| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An improper validation of integrity check value vulnerability exists in
AVEVA PI Connector for CygNet Versions 1.6.14 and prior that, if exploited,
could allow a miscreant with elevated privileges to modify PI Connector
for CygNet local data files (cache and buffers) in a way that causes the
connector service to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
The original code uses cancel_delayed_work() in flexcop_pci_remove(), which
does not guarantee that the delayed work item irq_check_work has fully
completed if it was already running. This leads to use-after-free scenarios
where flexcop_pci_remove() may free the flexcop_device while irq_check_work
is still active and attempts to dereference the device.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
flexcop_pci_remove() | flexcop_pci_irq_check_work()
cancel_delayed_work() |
flexcop_device_kfree(fc_pci->fc_dev) |
| fc = fc_pci->fc_dev; // UAF
This is confirmed by a KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff8880093aa8c8 by task bash/135
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_noprof+0x1be/0x460
flexcop_device_kmalloc+0x54/0xe0
flexcop_pci_probe+0x1f/0x9d0
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 135:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
flexcop_device_kfree+0x32/0x50
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing delayed
work has finished before the device memory is deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced
artificial delays within the flexcop_pci_irq_check_work() function to
increase the likelihood of triggering the bug. |
| A vulnerability in the users configuration file of ctrlX OS may allow a remote authenticated (low-privileged) attacker to recover the plaintext passwords of other users. |
| A vulnerability in the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to induce a Denial-of-Service (DoS) condition on the device via multiple crafted HTTP requests. In the worst case, a full power cycle is needed to regain control of the device. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: essiv - Check ssize for decryption and in-place encryption
Move the ssize check to the start in essiv_aead_crypt so that
it's also checked for decryption and in-place encryption. |
| A vulnerability in the error notification messages of the web application of ctrlX OS allows a remote unauthenticated attacker to inject arbitrary HTML tags and, possibly, execute arbitrary client-side code in the context of another user's browser via a crafted HTTP request. |
| A vulnerability in the “Hosts” functionality of the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to manipulate the “hosts” file in an unintended manner via a crafted HTTP request. |
| A vulnerability in the “Proxy” functionality of the web application of ctrlX OS allows a remote authenticated (lowprivileged) attacker to manipulate the “/etc/environment” file via a crafted HTTP request. |
| The Bootstrap Blocks for WP Editor v2 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'gtb-bootstrap/column' block in all versions up to, and including, 2.5.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it. |
| The Enable Accessibility plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg & remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 1.4.1. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| A vulnerability in the “Network Interfaces” functionality of the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to manipulate the network configuration file via a crafted HTTP request. |
| A vulnerability in the “Network Interfaces” functionality of the web application of ctrlX OS allows a remote authenticated (lowprivileged) attacker to delete the configuration of physical network interfaces via a crafted HTTP request. |
| The Estatik Mortgage Calculator plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'color' parameter in all versions up to, and including, 2.0.11 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| Updatecli is a tool used to apply file update strategies. Prior to version 0.93.0, private maven repository credentials may be leaked in application logs in case of unsuccessful retrieval operation. During the execution of an updatecli pipeline which contains a `maven` source configured with basic auth credentials, the credentials are being leaked in the application execution logs in case of failure. Credentials are properly sanitized when the operation is successful but not when for whatever reason there is a failure in the maven repository, e.g. wrong coordinates provided, not existing artifact or version. Version 0.93.0 contains a patch for the issue. |
| In some circumstances, debug artifacts uploaded by the CodeQL Action after a failed code scanning workflow run may contain the environment variables from the workflow run, including any secrets that were exposed as environment variables to the workflow. Users with read access to the repository would be able to access this artifact, containing any secrets from the environment. This vulnerability is patched in CodeQL Action version 3.28.3 or later, or CodeQL CLI version 2.20.3 or later.
For some affected workflow runs, the exposed environment variables in the debug artifacts included a valid `GITHUB_TOKEN` for the workflow run, which has access to the repository in which the workflow ran, and all the permissions specified in the workflow or job. The `GITHUB_TOKEN` is valid until the job completes or 24 hours has elapsed, whichever comes first.
Environment variables are exposed only from workflow runs that satisfy all of the following conditions:
- Code scanning workflow configured to scan the Java/Kotlin languages.
- Running in a repository containing Kotlin source code.
- Running with debug artifacts enabled.
- Using CodeQL Action versions <= 3.28.2, and CodeQL CLI versions >= 2.9.2 (May 2022) and <= 2.20.2.
- The workflow run fails before the CodeQL database is finalized within the `github/codeql-action/analyze` step.
- Running in any GitHub environment: GitHub.com, GitHub Enterprise Cloud, and GitHub Enterprise Server. Note: artifacts are only accessible to users within the same GitHub environment with access to the scanned repo.
The `GITHUB_TOKEN` exposed in this way would only have been valid for workflow runs that satisfy all of the following conditions, in addition to the conditions above:
- Using CodeQL Action versions >= 3.26.11 (October 2024) and <= 3.28.2, or >= 2.26.11 and < 3.
- Running in GitHub.com or GitHub Enterprise Cloud only (not valid on GitHub Enterprise Server).
