| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Use separate src/dst nodes when preloading css_sets for migration
Each cset (css_set) is pinned by its tasks. When we're moving tasks around
across csets for a migration, we need to hold the source and destination
csets to ensure that they don't go away while we're moving tasks about. This
is done by linking cset->mg_preload_node on either the
mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the
same cset->mg_preload_node for both the src and dst lists was deemed okay as
a cset can't be both the source and destination at the same time.
Unfortunately, this overloading becomes problematic when multiple tasks are
involved in a migration and some of them are identity noop migrations while
others are actually moving across cgroups. For example, this can happen with
the following sequence on cgroup1:
#1> mkdir -p /sys/fs/cgroup/misc/a/b
#2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs
#3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS &
#4> PID=$!
#5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks
#6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs
the process including the group leader back into a. In this final migration,
non-leader threads would be doing identity migration while the group leader
is doing an actual one.
After #3, let's say the whole process was in cset A, and that after #4, the
leader moves to cset B. Then, during #6, the following happens:
1. cgroup_migrate_add_src() is called on B for the leader.
2. cgroup_migrate_add_src() is called on A for the other threads.
3. cgroup_migrate_prepare_dst() is called. It scans the src list.
4. It notices that B wants to migrate to A, so it tries to A to the dst
list but realizes that its ->mg_preload_node is already busy.
5. and then it notices A wants to migrate to A as it's an identity
migration, it culls it by list_del_init()'ing its ->mg_preload_node and
putting references accordingly.
6. The rest of migration takes place with B on the src list but nothing on
the dst list.
This means that A isn't held while migration is in progress. If all tasks
leave A before the migration finishes and the incoming task pins it, the
cset will be destroyed leading to use-after-free.
This is caused by overloading cset->mg_preload_node for both src and dst
preload lists. We wanted to exclude the cset from the src list but ended up
inadvertently excluding it from the dst list too.
This patch fixes the issue by separating out cset->mg_preload_node into
->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst
preloadings don't interfere with each other. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: fix memory leak in vlan_newlink()
Blamed commit added back a bug I fixed in commit 9bbd917e0bec
("vlan: fix memory leak in vlan_dev_set_egress_priority")
If a memory allocation fails in vlan_changelink() after other allocations
succeeded, we need to call vlan_dev_free_egress_priority()
to free all allocated memory because after a failed ->newlink()
we do not call any methods like ndo_uninit() or dev->priv_destructor().
In following example, if the allocation for last element 2000:2001 fails,
we need to free eight prior allocations:
ip link add link dummy0 dummy0.100 type vlan id 100 \
egress-qos-map 1:2 2:3 3:4 4:5 5:6 6:7 7:8 8:9 2000:2001
syzbot report was:
BUG: memory leak
unreferenced object 0xffff888117bd1060 (size 32):
comm "syz-executor408", pid 3759, jiffies 4294956555 (age 34.090s)
hex dump (first 32 bytes):
09 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff83fc60ad>] kmalloc include/linux/slab.h:600 [inline]
[<ffffffff83fc60ad>] vlan_dev_set_egress_priority+0xed/0x170 net/8021q/vlan_dev.c:193
[<ffffffff83fc6628>] vlan_changelink+0x178/0x1d0 net/8021q/vlan_netlink.c:128
[<ffffffff83fc67c8>] vlan_newlink+0x148/0x260 net/8021q/vlan_netlink.c:185
[<ffffffff838b1278>] rtnl_newlink_create net/core/rtnetlink.c:3363 [inline]
[<ffffffff838b1278>] __rtnl_newlink+0xa58/0xdc0 net/core/rtnetlink.c:3580
[<ffffffff838b1629>] rtnl_newlink+0x49/0x70 net/core/rtnetlink.c:3593
[<ffffffff838ac66c>] rtnetlink_rcv_msg+0x21c/0x5c0 net/core/rtnetlink.c:6089
[<ffffffff839f9c37>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2501
[<ffffffff839f8da7>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
[<ffffffff839f8da7>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345
[<ffffffff839f9266>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921
[<ffffffff8384dbf6>] sock_sendmsg_nosec net/socket.c:714 [inline]
[<ffffffff8384dbf6>] sock_sendmsg+0x56/0x80 net/socket.c:734
[<ffffffff8384e15c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2488
[<ffffffff838523cb>] ___sys_sendmsg+0x8b/0xd0 net/socket.c:2542
[<ffffffff838525b8>] __sys_sendmsg net/socket.c:2571 [inline]
[<ffffffff838525b8>] __do_sys_sendmsg net/socket.c:2580 [inline]
[<ffffffff838525b8>] __se_sys_sendmsg net/socket.c:2578 [inline]
[<ffffffff838525b8>] __x64_sys_sendmsg+0x78/0xf0 net/socket.c:2578
[<ffffffff845ad8d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff845ad8d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff8460006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix use after free when disabling sriov
Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.
