| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Validation of Certificate with Host Mismatch vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to protection mechanism bypass. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| A flaw was found in odh-dashboard in Red Hat OpenShift AI. The backend-for-frontend route GET /api/nim-serving/:nimResource reads Kubernetes Secrets using the dashboard service account and returns the full Secret object, including .data, without an authorization check. Any authenticated dashboard user can retrieve the cluster NVIDIA NGC API key Secret (apiKeySecret) and the NIM image pull secret (nimPullSecret). Create and delete of the same NIM credential are admin-gated; the read path is not. This is missing authorization (CWE-862) and insufficiently protected credentials (CWE-522). It is distinct from CVE-2026-5483 (service-account token leak in the Kubernetes client response wrapper on the same route) and CVE-2026-16456 (odh-model-controller cross-namespace confused deputy). |
| Net::IP::LPM versions before 1.11 for Perl allow a heap out-of-bounds read via an unbounded prefix length.
add() passes the prefix string to the trie builder addPrefixToTrie() without checking it against the address width.
addPrefixToTrie() then walks the prefix buffer by prefix_length bits, reading prefix[byte] for byte up to prefix_len/8, where prefix is the 4-byte (IPv4) or 16-byte (IPv6) packed address. A prefix length greater than 32 for IPv4 or 128 for IPv6, for example add("1.2.3.4/255", $v) or add("2001:db8::/255", $v), reads past the end of the packed address.
The out-of-bounds read happens during trie construction and is bounded: the prefix length is stored as an unsigned char, so the bit walk reads at most 32 bytes from the start of the packed address, a short distance past the end of the 4-byte or 16-byte buffer. It is detectable under AddressSanitizer, valgrind, or a hardened allocator, where it can abort the process. Lookups and dump() format only the valid address width, so the out-of-bounds bytes are not exposed through the module's API. |
| Net::IP::LPM version 1.10 for Perl does not properly consider leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses.
Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Cleartext Storage of Sensitive Information vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to information exposure. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Locking vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to filesystem access for attacker. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Plaintext Storage of a Password vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to information disclosure. |
| ImageMagick before 7.1.2-30 contains a time-of-check-time-of-use vulnerability in path policy enforcement on Windows that allows attackers to bypass read or write restrictions by exploiting symlink race conditions. Attackers can swap symlinks between policy validation and file access to read or write policy-denied files. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Incorrect Permission Assignment for Critical Resource vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to unauthorized access. |
| In Power HAL, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11165543; Issue ID: MSV-9011. |
| ImageMagick before 7.1.2-30 and 6.9.x before 6.9.13-55 contains a heap-use-after-free vulnerability in the Layer method of PerlMagick. An attacker who supplies a crafted list of images can trigger memory access after deallocation, resulting in a crash (denial of service). |
| Buffer Overflow vulnerability in Ffmpeg v.7.0 and after allows an attacker to cause a denial of service via the libavformat/iamf_writer.c component |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to protection mechanism bypass. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Use of Hard-coded Cryptographic Key vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: wait for FR_FINISHED on abort_on_kill to prevent use-after-free
The abort_on_kill path in request_wait_answer() calls fuse_abort_conn()
and returns without waiting for FR_FINISHED. If fuse_dev_do_write() is
concurrently processing the same request (FR_LOCKED set), the caller
frees req->args while it is still being accessed, causing a
use-after-free.
Fix this by jumping to the existing wait_event(FR_FINISHED) instead of
returning early. The wait will not hang because fuse_abort_conn()
ensures all requests are ended. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ss - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: run deferred work on a module-owned workqueue
ovpn queues several work items whose callbacks execute module text.
These works currently run on the global system workqueues, so module
exit has no driver-owned drain point that guarantees the callbacks have
fully returned before the module text can be freed.
Object references protect the objects used by the callbacks, but they do
not prove that a workqueue function has returned. In particular, a
worker can drop the final reference that unblocks device teardown while
it is still executing ovpn code.
Add a module-owned workqueue and queue all ovpn work items on it. During
module exit, unregister rtnl and netlink first, flush the workqueue so
ordinary ovpn workers finish, run the final RCU barrier, and destroy the
workqueue last. This keeps the workqueue available for cleanup work
queued from RCU callbacks, while ensuring no ovpn work item can outlive
the module text.
The per-device delayed keepalive work remains explicitly disabled during
netdev teardown (disable_delayed_work_sync in ndo_uninit), since
flush_workqueue does not flush delayed work that is still only pending
on its timer. |
