| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Correct the migration DMA map direction
The SVM DMA device map direction should be set the same as
the DMA unmap setting, otherwise the DMA core will report
the following warning.
Before finialize this solution, there're some discussion on
the DMA mapping type(stream-based or coherent) in this KFD
migration case, followed by https://lore.kernel.org/all/04d4ab32
-45a1-4b88-86ee-fb0f35a0ca40@amd.com/T/.
As there's no dma_sync_single_for_*() in the DMA buffer accessed
that because this migration operation should be sync properly and
automatically. Give that there's might not be a performance problem
in various cache sync policy of DMA sync. Therefore, in order to
simplify the DMA direction setting alignment, let's set the DMA map
direction as BIDIRECTIONAL.
[ 150.834218] WARNING: CPU: 8 PID: 1812 at kernel/dma/debug.c:1028 check_unmap+0x1cc/0x930
[ 150.834225] Modules linked in: amdgpu(OE) amdxcp drm_exec(OE) gpu_sched drm_buddy(OE) drm_ttm_helper(OE) ttm(OE) drm_suballoc_helper(OE) drm_display_helper(OE) drm_kms_helper(OE) i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc sch_fq_codel intel_rapl_msr amd_atl intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd snd_pci_acp6x snd_hda_codec snd_acp_config snd_hda_core snd_hwdep snd_soc_acpi kvm_amd sunrpc snd_pcm kvm binfmt_misc snd_seq_midi crct10dif_pclmul snd_seq_midi_event ghash_clmulni_intel sha512_ssse3 snd_rawmidi nls_iso8859_1 sha256_ssse3 sha1_ssse3 snd_seq aesni_intel snd_seq_device crypto_simd snd_timer cryptd input_leds
[ 150.834310] wmi_bmof serio_raw k10temp rapl snd sp5100_tco ipmi_devintf soundcore ccp ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport efi_pstore drm(OE) ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii
[ 150.834354] CPU: 8 PID: 1812 Comm: rocrtst64 Tainted: G OE 6.10.0-custom #492
[ 150.834358] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021
[ 150.834360] RIP: 0010:check_unmap+0x1cc/0x930
[ 150.834363] Code: c0 4c 89 4d c8 e8 34 bf 86 00 4c 8b 4d c8 4c 8b 45 c0 48 8b 4d b8 48 89 c6 41 57 4c 89 ea 48 c7 c7 80 49 b4 84 e8 b4 81 f3 ff <0f> 0b 48 c7 c7 04 83 ac 84 e8 76 ba fc ff 41 8b 76 4c 49 8d 7e 50
[ 150.834365] RSP: 0018:ffffaac5023739e0 EFLAGS: 00010086
[ 150.834368] RAX: 0000000000000000 RBX: ffffffff8566a2e0 RCX: 0000000000000027
[ 150.834370] RDX: ffff8f6a8f621688 RSI: 0000000000000001 RDI: ffff8f6a8f621680
[ 150.834372] RBP: ffffaac502373a30 R08: 00000000000000c9 R09: ffffaac502373850
[ 150.834373] R10: ffffaac502373848 R11: ffffffff84f46328 R12: ffffaac502373a40
[ 150.834375] R13: ffff8f6741045330 R14: ffff8f6741a77700 R15: ffffffff84ac831b
[ 150.834377] FS: 00007faf0fc94c00(0000) GS:ffff8f6a8f600000(0000) knlGS:0000000000000000
[ 150.834379] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 150.834381] CR2: 00007faf0b600020 CR3: 000000010a52e000 CR4: 0000000000350ef0
[ 150.834383] Call Trace:
[ 150.834385] <TASK>
[ 150.834387] ? show_regs+0x6d/0x80
[ 150.834393] ? __warn+0x8c/0x140
[ 150.834397] ? check_unmap+0x1cc/0x930
[ 150.834400] ? report_bug+0x193/0x1a0
[ 150.834406] ? handle_bug+0x46/0x80
[ 150.834410] ? exc_invalid_op+0x1d/0x80
[ 150.834413] ? asm_exc_invalid_op+0x1f/0x30
[ 150.834420] ? check_unmap+0x1cc/0x930
[ 150.834425] debug_dma_unmap_page+0x86/0x90
[ 150.834431] ? srso_return_thunk+0x5/0x5f
[ 150.834435]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv
When mounting ocfs2 and then remounting it as read-only, a
slab-use-after-free occurs after the user uses a syscall to
quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the
dangling pointer.
