| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
[Cc stable] |
| A malicious actor can access camera configuration information, including account credentials, without authenticating when accessing a vulnerable URL. |
| Certain models of routers from Billion Electric has hard-coded embedded linux credentials, allowing attackers to log in through the SSH service using these credentials and obtain root privilege of the system. |
| School Affairs System from Quanxun has an Exposure of Sensitive Information, allowing unauthenticated attackers to view specific pages and obtain database information as well as plaintext administrator credentials. |
| NetVision Information ISOinsight has a Reflected Cross-site Scripting vulnerability, allowing unauthenticated remote attackers to execute arbitrary JavaScript code in the user's browser through phishing techniques. |
| A vulnerability was found in TRENDnet TI-G102i 1.0.7.S0_ /1.0.8.S0_ and classified as problematic. This issue affects the function plugins_call_handle_uri_raw of the file /usr/sbin/lighttpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Profession Fit 5.0.99 Build 44910 allows authorization bypass via a direct request for /api/challenges/{id} and also URLs for eversports, the user-management page, and the plane page. |
| A vulnerability classified as problematic was found in opensolon up to 3.1.0. This vulnerability affects the function render_mav of the file /aa of the component org.noear.solon.core.handle.RenderManager. The manipulation of the argument template with the input ../org/example/HelloApp.class leads to path traversal: '../filedir'. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| SAP Field Logistics Manage Logistics application OData meta-data property is vulnerable to data tampering, due to which certain fields could be externally modified by an attacker causing low impact on integrity of the application. Confidentiality and availability are not impacted. |
| Bypass vulnerability in the authentication method in the GTT Tax Information System application, related to the Active Directory (LDAP) login method.
Authentication is performed through a local WebSocket, but the web application does not properly validate the authenticity or origin of the data received, allowing an attacker with access to the local machine or internal network to impersonate the legitimate WebSocket and inject manipulated information.
Exploiting this vulnerability could allow an attacker to authenticate as any user in the domain, without the need for valid credentials, compromising the confidentiality, integrity, and availability of the application and its data. |
| A command injection vulnerability exists in LILIN Digital Video Recorder (DVR) devices prior to firmware version 2.0b60_20200207 due to insufficient sanitization of the FTP and NTP Server fields in the service configuration. An attacker with access to the configuration interface can upload a malicious XML file with injected shell commands in these fields. Upon subsequent configuration syncs, these commands are executed with elevated privileges. This vulnerability was exploited in the wild by the Moobot botnets. |
| An information disclosure vulnerability in M-Files Server before versions 25.12.15491.7, 25.8 LTS SR3, 25.2 LTS SR3 and 24.8 LTS SR5 allows an authenticated attacker using M-Files Web to capture session tokens of other active users. |
| The Ocean Modal Window WordPress plugin before 2.3.3 is vulnerable to Remote Code Execution via the modal display logic. These modals can be displayed under user-controlled conditions that Editors and Administrators can set (edit_pages capability). The conditions are then executed as part of an eval statement executed on every site page. This leads to remote code execution. |
| The HTML5 Audio Player – The Ultimate No-Code Podcast, MP3 & Audio Player plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions from 2.4.0 up to, and including, 2.5.1 via the getIcyMetadata() function. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| A vulnerability was found in Synway SMG Gateway Management Software up to 20250204. It has been rated as critical. This issue affects some unknown processing of the file 9-12ping.php. The manipulation of the argument retry leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in kubevirt. A user within a virtual machine (VM), if the guest agent is active, can exploit this by causing the agent to report an excessive number of network interfaces. This action can overwhelm the system's ability to store VM configuration updates, effectively blocking changes to the Virtual Machine Instance (VMI). This allows the VM user to restrict the VM administrator's ability to manage the VM, leading to a denial of service for administrative operations. |
| SQL injection vulnerability in Prevengos v2.44 by Nedatec Consulting. This vulnerability allows an attacker to retrieve, create, update, and delete databases by sending a POST request using the parameters “mpsCentroin”, “mpsEmpresa”, “mpsProyecto”, and “mpsContrata” in “/servicios/autorizaciones.asmx/mfsRecuperarListado”. |
| Improper input sanitization in the file archives upload functionality of Eaton Galileo software allows traversing paths which could lead into an attacker with local access to execute unauthorized code or commands. This security issue has been fixed in the latest version of Galileo which is available on the Eaton download center. |
| A vulnerability, which was classified as critical, has been found in Baiyi Cloud Asset Management System up to 20250204. This issue affects some unknown processing of the file /wuser/admin.house.collect.php. The manipulation of the argument project_id leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
Mapping TPM TIS with req_type = 0
WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460
Modules linked in:
CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025
RIP: 0010:memtype_reserve+0x2ab/0x460
__ioremap_caller+0x16d/0x3d0
ioremap_cache+0x17/0x30
x86_acpi_os_ioremap+0xe/0x20
acpi_os_map_iomem+0x1f3/0x240
acpi_os_map_memory+0xe/0x20
acpi_ex_system_memory_space_handler+0x273/0x440
acpi_ev_address_space_dispatch+0x176/0x4c0
acpi_ex_access_region+0x2ad/0x530
acpi_ex_field_datum_io+0xa2/0x4f0
acpi_ex_extract_from_field+0x296/0x3e0
acpi_ex_read_data_from_field+0xd1/0x460
acpi_ex_resolve_node_to_value+0x2ee/0x530
acpi_ex_resolve_to_value+0x1f2/0x540
acpi_ds_evaluate_name_path+0x11b/0x190
acpi_ds_exec_end_op+0x456/0x960
acpi_ps_parse_loop+0x27a/0xa50
acpi_ps_parse_aml+0x226/0x600
acpi_ps_execute_method+0x172/0x3e0
acpi_ns_evaluate+0x175/0x5f0
acpi_evaluate_object+0x213/0x490
acpi_evaluate_integer+0x6d/0x140
acpi_bus_get_status+0x93/0x150
acpi_add_single_object+0x43a/0x7c0
acpi_bus_check_add+0x149/0x3a0
acpi_bus_check_add_1+0x16/0x30
acpi_ns_walk_namespace+0x22c/0x360
acpi_walk_namespace+0x15c/0x170
acpi_bus_scan+0x1dd/0x200
acpi_scan_init+0xe5/0x2b0
acpi_init+0x264/0x5b0
do_one_i
---truncated--- |
