| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()
The simple_write_to_buffer() function will succeed if even a single
byte is initialized. However, we need to initialize the whole buffer
to prevent information leaks. Just use memdup_user(). |
| In the Linux kernel, the following vulnerability has been resolved:
tools/power turbostat: Fix file pointer leak
Currently if a fscanf fails then an early return leaks an open
file pointer. Fix this by fclosing the file before the return.
Detected using static analysis with cppcheck:
tools/power/x86/turbostat/turbostat.c:2039:3: error: Resource leak: fp [resourceLeak] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix the assign logic of iocb
commit 18ae8d12991b ("f2fs: show more DIO information in tracepoint")
introduces iocb field in 'f2fs_direct_IO_enter' trace event
And it only assigns the pointer and later it accesses its field
in trace print log.
Unable to handle kernel paging request at virtual address ffffffc04cef3d30
Mem abort info:
ESR = 0x96000007
EC = 0x25: DABT (current EL), IL = 32 bits
pc : trace_raw_output_f2fs_direct_IO_enter+0x54/0xa4
lr : trace_raw_output_f2fs_direct_IO_enter+0x2c/0xa4
sp : ffffffc0443cbbd0
x29: ffffffc0443cbbf0 x28: ffffff8935b120d0 x27: ffffff8935b12108
x26: ffffff8935b120f0 x25: ffffff8935b12100 x24: ffffff8935b110c0
x23: ffffff8935b10000 x22: ffffff88859a936c x21: ffffff88859a936c
x20: ffffff8935b110c0 x19: ffffff8935b10000 x18: ffffffc03b195060
x17: ffffff8935b11e76 x16: 00000000000000cc x15: ffffffef855c4f2c
x14: 0000000000000001 x13: 000000000000004e x12: ffff0000ffffff00
x11: ffffffef86c350d0 x10: 00000000000010c0 x9 : 000000000fe0002c
x8 : ffffffc04cef3d28 x7 : 7f7f7f7f7f7f7f7f x6 : 0000000002000000
x5 : ffffff8935b11e9a x4 : 0000000000006250 x3 : ffff0a00ffffff04
x2 : 0000000000000002 x1 : ffffffef86a0a31f x0 : ffffff8935b10000
Call trace:
trace_raw_output_f2fs_direct_IO_enter+0x54/0xa4
print_trace_fmt+0x9c/0x138
print_trace_line+0x154/0x254
tracing_read_pipe+0x21c/0x380
vfs_read+0x108/0x3ac
ksys_read+0x7c/0xec
__arm64_sys_read+0x20/0x30
invoke_syscall+0x60/0x150
el0_svc_common.llvm.1237943816091755067+0xb8/0xf8
do_el0_svc+0x28/0xa0
Fix it by copying the required variables for printing and while at
it fix the similar issue at some other places in the same file. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/gntdev: Accommodate VMA splitting
Prior to this commit, the gntdev driver code did not handle the
following scenario correctly with paravirtualized (PV) Xen domains:
* User process sets up a gntdev mapping composed of two grant mappings
(i.e., two pages shared by another Xen domain).
* User process munmap()s one of the pages.
* User process munmap()s the remaining page.
* User process exits.
In the scenario above, the user process would cause the kernel to log
the following messages in dmesg for the first munmap(), and the second
munmap() call would result in similar log messages:
BUG: Bad page map in process doublemap.test pte:... pmd:...
page:0000000057c97bff refcount:1 mapcount:-1 \
mapping:0000000000000000 index:0x0 pfn:...
...
page dumped because: bad pte
...
file:gntdev fault:0x0 mmap:gntdev_mmap [xen_gntdev] readpage:0x0
...
Call Trace:
<TASK>
dump_stack_lvl+0x46/0x5e
print_bad_pte.cold+0x66/0xb6
unmap_page_range+0x7e5/0xdc0
unmap_vmas+0x78/0xf0
unmap_region+0xa8/0x110
__do_munmap+0x1ea/0x4e0
__vm_munmap+0x75/0x120
__x64_sys_munmap+0x28/0x40
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
...
