| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An attacker with viewer permissions in Looker could craft a malicious URL that, when opened by a Looker admin, would execute an attacker-supplied script. Exploitation required at least one Looker extension installed on the instance.
Looker-hosted and Self-hosted were found to be vulnerable.
This issue has already been mitigated for Looker-hosted instances. No user action is required for these.
Self-hosted instances must be upgraded as soon as possible. This vulnerability has been patched in all supported versions of Self-hosted.
The versions below have all been updated to protect from this vulnerability. You can download these versions at the Looker download page https://download.looker.com/ : * 24.18.201+
* 25.0.79+
* 25.6.66+
* 25.12.7+
* 25.16.0+
* 25.18.0+
* 25.20.0+ |
| A vulnerability was found in lKinderBueno Streamity Xtream IPTV Player up to 2.8. The impacted element is an unknown function of the file public/proxy.php. Performing manipulation results in server-side request forgery. The attack can be initiated remotely. The exploit has been made public and could be used. Upgrading to version 2.8.1 is sufficient to resolve this issue. The patch is named c70bfb8d36b47bfd64c5ec73917e1d9ddb97af92. It is suggested to upgrade the affected component. |
| golang-jwt is a Go implementation of JSON Web Tokens. Starting in version 3.2.0 and prior to versions 5.2.2 and 4.5.2, the function parse.ParseUnverified splits (via a call to strings.Split) its argument (which is untrusted data) on periods. As a result, in the face of a malicious request whose Authorization header consists of Bearer followed by many period characters, a call to that function incurs allocations to the tune of O(n) bytes (where n stands for the length of the function's argument), with a constant factor of about 16. This issue is fixed in 5.2.2 and 4.5.2. |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. |
| A logic error exists in the Falcon sensor for Windows that could allow an attacker, with the prior ability to execute code on a host, to delete arbitrary files. CrowdStrike released a security fix for this issue in Falcon sensor for Windows versions 7.24 and above and all Long Term Visibility (LTV) sensors.
There is no indication of exploitation of these issues in the wild. Our threat hunting and intelligence teams are actively monitoring for exploitation and we maintain visibility into any such attempts.
The Falcon sensor for Mac, the Falcon sensor for Linux and the Falcon sensor for Legacy Systems are not impacted by this.
CrowdStrike was made aware of this issue through our HackerOne bug bounty program. It was discovered by Cong Cheng and responsibly disclosed. |
| A vulnerability, which was classified as problematic, has been found in fossasia open-event-server 1.19.1. This issue affects the function send_email_change_user_email of the file /fossasia/open-event-server/blob/development/app/api/helpers/mail.py of the component Mail Verification Handler. The manipulation leads to reliance on obfuscation or encryption of security-relevant inputs without integrity checking. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Project Gardener implements the automated management and operation of Kubernetes clusters as a service. Code injection may be possible in Gardener Extensions for AWS providers prior to version 1.64.0, Azure providers prior to version 1.55.0, OpenStack providers prior to version 1.49.0, and GCP providers prior to version 1.46.0. This vulnerability could allow a user with administrative privileges for a Gardener project to obtain control over the seed cluster where the shoot cluster is managed. This affects all Gardener installations where Terraformer is used/can be enabled for infrastructure provisioning with any of the affected components. This issue has been patched in Gardener Extensions for AWS providers version 1.64.0, Azure providers version 1.55.0, OpenStack providers version 1.49.0, and GCP providers version 1.46.0. |
| pyquokka is a framework for making data lakes work for time series. In versions 0.3.1 and prior, the FlightServer class directly uses pickle.loads() to deserialize action bodies received from Flight clients without any sanitization or validation in the do_action() method. The vulnerable code is located in pyquokka/flight.py at line 283 where arbitrary data from Flight clients is directly passed to pickle.loads(). When FlightServer is configured to listen on 0.0.0.0, this allows attackers across the entire network to perform arbitrary remote code execution by sending malicious pickled payloads through the set_configs action. Additional vulnerability points exist in the cache_garbage_collect, do_put, and do_get functions where pickle.loads is used to deserialize untrusted remote data. |
| KEDA is a Kubernetes-based Event Driven Autoscaling component. Prior to versions 2.17.3 and 2.18.3, an Arbitrary File Read vulnerability has been identified in KEDA, potentially affecting any KEDA resource that uses TriggerAuthentication to configure HashiCorp Vault authentication. The vulnerability stems from an incorrect or insufficient path validation when loading the Service Account Token specified in spec.hashiCorpVault.credential.serviceAccount. An attacker with permissions to create or modify a TriggerAuthentication resource can exfiltrate the content of any file from the node's filesystem (where the KEDA pod resides) by directing the file's content to a server under their control, as part of the Vault authentication request. The potential impact includes the exfiltration of sensitive system information, such as secrets, keys, or the content of files like /etc/passwd. This issue has been patched in versions 2.17.3 and 2.18.3. |
| The Miniorange OTP Verification with Firebase plugin for WordPress is vulnerable to privilege escalation due to a missing capability check on the 'handle_mofirebase_form_options' function in versions 3.1.0 to 3.6.2. This makes it possible for unauthenticated attackers to update the default role to Administrator. Premium features must be enabled in order to exploit the vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.
