| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Do not validate SSPP when it is not ready
Current code will validate current plane and previous plane to
confirm they can share a SSPP with multi-rect mode. The SSPP
is already allocated for previous plane, while current plane
is not associated with any SSPP yet. Null pointer is referenced
when validating the SSPP of current plane. Skip SSPP validation
for current plane.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: SM8650 EV1 rev1 4slam 2et (DT)
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : dpu_plane_is_multirect_capable+0x68/0x90
lr : dpu_assign_plane_resources+0x288/0x410
sp : ffff800093dcb770
x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000
x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800
x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080
x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff
x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200
x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000
x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950
x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438
x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000
Call trace:
dpu_plane_is_multirect_capable+0x68/0x90 (P)
dpu_crtc_atomic_check+0x5bc/0x650
drm_atomic_helper_check_planes+0x13c/0x220
drm_atomic_helper_check+0x58/0xb8
msm_atomic_check+0xd8/0xf0
drm_atomic_check_only+0x4a8/0x968
drm_atomic_commit+0x50/0xd8
drm_atomic_helper_update_plane+0x140/0x188
__setplane_atomic+0xfc/0x148
drm_mode_setplane+0x164/0x378
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xbc/0xf8
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x144/0x168
el0t_64_sync+0x198/0x1a0
Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1)
---[ end trace 0000000000000000 ]---
Patchwork: https://patchwork.freedesktop.org/patch/669224/ |
| In some circumstances, debug artifacts uploaded by the CodeQL Action after a failed code scanning workflow run may contain the environment variables from the workflow run, including any secrets that were exposed as environment variables to the workflow. Users with read access to the repository would be able to access this artifact, containing any secrets from the environment. This vulnerability is patched in CodeQL Action version 3.28.3 or later, or CodeQL CLI version 2.20.3 or later.
For some affected workflow runs, the exposed environment variables in the debug artifacts included a valid `GITHUB_TOKEN` for the workflow run, which has access to the repository in which the workflow ran, and all the permissions specified in the workflow or job. The `GITHUB_TOKEN` is valid until the job completes or 24 hours has elapsed, whichever comes first.
Environment variables are exposed only from workflow runs that satisfy all of the following conditions:
- Code scanning workflow configured to scan the Java/Kotlin languages.
- Running in a repository containing Kotlin source code.
- Running with debug artifacts enabled.
- Using CodeQL Action versions <= 3.28.2, and CodeQL CLI versions >= 2.9.2 (May 2022) and <= 2.20.2.
- The workflow run fails before the CodeQL database is finalized within the `github/codeql-action/analyze` step.
- Running in any GitHub environment: GitHub.com, GitHub Enterprise Cloud, and GitHub Enterprise Server. Note: artifacts are only accessible to users within the same GitHub environment with access to the scanned repo.
The `GITHUB_TOKEN` exposed in this way would only have been valid for workflow runs that satisfy all of the following conditions, in addition to the conditions above:
- Using CodeQL Action versions >= 3.26.11 (October 2024) and <= 3.28.2, or >= 2.26.11 and < 3.
- Running in GitHub.com or GitHub Enterprise Cloud only (not valid on GitHub Enterprise Server).
In rare cases during advanced setup, logging of environment variables may also occur during database creation of Java, Swift, and C/C++. Please read the corresponding CodeQL CLI advisory GHSA-gqh3-9prg-j95m for more details.
In CodeQL CLI versions >= 2.9.2 and <= 2.20.2, the CodeQL Kotlin extractor logs all environment variables by default into an intermediate file during the process of creating a CodeQL database for Kotlin code. This is a part of the CodeQL CLI and is invoked by the CodeQL Action for analyzing Kotlin repositories.
On Actions, the environment variables logged include GITHUB_TOKEN, which grants permissions to the repository being scanned.
The intermediate file containing environment variables is deleted when finalizing the database, so it is not included in a successfully created database. It is, however, included in the debug artifact that is uploaded on a failed analysis run if the CodeQL Action was invoked in debug mode.
Therefore, under these specific circumstances (incomplete database creation using the CodeQL Action in debug mode) an attacker with access to the debug artifact would gain unauthorized access to repository secrets from the environment, including both the `GITHUB_TOKEN` and any user-configured secrets made available via environment variables.