For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG)
would print out the following and trigger a general protection fault in
the affected Xen PV domain:
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
As of this writing, gntdev_grant_map structure's vma field (referred to
as map->vma below) is mainly used for checking the start and end
addresses of mappings. However, with split VMAs, these may change, and
there could be more than one VMA associated with a gntdev mapping.
Hence, remove the use of map->vma and rely on map->pages_vm_start for
the original start address and on (map->count << PAGE_SHIFT) for the
original mapping size. Let the invalidate() and find_special_page()
hooks use these.
Also, given that there can be multiple VMAs associated with a gntdev
mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to
the end of gntdev_put_map, so that the MMU notifier is only removed
after the closing of the last remaining VMA.
Finally, use an atomic to prevent inadvertent gntdev mapping re-use,
instead of using the map->live_grants atomic counter and/or the map->vma
pointer (the latter of which is now removed). This prevents the
userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the
same address range as a previously set up gntdev mapping. This scenario
can be summarized with the following call-trace, which was valid prior
to this commit:
mmap
gntdev_mmap
mmap (repeat mmap with MAP_FIXED over the same address range)
gntdev_invalidate
unmap_grant_pages (sets 'being_removed' entries to true)
gnttab_unmap_refs_async
unmap_single_vma
gntdev_mmap (maps the shared pages again)
munmap
gntdev_invalidate
unmap_grant_pages
(no-op because 'being_removed' entries are true)
unmap_single_vma (For PV domains, Xen reports that a granted page
is being unmapped and triggers a general protection fault in the
affected domain, if Xen was built with CONFIG_DEBUG)
The fix for this last scenario could be worth its own commit, but we
opted for a single commit, because removing the gntdev_grant_map
structure's vma field requires guarding the entry to gntdev_mmap(), and
the live_grants atomic counter is not sufficient on its own to prevent
the mmap() over a pre-existing mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
macintosh: fix possible memory leak in macio_add_one_device()
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed. |
| SteelSeries Nahimic 3 1.10.7 allows Directory traversal. |
| An Improper Check or Handling of Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
If an attacker sends a specific MPLS packet, which upon processing, causes an internal loop, that leads to a PFE crash and restart. Continued receipt of these packets leads to a sustained Denial of Service (DoS) condition.
Circuit cross-connect (CCC) needs to be configured on the device for it to be affected by this issue.
This issue only affects MX Series with MPC10, MPC11, LC9600, and MX304.
This issue affects:
Juniper Networks Junos OS
21.4 versions from 21.4R3 earlier than 21.4R3-S5;
22.2 versions from 22.2R2 earlier than 22.2R3-S2;
22.3 versions from 22.3R1 earlier than 22.3R2-S2;
22.3 versions from 22.3R3 earlier than 22.3R3-S1
22.4 versions from 22.4R1 earlier than 22.4R2-S2, 22.4R3;
23.2 versions earlier than 23.2R1-S1, 23.2R2. |
| A Cleartext Storage in a File on Disk vulnerability in Juniper Networks Junos OS Evolved ACX Series devices using the Paragon Active Assurance Test Agent software installed on network devices allows a local, authenticated attacker with high privileges to read all other users login credentials.
This issue affects only Juniper Networks Junos OS Evolved ACX Series devices using the Paragon Active Assurance Test Agent software installed on these devices from 23.1R1-EVO through 23.2R2-EVO.
This issue does not affect releases before 23.1R1-EVO. |
| An Improper Isolation or Compartmentalization vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on QFX5000 Series and EX Series allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
If a specific malformed LACP packet is received by a QFX5000 Series, or an EX4400, EX4100 or EX4650 Series device, an LACP flap will occur resulting in traffic loss.
This issue affects Junos OS on QFX5000 Series, and on EX4400, EX4100 or EX4650 Series:
* 20.4 versions from
20.4R3-S4
before 20.4R3-S8,
* 21.2 versions from
21.2R3-S2
before 21.2R3-S6,
* 21.4 versions from
21.4R2
before 21.4R3-S4,
* 22.1 versions from
22.1R2
before 22.1R3-S3,
* 22.2 versions before 22.2R3-S1,
* 22.3 versions before 22.3R2-S2, 22.3R3,
* 22.4 versions before 22.4R2-S1, 22.4R3. |
| A Stack-based Buffer Overflow vulnerability in Flow Processing Daemon (flowd) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS).