During the remounting process, the pointer dqi_priv is freed but is never
set as null leaving it to be accessed. Additionally, the read-only option
for remounting sets the DQUOT_SUSPENDED flag instead of setting the
DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the
next quota, the function ocfs2_get_next_id is called and only checks the
quota usage flags and not the quota suspended flags.
To fix this, I set dqi_priv to null when it is freed after remounting with
read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id.
[akpm@linux-foundation.org: coding-style cleanups] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Prevent integer overflow issue
In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32
values that come from the user so the multiplication can lead to integer
wrapping. Then we pass the result to uverbs_request_next_ptr() which also
could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)"
multiplication can also overflow on 32bit systems although it's fine on
64bit systems.
This patch does two things. First, I've re-arranged the condition in
uverbs_request_next_ptr() so that the use controlled variable "len" is on
one side of the comparison by itself without any math. Then I've modified
all the callers to use size_mul() for the multiplications. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking
If a device uses MCP23xxx IO expander to receive IRQs, the following
bug can happen:
BUG: sleeping function called from invalid context
at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ...
preempt_count: 1, expected: 0
...
Call Trace:
...
__might_resched+0x104/0x10e
__might_sleep+0x3e/0x62
mutex_lock+0x20/0x4c
regmap_lock_mutex+0x10/0x18
regmap_update_bits_base+0x2c/0x66
mcp23s08_irq_set_type+0x1ae/0x1d6
__irq_set_trigger+0x56/0x172
__setup_irq+0x1e6/0x646
request_threaded_irq+0xb6/0x160
...
We observed the problem while experimenting with a touchscreen driver which
used MCP23017 IO expander (I2C).
The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from
concurrent accesses, which is the default for regmaps without .fast_io,
.disable_locking, etc.
mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter
locks the mutex.
However, __setup_irq() locks desc->lock spinlock before calling these
functions. As a result, the system tries to lock the mutex whole holding
the spinlock.
It seems, the internal regmap locks are not needed in this driver at all.
mcp->lock seems to protect the regmap from concurrent accesses already,
except, probably, in mcp_pinconf_get/set.
mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under
chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes
mcp->lock and enables regmap caching, so that the potentially slow I2C
accesses are deferred until chip_bus_unlock().
The accesses to the regmap from mcp23s08_probe_one() do not need additional
locking.
In all remaining places where the regmap is accessed, except
mcp_pinconf_get/set(), the driver already takes mcp->lock.
This patch adds locking in mcp_pinconf_get/set() and disables internal
locking in the regmap config. Among other things, it fixes the sleeping
in atomic context described above. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix resetting msg rx state after topology removal
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl'
variable, and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently tagged_addr_ctrl_set() will consume an
arbitrary value, potentially leaking up to 64 bits of memory from the
kernel stack. The read is limited to a specific slot on the stack, and
the issue does not provide a write mechanism.
As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and
rejects other values, a partial SETREGSET attempt will randomly succeed
or fail depending on the value of the uninitialized value, and the
exposure is significantly limited.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
value of the tagged address ctrl will be retained.
The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the
user_aarch64_view used by a native AArch64 task to manipulate another
native AArch64 task. As get_tagged_addr_ctrl() only returns an error
value when called for a compat task, tagged_addr_ctrl_get() and
tagged_addr_ctrl_set() should never observe an error value from
get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that
such an error would be unexpected, and error handlnig is not missing in
either case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix memory leak in tcp_conn_request()
If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will
return without free the dst memory, which allocated in af_ops->route_req.
Here is the kmemleak stack:
unreferenced object 0xffff8881198631c0 (size 240):
comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s)
hex dump (first 32 bytes):
00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................