Set the pointer to NULL at release time to not trying to read it later.
Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k
allocated by task 6771 on cpu 10 at 3137.860196s:
pci_alloc_dev+0x21/0x60
pci_iov_add_virtfn+0x2a2/0x320
sriov_enable+0x212/0x3e0
efx_ef10_sriov_configure+0x67/0x80 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xba/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
freed by task 6771 on cpu 12 at 3170.991309s:
device_release+0x34/0x90
kobject_cleanup+0x3a/0x130
pci_iov_remove_virtfn+0xd9/0x120
sriov_disable+0x30/0xe0
efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume
BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3
Call trace:
dpu_vbif_init_memtypes+0x40/0xb8
dpu_runtime_resume+0xcc/0x1c0
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x134/0x258
__rpm_callback+0x98/0x138
rpm_callback+0x30/0x88
rpm_resume+0x36c/0x49c
__pm_runtime_resume+0x80/0xb0
dpu_core_irq_uninstall+0x30/0xb0
dpu_irq_uninstall+0x18/0x24
msm_drm_uninit+0xd8/0x16c
Patchwork: https://patchwork.freedesktop.org/patch/483255/
[DB: fixed Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix buffer copy overflow of ztailpacking feature
I got some KASAN report as below:
[ 46.959738] ==================================================================
[ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188
...
[ 46.960430] Call Trace:
[ 46.960430] <TASK>
[ 46.960430] dump_stack_lvl+0x41/0x5e
[ 46.960430] print_report.cold+0xb2/0x6b7
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_report+0x8a/0x140
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_check_range+0x14d/0x1d0
[ 46.960430] memcpy+0x20/0x60
[ 46.960430] z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080
The root cause is that the tail pcluster won't be a complete filesystem
block anymore. So if ztailpacking is used, the second part of an
uncompressed tail pcluster may not be ``rq->pageofs_out``. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-sva: Fix mm use-after-free
We currently call arm64_mm_context_put() without holding a reference to
the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to
ensure the mm only gets freed after we unpinned the ASID. |
| In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
Commit b3c9a924aab6 ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather
than .remove") fixed a use-after-free error due the vesafb driver freeing
the fb_info in the .remove handler instead of doing it in .fb_destroy.
This can happen if the .fb_destroy callback is executed after the .remove
callback, since the former tries to access a pointer freed by the latter.
But that change didn't take into account that another possible scenario is
that .fb_destroy is called before the .remove callback. For example, if no
process has the fbdev chardev opened by the time the driver is removed.
If that's the case, fb_info will be freed when unregister_framebuffer() is
called, making the fb_info pointer accessed in vesafb_remove() after that
to no longer be valid.