On all Junos OS MX Series platforms with SPC3 and MS-MPC/-MIC, when URL filtering is enabled and a specific URL request is received and processed, flowd will crash and restart. Continuous reception of the specific URL request will lead to a sustained Denial of Service (DoS) condition.
This issue affects:
Junos OS:
* all versions before 21.2R3-S6,
* from 21.3 before 21.3R3-S5,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3-S3,
* from 22.2 before 22.2R3-S1,
* from 22.3 before 22.3R2-S2, 22.3R3,
* from 22.4 before 22.4R2-S1, 22.4R3. |
| The Really Simple Security (Free, Pro, and Pro Multisite) plugins for WordPress are vulnerable to authentication bypass in versions 9.0.0 to 9.1.1.1. This is due to improper user check error handling in the two-factor REST API actions with the 'check_login_and_get_user' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, when the "Two-Factor Authentication" setting is enabled (disabled by default). |
| An Out-of-bounds Read vulnerability in the advanced forwarding management process aftman of Juniper Networks Junos OS on MX Series with MPC10E, MPC11, MX10K-LC9600 line cards, MX304, and EX9200-15C, may allow an attacker to exploit a stack-based buffer overflow, leading to a reboot of the FPC.
Through code review, it was determined that the interface definition code for aftman could read beyond a buffer boundary, leading to a stack-based buffer overflow.
This issue affects Junos OS on MX Series and EX9200-15C:
* from 21.2 before 21.2R3-S1,
* from 21.4 before 21.4R3,
* from 22.1 before 22.1R2,
* from 22.2 before 22.2R2;
This issue does not affect:
* versions of Junos OS prior to 20.3R1;
* any version of Junos OS 20.4. |
| An arbitrary file deletion vulnerability has been identified in the command-line interface of mobility conductors running either AOS-10 or AOS-8 operating systems. Successful exploitation of this vulnerability could allow an authenticated remote malicious actor to delete arbitrary files within the affected system. |
| Multiple out-of-bounds read vulnerabilities were identified in a system component responsible for handling certain data buffers. Due to insufficient validation of maximum buffer size values, the process may attempt to read beyond the intended memory region. Under specific conditions, this can result in a crash of the affected process and a potential denial-of-service of the compromised process. |
| Uploading unvalidated container images may allow remote attackers to gain full access to the system, potentially compromising its integrity and confidentiality. |
| Multiple out-of-bounds read vulnerabilities were identified in a system component responsible for handling certain data buffers. Due to insufficient validation of maximum buffer size values, the process may attempt to read beyond the intended memory region. Under specific conditions, this can result in a crash of the affected process and a potential denial-of-service of the compromised process. |
| The AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. Users who use IAM OIDC custom resource provider package will download CA Thumbprints as part of the custom resource workflow. However, the current `tls.connect` method will always set `rejectUnauthorized: false` which is a potential security concern. CDK should follow the best practice and set `rejectUnauthorized: true`. However, this could be a breaking change for existing CDK applications and we should fix this with a feature flag. Note that this is marked as low severity Security advisory because the issuer url is provided by CDK users who define the CDK application. If they insist on connecting to a unauthorized OIDC provider, CDK should not disallow this. Additionally, the code block is run in a Lambda environment which mitigate the MITM attack. The patch is in progress. To mitigate, upgrade to CDK v2.177.0 (Expected release date 2025-02-22). Once upgraded, users should make sure the feature flag '@aws-cdk/aws-iam:oidcRejectUnauthorizedConnections' is set to true in `cdk.context.json` or `cdk.json`. There are no known workarounds for this vulnerability. |
| Arbitrary file deletion vulnerability have been identified in a system function of mobility conductors running AOS-8 operating system. Successful exploitation of this vulnerability could allow an unauthenticated remote malicious actor to delete arbitrary files within the affected system and potentially result in denial-of-service conditions on affected devices. |
| FreeImage 3.18.0 contains a Use After Free in PluginTARGA.cpp;loadRLE(). |
| A stored cross-site scripting (XSS) vulnerability exists in pH7Software pH7-Social-Dating-CMS 17.9.1 in the user profile Description field. |