To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:
1. It must have it's logical start immediately to the left of
(ie less than) original logical start.
2. It must not be deleted
To find this pa we use the following traversal method:
1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.
2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.
3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.
4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.
This approach also takes care of having deleted PAs in the tree.
(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)
[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
loop: loop_set_status_from_info() check before assignment
In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should
be checked before reassignment, because if an overflow error occurs, the
original correct value will be changed to the wrong value, and it will not
be changed back.
More, the original patch did not solve the problem, the value was set and
ioctl returned an error, but the subsequent io used the value in the loop
driver, which still caused an alarm:
loop_handle_cmd
do_req_filebacked
loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
lo_rw_aio
cmd->iocb.ki_pos = pos |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720
("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by
updating kcm_tx_msg(head)->last_skb if partial data is copied so that the
following sendmsg() will resume from the skb.
However, we cannot know how many bytes were copied when we get the error.
Thus, we could mess up the MSG_MORE queue.
When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we
do so for UDP by udp_flush_pending_frames().
Even without this change, when the error occurred, the following sendmsg()
resumed from a wrong skb and the queue was messed up. However, we have
yet to get such a report, and only syzkaller stumbled on it. So, this
can be changed safely.
Note this does not change SOCK_SEQPACKET behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix null-ptr-deref in raid10_sync_request
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:
power-sensor@40 {
compatible = "ti,ina232", "ti,ina231";
...
};
Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.
Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix NULL-deref on snapshot tear down
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Patchwork: https://patchwork.freedesktop.org/patch/525099/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject negative ifindex
Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:
$ ./cli.py --spec netlink/specs/ovs_datapath.yaml \
--do new \
--json '{"upcall-pid": 1, "name":"my-dp"}'
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...
Validate the inputs. Now the second command correctly returns:
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
lib.ynl.NlError: Netlink error: Numerical result out of range
nl_len = 108 (92) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'}
Accept 0 since it used to be silently ignored. |
| A vulnerability was identified in SapneshNaik Student Management System up to f4b4f0928f0b5551a28ee81ae7e7fe47d9345318. This impacts an unknown function of the file index.php. Such manipulation of the argument Error leads to cross site scripting. The attack can be launched remotely. The exploit is publicly available and might be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| Project Pier 0.8.8 and earlier contains an unauthenticated arbitrary file upload vulnerability in tools/upload_file.php. The upload handler fails to validate the file type or enforce authentication, allowing remote attackers to upload malicious PHP files directly into a web-accessible directory. The uploaded file is stored with a predictable suffix and can be executed by requesting its URL, resulting in remote code execution. |
| A stack-based buffer overflow vulnerability exists in ActFax Server version 4.32, specifically in the "Import Users from File" functionality of the client interface. The application fails to properly validate the length of tab-delimited fields in .exp files, leading to unsafe usage of strcpy() during CSV parsing. An attacker can exploit this vulnerability by crafting a malicious .exp file and importing it using the default character set "ECMA-94 / Latin 1 (ISO 8859)". Successful exploitation may result in arbitrary code execution, leading to full system compromise. User interaction is required to trigger the vulnerability. |