To prevent that, move the expression containing the info->par to happen
before the unregister_framebuffer() function call. |
| In the Linux kernel, the following vulnerability has been resolved:
bfq: Update cgroup information before merging bio
When the process is migrated to a different cgroup (or in case of
writeback just starts submitting bios associated with a different
cgroup) bfq_merge_bio() can operate with stale cgroup information in
bic. Thus the bio can be merged to a request from a different cgroup or
it can result in merging of bfqqs for different cgroups or bfqqs of
already dead cgroups and causing possible use-after-free issues. Fix the
problem by updating cgroup information in bfq_merge_bio(). |
| In the Linux kernel, the following vulnerability has been resolved:
bfq: Make sure bfqg for which we are queueing requests is online
Bios queued into BFQ IO scheduler can be associated with a cgroup that
was already offlined. This may then cause insertion of this bfq_group
into a service tree. But this bfq_group will get freed as soon as last
bio associated with it is completed leading to use after free issues for
service tree users. Fix the problem by making sure we always operate on
online bfq_group. If the bfq_group associated with the bio is not
online, we pick the first online parent. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: ubi_create_volume: Fix use-after-free when volume creation failed
There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s
error handling path:
ubi_eba_replace_table(vol, eba_tbl)
vol->eba_tbl = tbl
out_mapping:
ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl'
out_unlock:
put_device(&vol->dev)
vol_release
kfree(tbl->entries) // UAF
Fix it by removing redundant 'eba_tbl' releasing.
Fetch a reproducer in [Link]. |
| In the Linux kernel, the following vulnerability has been resolved:
driver: base: fix UAF when driver_attach failed
When driver_attach(drv); failed, the driver_private will be freed.
But it has been added to the bus, which caused a UAF.
To fix it, we need to delete it from the bus when failed. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx
blk_mq_run_hw_queues() could be run when there isn't queued request and
after queue is cleaned up, at that time tagset is freed, because tagset
lifetime is covered by driver, and often freed after blk_cleanup_queue()
returns.
So don't touch ->tagset for figuring out current default hctx by the mapping
built in request queue, so use-after-free on tagset can be avoided. Meantime
this way should be fast than retrieving mapping from tagset. |
| In the Linux kernel, the following vulnerability has been resolved:
can: m_can: m_can_tx_handler(): fix use after free of skb
can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix use-after-free in dm_cleanup_zoned_dev()
dm_cleanup_zoned_dev() uses queue, so it must be called
before blk_cleanup_disk() starts its killing:
blk_cleanup_disk->blk_cleanup_queue()->kobject_put()->blk_release_queue()->
->...RCU...->blk_free_queue_rcu()->kmem_cache_free()
Otherwise, RCU callback may be executed first and
dm_cleanup_zoned_dev() will touch free'd memory:
BUG: KASAN: use-after-free in dm_cleanup_zoned_dev+0x33/0xd0
Read of size 8 at addr ffff88805ac6e430 by task dmsetup/681
CPU: 4 PID: 681 Comm: dmsetup Not tainted 5.17.0-rc2+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x150
? dm_cleanup_zoned_dev+0x33/0xd0
kasan_report.cold+0x7f/0x11b
? dm_cleanup_zoned_dev+0x33/0xd0
dm_cleanup_zoned_dev+0x33/0xd0
__dm_destroy+0x26a/0x400
? dm_blk_ioctl+0x230/0x230
? up_write+0xd8/0x270
dev_remove+0x156/0x1d0
ctl_ioctl+0x269/0x530
? table_clear+0x140/0x140
? lock_release+0xb2/0x750
? remove_all+0x40/0x40
? rcu_read_lock_sched_held+0x12/0x70
? lock_downgrade+0x3c0/0x3c0
? rcu_read_lock_sched_held+0x12/0x70
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fb6dfa95c27 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccree - Fix use after free in cc_cipher_exit()
kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But
ctx_p->user.key is still used in the next line, which will lead to a
use after free.