81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U..............
backtrace:
[<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80
[<ffffffffba11b4c5>] dst_alloc+0x55/0x250
[<ffffffffba227bf6>] rt_dst_alloc+0x46/0x1d0
[<ffffffffba23050a>] __mkroute_output+0x29a/0xa50
[<ffffffffba23456b>] ip_route_output_key_hash+0x10b/0x240
[<ffffffffba2346bd>] ip_route_output_flow+0x1d/0x90
[<ffffffffba254855>] inet_csk_route_req+0x2c5/0x500
[<ffffffffba26b331>] tcp_conn_request+0x691/0x12c0
[<ffffffffba27bd08>] tcp_rcv_state_process+0x3c8/0x11b0
[<ffffffffba2965c6>] tcp_v4_do_rcv+0x156/0x3b0
[<ffffffffba299c98>] tcp_v4_rcv+0x1cf8/0x1d80
[<ffffffffba239656>] ip_protocol_deliver_rcu+0xf6/0x360
[<ffffffffba2399a6>] ip_local_deliver_finish+0xe6/0x1e0
[<ffffffffba239b8e>] ip_local_deliver+0xee/0x360
[<ffffffffba239ead>] ip_rcv+0xad/0x2f0
[<ffffffffba110943>] __netif_receive_skb_one_core+0x123/0x140
Call dst_release() to free the dst memory when
inet_csk_reqsk_queue_hash_add() return false in tcp_conn_request(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: imx8m: Probe the SoC driver as platform driver
With driver_async_probe=* on kernel command line, the following trace is
produced because on i.MX8M Plus hardware because the soc-imx8m.c driver
calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock
driver is not yet probed. This was not detected during regular testing
without driver_async_probe.
Convert the SoC code to platform driver and instantiate a platform device
in its current device_initcall() to probe the platform driver. Rework
.soc_revision callback to always return valid error code and return SoC
revision via parameter. This way, if anything in the .soc_revision callback
return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get
retried later.
"
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603
Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : imx8mm_soc_revision+0xdc/0x180
lr : imx8mm_soc_revision+0xd0/0x180
sp : ffff8000821fbcc0
x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120
x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311
x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb
x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff
x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8
x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801
x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c
x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3
x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb
Call trace:
imx8mm_soc_revision+0xdc/0x180
imx8_soc_init+0xb0/0x1e0
do_one_initcall+0x94/0x1a8
kernel_init_freeable+0x240/0x2a8
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
SoC: i.MX8MP revision 1.1
" |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to
restrict this maximum depth to a more reasonable value not to harm
performance. Remove unnecessary WARN_ON_ONCE which is reachable from
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
Syzbot reports a null-ptr-deref in btrfs_search_slot().
The reproducer is using rescue=ibadroots, and the extent tree root is
corrupted thus the extent tree is NULL.
When scrub tries to search the extent tree to gather the needed extent
info, btrfs_search_slot() doesn't check if the target root is NULL or
not, resulting the null-ptr-deref.
Add sanity check for btrfs root before using it in btrfs_search_slot(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
Syzbot reports [1] an uninitialized value issue found by KMSAN in
dib3000_read_reg().
Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case
that call fails, the buffer may end up with some undefined values.
Since no elaborate error handling is expected in dib3000_write_reg(),
simply zero out rb buffer to mitigate the problem.
[1] Syzkaller report
dvb-usb: bulk message failed: -22 (6/0)
=====================================================
BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31
dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline]
dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline]
dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310
dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110
...
Local variable rb created at:
dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54
dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
... |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: at_xdmac: avoid null_prt_deref in at_xdmac_prep_dma_memset
The at_xdmac_memset_create_desc may return NULL, which will lead to a
null pointer dereference. For example, the len input is error, or the
atchan->free_descs_list is empty and memory is exhausted. Therefore, add
check to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix double free in atmel_pmecc_create_user()
The "user" pointer was converted from being allocated with kzalloc() to
being allocated by devm_kzalloc(). Calling kfree(user) will lead to a
double free. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries/vas: Add close() callback in vas_vm_ops struct
The mapping VMA address is saved in VAS window struct when the
paste address is mapped. This VMA address is used during migration
to unmap the paste address if the window is active. The paste
address mapping will be removed when the window is closed or with
the munmap(). But the VMA address in the VAS window is not updated
with munmap() which is causing invalid access during migration.