The impact of the `GITHUB_TOKEN` leaked in this environment is limited:
- For workflows on GitHub.com and GitHub Enterprise Cloud using CodeQL Action versions >= 3.26.11 and <= 3.28.2, or >= 2.26.11 and < 3, which in turn use the `actions/artifacts v4` library, the debug artifact is uploaded before the workflow job completes. During this time the `GITHUB_TOKEN` is still valid, providing an opportunity for attackers to gain access to the repository.
- For all other workflows, the debug artifact is uploaded after the workflow job completes, at which point the leaked `GITHUB_TOKEN` has been revoked and cannot be used to access the repository. |
| A flaw was found in Keycloak. An IDOR (Broken Access Control) vulnerability exists in the admin API endpoints for authorization resource management, specifically in ResourceSetService and PermissionTicketService. The system checks authorization against the resourceServer (client) ID provided in the API request, but the backend database lookup and modification operations (findById, delete) only use the resourceId. This mismatch allows an authenticated attacker with fine-grained admin permissions for one client (e.g., Client A) to delete or update resources belonging to another client (Client B) within the same realm by supplying a valid resource ID. |
| Incomplete validation of dunder attributes allows an attacker to escape from the Local Python execution environment sandbox, enforced by smolagents. The attack requires a Prompt Injection in order to trick the agent to create malicious code. |
| A security flaw has been discovered in elunez eladmin 1.1. Impacted is the function deleteFile of the component LocalStorageController. The manipulation results in improper authorization. The attack may be performed from remote. The exploit has been released to the public and may be exploited. |
| ImpactThe attacker can validate if a user exists by checking the time login returns. This timing difference can be used to enumerate valid usernames, after which an attacker could attempt brute force attacks.
PatchesThis vulnerability has been patched, implementing a timing-safe form login authenticator that ensures consistent response times regardless of whether a user exists or not.
Technical DetailsThe vulnerability was caused by different response times when:
* A valid username was provided (password hashing occurred)
* An invalid username was provided (no password hashing occurred)
The fix introduces a TimingSafeFormLoginAuthenticator that performs a dummy password hash verification even for non-existent users, ensuring consistent timing.
WorkaroundsNo workarounds are available. Users should upgrade to the patched version.
References * https://owasp.org/www-project-web-security-testing-guide/latest/4-Web_Application_Security_Testing/03-Identity_Management_Testing/04-Testing_for_Account_Enumeration_and_Guessable_User_Account |
| SummaryA Cross-Site Scripting (XSS) vulnerability allows an attacker to execute arbitrary JavaScript in the context of another user’s session. This occurs because user-supplied input is reflected back in the server’s response without proper sanitization or escaping, potentially enabling malicious actions such as session hijacking, credential theft, or unauthorized actions in the application.
DetailsThe vulnerability resides in the “Tags” input field on the /s/ajax?action=lead:addLeadTags endpoint. Although the server applies sanitization before storing the data or returning it later, the payload is executed immediately in the victim’s browser upon reflection, allowing an attacker to run arbitrary JavaScript in the user’s session.
ImpactA Reflected XSS attack can have a significant impact, allowing attackers to steal sensitive user data like cookies, redirect users to malicious websites, manipulate the web page content, and essentially take control of a user's session within an application by executing malicious JavaScript code within the victim's browser, even if the server-side code is secure; essentially enabling them to perform actions as if they were the logged-in user.
References * Web Security Academy: Cross-site scripting https://portswigger.net/web-security/cross-site-scripting
* Web Security Academy: Reflected cross-site scripting https://portswigger.net/web-security/cross-site-scripting/reflected |
| SummaryA user with administrator rights can change the configuration of the mautic application and extract secrets that are not normally available.
ImpactAn administrator who usually does not have access to certain parameters, such as database credentials, can disclose them. |
| SummaryUsers with webhook permissions can conduct SSRF via webhooks. If they have permission to view the webhook logs, the (partial) request response is also disclosed
DetailsWhen sending webhooks, the destination is not validated, causing SSRF.
ImpactBypass of firewalls to interact with internal services.
See https://owasp.org/Top10/A10_2021-Server-Side_Request_Forgery_%28SSRF%29/ for more potential impact.