We can call kfree_sensitive() after dev_dbg() to avoid the uaf. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF due to race between btf_try_get_module and load_module
While working on code to populate kfunc BTF ID sets for module BTF from
its initcall, I noticed that by the time the initcall is invoked, the
module BTF can already be seen by userspace (and the BPF verifier). The
existing btf_try_get_module calls try_module_get which only fails if
mod->state == MODULE_STATE_GOING, i.e. it can increment module reference
when module initcall is happening in parallel.
Currently, BTF parsing happens from MODULE_STATE_COMING notifier
callback. At this point, the module initcalls have not been invoked.
The notifier callback parses and prepares the module BTF, allocates an
ID, which publishes it to userspace, and then adds it to the btf_modules
list allowing the kernel to invoke btf_try_get_module for the BTF.
However, at this point, the module has not been fully initialized (i.e.
its initcalls have not finished). The code in module.c can still fail
and free the module, without caring for other users. However, nothing
stops btf_try_get_module from succeeding between the state transition
from MODULE_STATE_COMING to MODULE_STATE_LIVE.
This leads to a use-after-free issue when BPF program loads
successfully in the state transition, load_module's do_init_module call
fails and frees the module, and BPF program fd on close calls module_put
for the freed module. Future patch has test case to verify we don't
regress in this area in future.
There are multiple points after prepare_coming_module (in load_module)
where failure can occur and module loading can return error. We
illustrate and test for the race using the last point where it can
practically occur (in module __init function).
An illustration of the race:
CPU 0 CPU 1
load_module
notifier_call(MODULE_STATE_COMING)
btf_parse_module
btf_alloc_id // Published to userspace
list_add(&btf_mod->list, btf_modules)
mod->init(...)
... ^
bpf_check |
check_pseudo_btf_id |
btf_try_get_module |
returns true | ...
... | module __init in progress
return prog_fd | ...
... V
if (ret < 0)
free_module(mod)
...
close(prog_fd)
...
bpf_prog_free_deferred
module_put(used_btf.mod) // use-after-free
We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier
callback when MODULE_STATE_LIVE state is reached for the module, so that
we return NULL from btf_try_get_module for modules that are not fully
formed. Since try_module_get already checks that module is not in
MODULE_STATE_GOING state, and that is the only transition a live module
can make before being removed from btf_modules list, this is enough to
close the race and prevent the bug.
A later selftest patch crafts the race condition artifically to verify
that it has been fixed, and that verifier fails to load program (with
ENXIO).
Lastly, a couple of comments:
1. Even if this race didn't exist, it seems more appropriate to only
access resources (ksyms and kfuncs) of a fully formed module which
has been initialized completely.
2. This patch was born out of need for synchronization against module
initcall for the next patch, so it is needed for correctness even
without the aforementioned race condition. The BTF resources
initialized by module initcall are set up once and then only looked
up, so just waiting until the initcall has finished ensures correct
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Hold port reference until decoder release
KASAN + DEBUG_KOBJECT_RELEASE reports a potential use-after-free in
cxl_decoder_release() where it goes to reference its parent, a cxl_port,
to free its id back to port->decoder_ida.
BUG: KASAN: use-after-free in to_cxl_port+0x18/0x90 [cxl_core]
Read of size 8 at addr ffff888119270908 by task kworker/35:2/379
CPU: 35 PID: 379 Comm: kworker/35:2 Tainted: G OE 5.17.0-rc2+ #198
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: events kobject_delayed_cleanup
Call Trace:
<TASK>
dump_stack_lvl+0x59/0x73
print_address_description.constprop.0+0x1f/0x150
? to_cxl_port+0x18/0x90 [cxl_core]
kasan_report.cold+0x83/0xdf
? to_cxl_port+0x18/0x90 [cxl_core]
to_cxl_port+0x18/0x90 [cxl_core]
cxl_decoder_release+0x2a/0x60 [cxl_core]
device_release+0x5f/0x100
kobject_cleanup+0x80/0x1c0
The device core only guarantees parent lifetime until all children are
unregistered. If a child needs a parent to complete its ->release()
callback that child needs to hold a reference to extend the lifetime of
the parent. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: add vlan list lock to protect vlan list
When adding port base VLAN, vf VLAN need to remove from HW and modify
the vlan state in vf VLAN list as false. If the periodicity task is
freeing the same node, it may cause "use after free" error.
