| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An incorrect permissions vulnerability was reported in Elliptic Labs Virtual Lock Sensor that could allow a local, authenticated user to escalate privileges. |
| Better Auth is an authentication and authorization library for TypeScript. An open redirect has been found in the originCheck middleware function, which affects the following routes: /verify-email, /reset-password/:token, /delete-user/callback, /magic-link/verify, /oauth-proxy-callback. This vulnerability is fixed in 1.2.10. |
| `gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue.
In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original.
On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors. |
| NVIDIA Mellanox DPDK contains a vulnerability in Poll Mode Driver (PMD), where an attacker on a VM in the system might be able to cause information disclosure and denial of service on the network interface. |
| NVIDIA Display Driver contains a vulnerability where an uncontrolled DLL loading path might lead to arbitrary denial of service, escalation of privileges, code execution, and data tampering. |
| Khoj is a self-hostable artificial intelligence app. Prior to version 1.29.10, an Insecure Direct Object Reference (IDOR) vulnerability in the update_subscription endpoint allows any authenticated user to manipulate other users' Stripe subscriptions by simply modifying the email parameter in the request. The vulnerability exists in the subscription endpoint at `/api/subscription`. The endpoint uses an email parameter as a direct reference to user subscriptions without verifying object ownership. While authentication is required, there is no authorization check to verify if the authenticated user owns the referenced subscription. The issue was fixed in version 1.29.10. Support for arbitrarily presenting an email for update has been deprecated. |
| NVIDIA Display Driver for Linux contains a vulnerability where an attacker might be able to trigger a null pointer dereference. A successful exploit of this vulnerability might lead to denial of service. |
| free-one-api allows users to access large language model reverse engineering libraries through the standard OpenAI API format. In versions up to and including 1.0.1, MD5 is used to hash passwords before sending them to the backend. MD5 is a cryptographically broken hashing algorithm and is no longer considered secure for password storage or transmission. It is vulnerable to collision attacks and can be easily cracked using modern hardware, exposing user credentials to potential compromise. As of time of publication, a replacement for MD5 has not been committed to the free-one-api GitHub repository. |
| Firecrawl is a web scraper that allows users to extract the content of a webpage for a large language model. Versions prior to 1.1.1 contain a server-side request forgery (SSRF) vulnerability. The scraping engine could be exploited by crafting a malicious site that redirects to a local IP address. This allowed exfiltration of local network resources through the API. The cloud service was patched on December 27th, 2024, and the maintainers have checked that no user data was exposed by this vulnerability. Scraping engines used in the open sourced version of Firecrawl were patched on December 29th, 2024, except for the playwright services which the maintainers have determined to be un-patchable. All users of open-source software (OSS) Firecrawl should upgrade to v1.1.1. As a workaround, OSS Firecrawl users should supply the playwright services with a secure proxy. A proxy can be specified through the `PROXY_SERVER` env in the environment variables. Please refer to the documentation for instructions. Ensure that the proxy server one is using is setup to block all traffic going to link-local IP addresses. |
| FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions prior to 16.0.92 for FreePBX 16 and versions prior to 17.0.6 for FreePBX 17, the Endpoint Manager module contains authenticated SQL injection vulnerabilities affecting multiple parameters in the basestation, model, firmware, and custom extension configuration functionality areas. Authentication with a known username is required to exploit these vulnerabilities. Successful exploitation allows authenticated users to execute arbitrary SQL queries against the database, potentially enabling access to sensitive data or modification of database contents. This issue has been patched in version 16.0.92 for FreePBX 16 and version 17.0.6 for FreePBX 17. |
| FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions prior to 16.0.92 for FreePBX 16 and versions prior to 17.0.6 for FreePBX 17, the Endpoint Manager module contains an authenticated arbitrary file upload vulnerability affecting the fwbrand parameter. The fwbrand parameter allows an attacker to change the file path. Combined, these issues can result in a webshell being uploaded. Authentication with a known username is required to exploit this vulnerability. Successful exploitation allows authenticated users to upload arbitrary files to attacker-controlled paths on the server, potentially leading to remote code execution. This issue has been patched in version 16.0.92 for FreePBX 16 and version 17.0.6 for FreePBX 17. |
| An issue was discovered in Prevx v3.0.5.220 allowing attackers to cause a denial of service via sending IOCTL code 0x22E044 to the pxscan.sys driver. Any processes listed under registry key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\pxscan\Files will be terminated. |
| A flaw has been found in JackieDYH Resume-management-system up to fb6b857d852dd796e748ce30c606fe5e61c18273. Affected by this issue is some unknown functionality of the file /admin/show.php. This manipulation of the argument userid causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| Use of Default Credentials vulnerability in Maruti Suzuki SmartPlay on Linux (Infotainment Hub modules) allows attacker to try common or default usernames and passwords.The issue was detected on a 2022 Maruti Suzuki Brezza in India Market.
This issue affects SmartPlay: 66T0.05.50. |
| The Calendar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'event_desc' parameter in all versions up to, and including, 1.3.16 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page, granted they can convince an administrator to enable lower privilege users to manage calendar events via the plugin settings. |
| NVIDIA Display Driver for Linux contains a vulnerability in a kernel module, where an attacker might be able to trigger a null pointer deference. A successful exploit of this vulnerability might lead to denial of service. |
| Home Assistant is open source home automation software that puts local control and privacy first. In versions 2025.1.0 through 2025.10.1, the energy dashboard is vulnerable to stored cross-site scripting. An authenticated user can inject malicious JavaScript code into an energy entity's name field, which is then executed when any user hovers over data points in the energy dashboard graph tooltips. The vulnerability exists because entity names containing HTML are not properly sanitized before being rendered in graph tooltips. This could allow an attacker with authentication to execute arbitrary JavaScript in the context of other users' sessions. Additionally, if an energy provider (such as Tibber) supplies a malicious default name for an entity, the vulnerability can be exploited without direct user action when the default name is used. This issue has been patched in version 2025.10.2. No known workarounds exist. |
| Parse Javascript SDK provides access to the powerful Parse Server backend from your JavaScript app. Prior to 7.0.0, injection of malicious payload allows attacker to remotely execute arbitrary code. ParseObject.fromJSON, ParseObject.pin, ParseObject.registerSubclass, ObjectStateMutations (internal), and encode/decode (internal) are affected. This vulnerability is fixed in 7.0.0. |
| A path traversal in StarNet Communications Corporation FastX v.4 through v4.1.51 allows unauthenticated attackers to read arbitrary files. |
| This CVE affects only Windows worker nodes. Your worker node is vulnerable to this issue if it is running one of the affected versions listed below. |
