated remote attackers could use these APIs through phishing. Additionally, one of the APIs contains an Absolute Path Traversal vulnerability. Attackers can copy arbitrary files on the user's system and paste them into any path, which poses a potential risk of information leakage or could consume hard drive space by copying files in large volumes. |
| An arbitrary write vulnerability in Microsoft signed UEFI firmware allows for code execution of untrusted software. This allows an attacker to control its value, leading to arbitrary memory writes, including modification of critical firmware settings stored in NVRAM. Exploiting this vulnerability could enable security bypasses, persistence mechanisms, or full system compromise. |
| oobabooga text-generation-webui trust_remote_code Reliance on Untrusted Inputs Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of oobabooga text-generation-webui. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the trust_remote_code parameter provided to the load endpoint. The issue results from the lack of proper validation of a user-supplied argument before using it to load a model. An attacker can leverage this vulnerability to execute code in the context of the service account.
. Was ZDI-CAN-26680. |
| The education theme for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 3.6.10 via deserialization of untrusted input in the 'themerex_callback_view_more_posts' function. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| The The Anps Theme plugin plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 1.1.1. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. |
| Buffer Overflow vulnerability in NEXTU FLATA AX1500 Router v.1.0.2 allows a remote attacker to execute arbitrary code via the POST request handler component. |
| Cross-Site Request Forgery (CSRF) vulnerability in WPENGINE, INC. Advanced Custom Fields PRO.This issue affects Advanced Custom Fields PRO: from n/a before 6.3.2. |
| The Kubio AI Page Builder plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.5.1 via thekubio_hybrid_theme_load_template function. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| A flaw was found in Keycloak. Keycloak does not immediately enforce the disabling of the "Remember Me" realm setting on existing user sessions. Sessions created while "Remember Me" was active retain their extended session lifetime until they expire, overriding the administrator's recent security configuration change. This is a logic flaw in session management increases the potential window for successful session hijacking or unauthorized long-term access persistence. The flaw lies in the session expiration logic relying on the session-local "remember-me" flag without validating the current realm-level configuration. |
| Draytek devices Vigor 165/166 prior to v4.2.6 , Vigor 2620/LTE200 prior to v3.9.8.8, Vigor 2860/2925 prior to v3.9.7, Vigor 2862/2926 prior to v3.9.9.4, Vigor 2133/2762/2832 prior to v3.9.8, Vigor 2135/2765/2766 prior to v4.4.5.1, Vigor 2865/2866/2927 prior to v4.4.5.3, Vigor 2962/3910 prior to v4.3.2.7, Vigor 3912 prior to v4.3.5.2, and Vigor 2925 up to v3.9.6 were discovered to utilize insecure versions of the functions strcmp and memcmp, allowing attackers to possibly obtain sensitive information via timing attacks. |
| Draytek devices Vigor 165/166 prior to v4.2.6 , Vigor 2620/LTE200 prior to v3.9.8.8, Vigor 2860/2925 prior to v3.9.7, Vigor 2862/2926 prior to v3.9.9.4, Vigor 2133/2762/2832 prior to v3.9.8, Vigor 2135/2765/2766 prior to v4.4.5.1, Vigor 2865/2866/2927 prior to v4.4.5.3, Vigor 2962/3910 prior to v4.3.2.7, Vigor 3912 prior to v4.3.5.2, and Vigor 2925 up to v3.9.6 were discovered to store passwords in plaintext. |
| Cross Site Scripting vulnerability in Automatic Systems Maintenance SlimLane 29565_d74ecce0c1081d50546db573a499941b10799fb7 allows a remote attacker to escalate privileges via the FtpConfig.php component. |
| Statmatic is a Laravel and Git powered content management system (CMS). Prior to version 5.17.0, assets uploaded with appropriately crafted filenames may result in them being placed in a location different than what was configured. The issue affects front-end forms with `assets` fields and other places where assets can be uploaded, although users would need upload permissions anyway. Files can be uploaded so they would be located on the server in a different location, and potentially override existing files. Traversal outside an asset container is not possible. This path traversal vulnerability has been fixed in 5.17.0. |