This patch adds a vlan list lock to protect the vlan list. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: don't move oom_bfqq
Our test report a UAF:
[ 2073.019181] ==================================================================
[ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584
[ 2073.019192]
[ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5
[ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2073.019200] Call trace:
[ 2073.019203] dump_backtrace+0x0/0x310
[ 2073.019206] show_stack+0x28/0x38
[ 2073.019210] dump_stack+0xec/0x15c
[ 2073.019216] print_address_description+0x68/0x2d0
[ 2073.019220] kasan_report+0x238/0x2f0
[ 2073.019224] __asan_store8+0x88/0xb0
[ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019233] bfq_put_async_queues+0xbc/0x208
[ 2073.019236] bfq_pd_offline+0x178/0x238
[ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019244] bfq_exit_queue+0x128/0x178
[ 2073.019249] blk_mq_exit_sched+0x12c/0x160
[ 2073.019252] elevator_exit+0xc8/0xd0
[ 2073.019256] blk_exit_queue+0x50/0x88
[ 2073.019259] blk_cleanup_queue+0x228/0x3d8
[ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019274] null_exit+0x90/0x114 [null_blk]
[ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019282] el0_svc_common+0xc8/0x320
[ 2073.019287] el0_svc_handler+0xf8/0x160
[ 2073.019290] el0_svc+0x10/0x218
[ 2073.019291]
[ 2073.019294] Allocated by task 14163:
[ 2073.019301] kasan_kmalloc+0xe0/0x190
[ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418
[ 2073.019308] bfq_pd_alloc+0x54/0x118
[ 2073.019313] blkcg_activate_policy+0x250/0x460
[ 2073.019317] bfq_create_group_hierarchy+0x38/0x110
[ 2073.019321] bfq_init_queue+0x6d0/0x948
[ 2073.019325] blk_mq_init_sched+0x1d8/0x390
[ 2073.019330] elevator_switch_mq+0x88/0x170
[ 2073.019334] elevator_switch+0x140/0x270
[ 2073.019338] elv_iosched_store+0x1a4/0x2a0
[ 2073.019342] queue_attr_store+0x90/0xe0
[ 2073.019348] sysfs_kf_write+0xa8/0xe8
[ 2073.019351] kernfs_fop_write+0x1f8/0x378
[ 2073.019359] __vfs_write+0xe0/0x360
[ 2073.019363] vfs_write+0xf0/0x270
[ 2073.019367] ksys_write+0xdc/0x1b8
[ 2073.019371] __arm64_sys_write+0x50/0x60
[ 2073.019375] el0_svc_common+0xc8/0x320
[ 2073.019380] el0_svc_handler+0xf8/0x160
[ 2073.019383] el0_svc+0x10/0x218
[ 2073.019385]
[ 2073.019387] Freed by task 72584:
[ 2073.019391] __kasan_slab_free+0x120/0x228
[ 2073.019394] kasan_slab_free+0x10/0x18
[ 2073.019397] kfree+0x94/0x368
[ 2073.019400] bfqg_put+0x64/0xb0
[ 2073.019404] bfqg_and_blkg_put+0x90/0xb0
[ 2073.019408] bfq_put_queue+0x220/0x228
[ 2073.019413] __bfq_put_async_bfqq+0x98/0x168
[ 2073.019416] bfq_put_async_queues+0xbc/0x208
[ 2073.019420] bfq_pd_offline+0x178/0x238
[ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019429] bfq_exit_queue+0x128/0x178
[ 2073.019433] blk_mq_exit_sched+0x12c/0x160
[ 2073.019437] elevator_exit+0xc8/0xd0
[ 2073.019440] blk_exit_queue+0x50/0x88
[ 2073.019443] blk_cleanup_queue+0x228/0x3d8
[ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019459] null_exit+0x90/0x114 [null_blk]
[ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019467] el0_svc_common+0xc8/0x320
[ 2073.019471] el0_svc_handler+0xf8/0x160
[ 2073.019474] el0_svc+0x10/0x218
[ 2073.019475]
[ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00
which belongs to the cache kmalloc-1024 of size 1024