In rare cases during advanced setup, logging of environment variables may also occur during database creation of Java, Swift, and C/C++. Please read the corresponding CodeQL CLI advisory GHSA-gqh3-9prg-j95m for more details.
In CodeQL CLI versions >= 2.9.2 and <= 2.20.2, the CodeQL Kotlin extractor logs all environment variables by default into an intermediate file during the process of creating a CodeQL database for Kotlin code. This is a part of the CodeQL CLI and is invoked by the CodeQL Action for analyzing Kotlin repositories.
On Actions, the environment variables logged include GITHUB_TOKEN, which grants permissions to the repository being scanned.
The intermediate file containing environment variables is deleted when finalizing the database, so it is not included in a successfully created database. It is, however, included in the debug artifact that is uploaded on a failed analysis run if the CodeQL Action was invoked in debug mode.
Therefore, under these specific circumstances (incomplete database creation using the CodeQL Action in debug mode) an attacker with access to the debug artifact would gain unauthorized access to repository secrets from the environment, including both the `GITHUB_TOKEN` and any user-configured secrets made available via environment variables.
The impact of the `GITHUB_TOKEN` leaked in this environment is limited:
- For workflows on GitHub.com and GitHub Enterprise Cloud using CodeQL Action versions >= 3.26.11 and <= 3.28.2, or >= 2.26.11 and < 3, which in turn use the `actions/artifacts v4` library, the debug artifact is uploaded before the workflow job completes. During this time the `GITHUB_TOKEN` is still valid, providing an opportunity for attackers to gain access to the repository.
- For all other workflows, the debug artifact is uploaded after the workflow job completes, at which point the leaked `GITHUB_TOKEN` has been revoked and cannot be used to access the repository. |
| A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V10.0), SIPROTEC 5 6MD85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 6MD86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 6MD89 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 6MU85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7KE85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SA82 (CP150) (All versions < V10.0), SIPROTEC 5 7SA86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SA87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SD82 (CP150) (All versions < V10.0), SIPROTEC 5 7SD86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SD87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SJ81 (CP150) (All versions < V10.0), SIPROTEC 5 7SJ82 (CP150) (All versions < V10.0), SIPROTEC 5 7SJ85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SJ86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SK82 (CP150) (All versions < V10.0), SIPROTEC 5 7SK85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SL82 (CP150) (All versions < V10.0), SIPROTEC 5 7SL86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SL87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SS85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7ST85 (CP300) (All versions < V10.0), SIPROTEC 5 7ST86 (CP300) (All versions < V10.0), SIPROTEC 5 7SX82 (CP150) (All versions < V10.0), SIPROTEC 5 7SX85 (CP300) (All versions < V10.0), SIPROTEC 5 7SY82 (CP150) (All versions < V10.0), SIPROTEC 5 7UM85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7UT82 (CP150) (All versions < V10.0), SIPROTEC 5 7UT85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7UT86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7UT87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7VE85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7VK87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7VU85 (CP300) (All versions < V10.0), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V10.0). Affected devices do not properly limit the bandwidth for incoming network packets over their local USB port. This could allow an attacker with physical access to send specially crafted packets with high bandwidth to the affected devices thus forcing them to exhaust their memory and stop responding to any network traffic via the local USB port. Affected devices reset themselves automatically after a successful attack. The protection function is not affected of this vulnerability. |
| A vulnerability has been identified in SIMOTION SCOUT TIA V5.4 (All versions), SIMOTION SCOUT TIA V5.5 (All versions), SIMOTION SCOUT TIA V5.6 (All versions < V5.6 SP1 HF7), SIMOTION SCOUT TIA V5.7 (All versions < V5.7 SP1 HF1), SIMOTION SCOUT V5.4 (All versions), SIMOTION SCOUT V5.5 (All versions), SIMOTION SCOUT V5.6 (All versions < V5.6 SP1 HF7), SIMOTION SCOUT V5.7 (All versions < V5.7 SP1 HF1), SINAMICS STARTER V5.5 (All versions), SINAMICS STARTER V5.6 (All versions), SINAMICS STARTER V5.7 (All versions < V5.7 HF2). The affected application contains a XML External Entity Injection (XXE) vulnerability while parsing specially crafted XML files. This could allow an attacker to read arbitrary files in the system. |
| The Elementor Addons AI Addons – 70 Widgets, Premium Templates, Ultimate Elements plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 2.2.1 via the render function due to insufficient restrictions on which templates can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private or draft templates that they should not have access to. |
| A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions), RUGGEDCOM ROX MX5000RE (All versions), RUGGEDCOM ROX RX1400 (All versions), RUGGEDCOM ROX RX1500 (All versions), RUGGEDCOM ROX RX1501 (All versions), RUGGEDCOM ROX RX1510 (All versions), RUGGEDCOM ROX RX1511 (All versions), RUGGEDCOM ROX RX1512 (All versions), RUGGEDCOM ROX RX1524 (All versions), RUGGEDCOM ROX RX1536 (All versions), RUGGEDCOM ROX RX5000 (All versions). Affected devices do not properly limit access through its Built-In-Self-Test (BIST) mode.
This could allow an attacker with physical access to the serial interface to bypass authentication and get access to a root shell on the device. |