The KASAN report shows:
[16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8
[16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928
[16386.255096] CPU: 29 UID: 0 PID: 696928 Comm: drmgr Kdump: loaded Tainted: G B 6.11.0-rc5-nxgzip #2
[16386.255128] Tainted: [B]=BAD_PAGE
[16386.255148] Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.00 (NH1110_016) hv:phyp pSeries
[16386.255181] Call Trace:
[16386.255202] [c00000016b297660] [c0000000018ad0ac] dump_stack_lvl+0x84/0xe8 (unreliable)
[16386.255246] [c00000016b297690] [c0000000006e8a90] print_report+0x19c/0x764
[16386.255285] [c00000016b297760] [c0000000006e9490] kasan_report+0x128/0x1f8
[16386.255309] [c00000016b297880] [c0000000006eb5c8] __asan_load8+0xac/0xe0
[16386.255326] [c00000016b2978a0] [c00000000013f898] reconfig_close_windows+0x1a0/0x4e8
[16386.255343] [c00000016b297990] [c000000000140e58] vas_migration_handler+0x3a4/0x3fc
[16386.255368] [c00000016b297a90] [c000000000128848] pseries_migrate_partition+0x4c/0x4c4
...
[16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s:
[16386.256149] kasan_save_stack+0x34/0x68
[16386.256163] kasan_save_track+0x34/0x80
[16386.256175] kasan_save_alloc_info+0x58/0x74
[16386.256196] __kasan_slab_alloc+0xb8/0xdc
[16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0
[16386.256225] vm_area_alloc+0x44/0x150
[16386.256245] mmap_region+0x214/0x10c4
[16386.256265] do_mmap+0x5fc/0x750
[16386.256277] vm_mmap_pgoff+0x14c/0x24c
[16386.256292] ksys_mmap_pgoff+0x20c/0x348
[16386.256303] sys_mmap+0xd0/0x160
...
[16386.256350] Freed by task 0 on cpu 31 at 16386.204848s:
[16386.256363] kasan_save_stack+0x34/0x68
[16386.256374] kasan_save_track+0x34/0x80
[16386.256384] kasan_save_free_info+0x64/0x10c
[16386.256396] __kasan_slab_free+0x120/0x204
[16386.256415] kmem_cache_free+0x128/0x450
[16386.256428] vm_area_free_rcu_cb+0xa8/0xd8
[16386.256441] rcu_do_batch+0x2c8/0xcf0
[16386.256458] rcu_core+0x378/0x3c4
[16386.256473] handle_softirqs+0x20c/0x60c
[16386.256495] do_softirq_own_stack+0x6c/0x88
[16386.256509] do_softirq_own_stack+0x58/0x88
[16386.256521] __irq_exit_rcu+0x1a4/0x20c
[16386.256533] irq_exit+0x20/0x38
[16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c
...
[16386.256717] Last potentially related work creation:
[16386.256729] kasan_save_stack+0x34/0x68
[16386.256741] __kasan_record_aux_stack+0xcc/0x12c
[16386.256753] __call_rcu_common.constprop.0+0x94/0xd04
[16386.256766] vm_area_free+0x28/0x3c
[16386.256778] remove_vma+0xf4/0x114
[16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870
[16386.256811] __vm_munmap+0xe0/0x1f8
[16386.256821] sys_munmap+0x54/0x6c
[16386.256830] system_call_exception+0x1a0/0x4a0
[16386.256841] system_call_vectored_common+0x15c/0x2ec
[16386.256868] The buggy address belongs to the object at c00000014a819670
which belongs to the cache vm_area_struct of size 168
[16386.256887] The buggy address is located 0 bytes inside of
freed 168-byte region [c00000014a819670, c00000014a819718)
[16386.256915] The buggy address belongs to the physical page:
[16386.256928] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a81
[16386.256950] memcg:c0000000ba430001
[16386.256961] anon flags: 0x43ffff800000000(node=4|zone=0|lastcpupid=0x7ffff)
[16386.256975] page_type: 0xfdffffff(slab)
[16386
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Prevent bad count for tracing_cpumask_write
If a large count is provided, it will trigger a warning in bitmap_parse_user.
Also check zero for it. |