[ 2073.019484] The buggy address is located 552 bytes inside of
1024-byte region [ffff8000ccf63f00, ffff8000ccf64300)
[ 2073.019486] The buggy address belongs to the page:
[ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0
[ 2073.020123] flags: 0x7ffff0000008100(slab|head)
[ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00
[ 2073.020409] ra
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bfq: fix use-after-free in bfq_dispatch_request
KASAN reports a use-after-free report when doing normal scsi-mq test
[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541] dump_stack+0x9b/0xce
[69832.251232] ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243] print_address_description.constprop.6+0x3e/0x60
[69832.253381] ? __cpuidle_text_end+0x5/0x5
[69832.254211] ? vprintk_func+0x6b/0x120
[69832.254994] ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952] ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914] kasan_report.cold.9+0x22/0x3a
[69832.257753] ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755] check_memory_region+0x1c1/0x1e0
[69832.260248] bfq_dispatch_request+0x1045/0x44b0
[69832.261181] ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147] ? __switch_to+0x5f4/0xee0
[69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946] __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840] blk_mq_run_work_fn+0x51/0x60
[69832.278170] process_one_work+0x6d4/0xfe0
[69832.278984] worker_thread+0x91/0xc80
[69832.279726] ? __kthread_parkme+0xb0/0x110
[69832.280554] ? process_one_work+0xfe0/0xfe0
[69832.281414] kthread+0x32d/0x3f0
[69832.282082] ? kthread_park+0x170/0x170
[69832.282849] ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599] kasan_save_stack+0x19/0x40
[69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350] kmem_cache_alloc_node+0x13f/0x460
[69832.287237] bfq_get_queue+0x3d4/0x1140
[69832.287993] bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015] bfq_init_rq+0x337/0x2d50
[69832.289749] bfq_insert_requests+0x304/0x4e10
[69832.290634] blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629] blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538] blk_flush_plug_list+0x2c5/0x480
[69832.293392] io_schedule_prepare+0xb2/0xd0
[69832.294209] io_schedule_timeout+0x13/0x80
[69832.295014] wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137] submit_bio_wait+0x103/0x1a0
[69832.296932] blkdev_issue_discard+0xe6/0x160
[69832.297794] blk_ioctl_discard+0x219/0x290
[69832.298614] blkdev_common_ioctl+0x50a/0x1750
[69832.304715] blkdev_ioctl+0x470/0x600
[69832.305474] block_ioctl+0xde/0x120
[69832.306232] vfs_ioctl+0x6c/0xc0
[69832.306877] __se_sys_ioctl+0x90/0xa0
[69832.307629] do_syscall_64+0x2d/0x40
[69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328] kasan_save_stack+0x19/0x40
[69832.311121] kasan_set_track+0x1c/0x30
[69832.311868] kasan_set_free_info+0x1b/0x30
[69832.312699] __kasan_slab_free+0x111/0x160
[69832.313524] kmem_cache_free+0x94/0x460
[69832.314367] bfq_put_queue+0x582/0x940
[69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275] bfq_bfqq_expire+0xb27/0x2440
[69832.318084] bfq_dispatch_request+0x697/0x44b0
[69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225] __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114] blk_mq_run_work_fn+0x51/0x6
---truncated--- |