Resources https://cheatsheetseries.owasp.org/cheatsheets/Server_Side_Request_Forgery_Prevention_Cheat_Sheet.html for more information on SSRF and its fix. |
| PaperCut Print Deploy is an optional component that integrates with PaperCut NG/MF which simplifies printer deployment and management. When the component is deployed to an environment, the customer has an option to configure the system to use a self-signed certificate. If the customer does not fully configure the system to leverage the trust database on the clients, it opens up the communication between clients and the server to man-in-the-middle attacks.
It was discovered that certain parts of the documentation related to the configuration of SSL in Print Deploy were lacking, which could potentially contribute to a misconfiguration of the Print Deploy client installation. PaperCut strongly recommends to use valid certificates to secure installations and to follow the updated documentation to ensure the correct SSL configuration. Those who use private CAs and/or self-signed certificates should make sure to copy their Certification Authority certificate, or their self signed certificate if using only one, to the trust store of their operating system and to the Java key store |
| The FlexTable WordPress plugin before 3.19.2 does not sanitise and escape the imported links from Google Sheet cells, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup). |
| Fuji Electric FRENIC-Loader 4 is vulnerable to a deserialization of untrusted data when importing a file through a specified window, which may allow an attacker to execute arbitrary code. |
| On affected platforms running Arista EOS with OSPFv3 configured, a specially crafted packet can cause the OSFPv3 process to have high CPU utilization which may result in the OSFPv3 process being restarted. This may cause disruption in the OSFPv3 routes on the switch.
This issue was discovered internally by Arista and is not aware of any malicious uses of this issue in customer networks. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
If irq_domain_translate_twocell() sets "hwirq" to >= MCHP_EIC_NIRQ (2) then
it results in an out of bounds access.
The code checks for invalid values, but doesn't set the error code. Return
-EINVAL in that case, instead of returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add()
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Correctly handle return of sg_nents_for_len
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: initialize work queue before error checks
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show
In iommu_mmio_write(), it validates the user-provided offset with the
check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`.
This assumes a 4-byte access. However, the corresponding
show handler, iommu_mmio_show(), uses readq() to perform an 8-byte
(64-bit) read.
If a user provides an offset equal to `mmio_phys_end - 4`, the check
passes, and will lead to a 4-byte out-of-bounds read.
Fix this by adjusting the boundary check to use sizeof(u64), which
corresponds to the size of the readq() operation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring()
In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA
allocations in a loop. When an allocation fails, the previously
successful allocations are not freed on exit.
Fix that by jumping to err_free_rings label on error, which calls
rtl8180_free_rx_ring() to free the allocations. Remove the free of
rx_ring in rtl8180_init_rx_ring() error path, and set the freed
priv->rx_buf entry to null, to avoid double free. |
| In the Linux kernel, the following vulnerability has been resolved:
backlight: led-bl: Add devlink to supplier LEDs
LED Backlight is a consumer of one or multiple LED class devices, but
devlink is currently unable to create correct supplier-producer links when
the supplier is a class device. It creates instead a link where the
supplier is the parent of the expected device.
One consequence is that removal order is not correctly enforced.
Issues happen for example with the following sections in a device tree
overlay:
// An LED driver chip
pca9632@62 {
compatible = "nxp,pca9632";
reg = <0x62>;
// ...
addon_led_pwm: led-pwm@3 {
reg = <3>;
label = "addon:led:pwm";
};
};
backlight-addon {
compatible = "led-backlight";
leds = <&addon_led_pwm>;
brightness-levels = <255>;
default-brightness-level = <255>;
};
In this example, the devlink should be created between the backlight-addon
(consumer) and the pca9632@62 (supplier). Instead it is created between the
backlight-addon (consumer) and the parent of the pca9632@62, which is
typically the I2C bus adapter.
On removal of the above overlay, the LED driver can be removed before the
backlight device, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
Call trace:
led_put+0xe0/0x140
devm_led_release+0x6c/0x98
Another way to reproduce the bug without any device tree overlays is
unbinding the LED class device (pca9632@62) before unbinding the consumer
(backlight-addon):
echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind
echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind
Fix by adding a devlink between the consuming led-backlight device and the
supplying LED device, as other drivers and subsystems do as well. |
